From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@stericsson.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFC/RFT 3/7] regulator: ab8500: Use regulator_list_voltage_table()
Date: Sun, 20 May 2012 10:33:35 +0800 [thread overview]
Message-ID: <1337481215.7204.4.camel@phoenix> (raw)
In-Reply-To: <1337481021.7204.1.camel@phoenix>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/ab8500.c | 64 ++++++++++++++++---------------------------
1 files changed, 24 insertions(+), 40 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index e1b8c54..da883e6 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -40,8 +40,6 @@
* @voltage_bank: bank to control regulator voltage
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
- * @voltages: supported voltage table
- * @voltages_len: number of supported voltages for the regulator
* @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
@@ -58,13 +56,11 @@ struct ab8500_regulator_info {
u8 voltage_bank;
u8 voltage_reg;
u8 voltage_mask;
- int const *voltages;
- int voltages_len;
unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
-static const int ldo_vauxn_voltages[] = {
+static const unsigned int ldo_vauxn_voltages[] = {
1100000,
1200000,
1300000,
@@ -83,7 +79,7 @@ static const int ldo_vauxn_voltages[] = {
3300000,
};
-static const int ldo_vaux3_voltages[] = {
+static const unsigned int ldo_vaux3_voltages[] = {
1200000,
1500000,
1800000,
@@ -94,7 +90,7 @@ static const int ldo_vaux3_voltages[] = {
2910000,
};
-static const int ldo_vintcore_voltages[] = {
+static const unsigned int ldo_vintcore_voltages[] = {
1200000,
1225000,
1250000,
@@ -185,25 +181,6 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
return false;
}
-static int ab8500_list_voltage(struct regulator_dev *rdev, unsigned selector)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- if (info == NULL) {
- dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
- return -EINVAL;
- }
-
- /* return the uV for the fixed regulators */
- if (info->fixed_uV)
- return info->fixed_uV;
-
- if (selector >= info->voltages_len)
- return -EINVAL;
-
- return info->voltages[selector];
-}
-
static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
int ret, val;
@@ -296,11 +273,24 @@ static struct regulator_ops ab8500_regulator_ops = {
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
+static int ab8500_fixed_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+
+ if (info == NULL) {
+ dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
+ return -EINVAL;
+ }
+
+ return info->fixed_uV;
+}
+
static int ab8500_fixed_get_voltage(struct regulator_dev *rdev)
{
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
@@ -318,7 +308,7 @@ static struct regulator_ops ab8500_regulator_fixed_ops = {
.disable = ab8500_regulator_disable,
.is_enabled = ab8500_regulator_is_enabled,
.get_voltage = ab8500_fixed_get_voltage,
- .list_voltage = ab8500_list_voltage,
+ .list_voltage = ab8500_fixed_list_voltage,
.enable_time = ab8500_regulator_enable_time,
.set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
@@ -329,7 +319,7 @@ static struct ab8500_regulator_info
* Variable Voltage Regulators
* name, min mV, max mV,
* update bank, reg, mask, enable val
- * volt bank, reg, mask, table, table length
+ * volt bank, reg, mask
*/
[AB8500_LDO_AUX1] = {
.desc = {
@@ -339,6 +329,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX1,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -349,8 +340,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x1f,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX2] = {
.desc = {
@@ -360,6 +349,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX2,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
+ .volt_table = ldo_vauxn_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -370,8 +360,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x20,
.voltage_mask = 0x0f,
- .voltages = ldo_vauxn_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vauxn_voltages),
},
[AB8500_LDO_AUX3] = {
.desc = {
@@ -381,6 +369,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_AUX3,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
+ .volt_table = ldo_vaux3_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -391,8 +380,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x04,
.voltage_reg = 0x21,
.voltage_mask = 0x07,
- .voltages = ldo_vaux3_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vaux3_voltages),
},
[AB8500_LDO_INTCORE] = {
.desc = {
@@ -402,6 +389,7 @@ static struct ab8500_regulator_info
.id = AB8500_LDO_INTCORE,
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
+ .volt_table = ldo_vintcore_voltages,
},
.min_uV = 1100000,
.max_uV = 3300000,
@@ -412,8 +400,6 @@ static struct ab8500_regulator_info
.voltage_bank = 0x03,
.voltage_reg = 0x80,
.voltage_mask = 0x38,
- .voltages = ldo_vintcore_voltages,
- .voltages_len = ARRAY_SIZE(ldo_vintcore_voltages),
},
/*
@@ -769,9 +755,7 @@ static __devinit int ab8500_regulator_register(struct platform_device *pdev,
if (info->desc.id == AB8500_LDO_AUX3) {
info->desc.n_voltages =
ARRAY_SIZE(ldo_vauxn_voltages);
- info->voltages = ldo_vauxn_voltages;
- info->voltages_len =
- ARRAY_SIZE(ldo_vauxn_voltages);
+ info->desc.volt_table = ldo_vauxn_voltages;
info->voltage_mask = 0xf;
}
}
--
1.7.5.4
next prev parent reply other threads:[~2012-05-20 2:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-20 2:30 [PATCH RFC/RFT 1/7] regulator: core: Allow drivers to set voltage mapping table in regulator_desc Axel Lin
2012-05-20 2:31 ` [PATCH RFC/RFT 2/7] regulator: ab3100: Use regulator_list_voltage_table() Axel Lin
2012-05-21 9:16 ` Linus Walleij
2012-05-20 2:33 ` Axel Lin [this message]
2012-05-21 10:43 ` [PATCH RFC/RFT 3/7] regulator: ab8500: " Linus Walleij
2012-05-21 11:17 ` Mark Brown
2012-05-20 2:34 ` [PATCH RFC/RFT 4/7] regulator: lp3971: " Axel Lin
2012-05-20 2:36 ` [PATCH RFC/RFT 5/7] regulator: lp3972: " Axel Lin
2012-05-20 2:37 ` [PATCH RFC/RFT 6/7] regulator: tps6105x: " Axel Lin
2012-05-21 16:06 ` Linus Walleij
2012-05-20 2:39 ` [PATCH RFC/RFT 7/7] regulator: tps6507x: " Axel Lin
2012-05-20 21:48 ` [PATCH RFC/RFT 1/7] regulator: core: Allow drivers to set voltage mapping table in regulator_desc Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337481215.7204.4.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox