From: Andi Kleen <andi@firstfloor.org>
To: linux-kernel@vger.kernel.org
Cc: Andi Kleen <ak@linux.intel.com>, penberg@kernel.org, cl@linux.com
Subject: [PATCH] slab/mempolicy: always use local policy from interrupt context v3
Date: Wed, 30 May 2012 21:34:04 -0700 [thread overview]
Message-ID: <1338438844-5022-1-git-send-email-andi@firstfloor.org> (raw)
From: Andi Kleen <ak@linux.intel.com>
slab_node() could access current->mempolicy from interrupt context.
However there's a race condition during exit where the mempolicy
is first freed and then the pointer zeroed.
Using this from interrupts seems bogus anyways. The interrupt
will interrupt a random process and therefore get a random
mempolicy. Many times, this will be idle's, which noone can change.
Just disable this here and always use local for slab
from interrupts. I also cleaned up the callers of slab_node a bit
which always passed the same argument.
I believe the original mempolicy code did that in fact,
so it's likely a regression.
v2: send version with correct logic
v3: simplify. fix typo.
Reported-by: Arun Sharma <asharma@fb.com>
Cc: penberg@kernel.org
Cc: cl@linux.com
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
include/linux/mempolicy.h | 2 +-
mm/mempolicy.c | 6 ++++--
mm/slab.c | 4 ++--
mm/slub.c | 2 +-
4 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 7c727a9..7106786 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -215,7 +215,7 @@ extern struct zonelist *huge_zonelist(struct vm_area_struct *vma,
extern bool init_nodemask_of_mempolicy(nodemask_t *mask);
extern bool mempolicy_nodemask_intersects(struct task_struct *tsk,
const nodemask_t *mask);
-extern unsigned slab_node(struct mempolicy *policy);
+extern unsigned slab_node(void);
extern enum zone_type policy_zone;
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index cfb6c86..b65eb06 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1586,9 +1586,11 @@ static unsigned interleave_nodes(struct mempolicy *policy)
* task can change it's policy. The system default policy requires no
* such protection.
*/
-unsigned slab_node(struct mempolicy *policy)
+unsigned slab_node(void)
{
- if (!policy || policy->flags & MPOL_F_LOCAL)
+ struct mempolicy *policy = current->mempolicy;
+
+ if (in_interrupt() || !policy || policy->flags & MPOL_F_LOCAL)
return numa_node_id();
switch (policy->mode) {
diff --git a/mm/slab.c b/mm/slab.c
index e901a36..af3b405 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3336,7 +3336,7 @@ static void *alternate_node_alloc(struct kmem_cache *cachep, gfp_t flags)
if (cpuset_do_slab_mem_spread() && (cachep->flags & SLAB_MEM_SPREAD))
nid_alloc = cpuset_slab_spread_node();
else if (current->mempolicy)
- nid_alloc = slab_node(current->mempolicy);
+ nid_alloc = slab_node();
if (nid_alloc != nid_here)
return ____cache_alloc_node(cachep, flags, nid_alloc);
return NULL;
@@ -3368,7 +3368,7 @@ static void *fallback_alloc(struct kmem_cache *cache, gfp_t flags)
retry_cpuset:
cpuset_mems_cookie = get_mems_allowed();
- zonelist = node_zonelist(slab_node(current->mempolicy), flags);
+ zonelist = node_zonelist(slab_node(), flags);
retry:
/*
diff --git a/mm/slub.c b/mm/slub.c
index ffe13fd..ef936f3 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1614,7 +1614,7 @@ static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags,
do {
cpuset_mems_cookie = get_mems_allowed();
- zonelist = node_zonelist(slab_node(current->mempolicy), flags);
+ zonelist = node_zonelist(slab_node(), flags);
for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) {
struct kmem_cache_node *n;
--
1.7.7.6
next reply other threads:[~2012-05-31 4:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-31 4:34 Andi Kleen [this message]
2012-05-31 14:13 ` [PATCH] slab/mempolicy: always use local policy from interrupt context v3 Christoph Lameter
2012-05-31 20:45 ` David Rientjes
2012-06-01 6:41 ` Pekka Enberg
2012-06-01 14:10 ` Christoph Lameter
2012-06-09 9:40 ` [PATCH v5] slab/mempolicy: always use local policy from interrupt context David Mackey
2012-06-10 2:19 ` David Rientjes
2012-06-17 1:11 ` David Rientjes
2012-06-17 10:37 ` Pekka Enberg
2012-06-11 15:05 ` Christoph Lameter
2012-06-18 8:20 ` KOSAKI Motohiro
2012-06-20 7:02 ` Pekka Enberg
-- strict thread matches above, loose matches on Subject: below --
2012-05-07 22:55 [PATCH] slab/mempolicy: always use local policy from interrupt context v3 Andi Kleen
2012-05-07 23:47 ` KOSAKI Motohiro
2012-05-09 4:59 ` David Rientjes
2012-05-09 8:03 ` KOSAKI Motohiro
2012-05-30 6:47 ` Pekka Enberg
2012-05-30 15:40 ` Christoph Lameter
2012-05-30 16:32 ` Andi Kleen
2012-05-30 21:30 ` David Rientjes
2012-05-31 7:43 ` Pekka Enberg
2012-05-08 14:03 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338438844-5022-1-git-send-email-andi@firstfloor.org \
--to=andi@firstfloor.org \
--cc=ak@linux.intel.com \
--cc=cl@linux.com \
--cc=linux-kernel@vger.kernel.org \
--cc=penberg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox