From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Graeme Gregory <gg@slimlogic.co.uk>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH v2] regulator: palmas: Slightly code change for better readability
Date: Wed, 06 Jun 2012 20:01:38 +0800 [thread overview]
Message-ID: <1338984098.5195.1.camel@phoenix> (raw)
It's a little bit hard to read that the "else" case means id == PALMAS_REG_SMPS10.
if (id != PALMAS_REG_SMPS10){
do something for the cases id != PALMAS_REG_SMPS10;
} else {
do something for the case id == PALMAS_REG_SMPS10;
}
This patch changes above syntax to switch statement.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/palmas-regulator.c | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index b4e10b0..112436b 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -517,7 +517,15 @@ static int palmas_smps_init(struct palmas *palmas, int id,
if (ret)
return ret;
- if (id != PALMAS_REG_SMPS10) {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
+ if (reg_init->mode_sleep) {
+ reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
+ reg |= reg_init->mode_sleep <<
+ PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
+ }
+ break;
+ default:
if (reg_init->warm_reset)
reg |= PALMAS_SMPS12_CTRL_WR_S;
@@ -529,14 +537,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
reg |= reg_init->mode_sleep <<
PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT;
}
- } else {
- if (reg_init->mode_sleep) {
- reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
- reg |= reg_init->mode_sleep <<
- PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT;
- }
-
}
+
ret = palmas_smps_write(palmas, addr, reg);
if (ret)
return ret;
@@ -660,10 +662,8 @@ static __devinit int palmas_probe(struct platform_device *pdev)
pmic->desc[id].name = palmas_regs_info[id].name;
pmic->desc[id].id = id;
- if (id != PALMAS_REG_SMPS10) {
- pmic->desc[id].ops = &palmas_ops_smps;
- pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
- } else {
+ switch (id) {
+ case PALMAS_REG_SMPS10:
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg = PALMAS_SMPS10_CTRL;
@@ -672,6 +672,10 @@ static __devinit int palmas_probe(struct platform_device *pdev)
pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
pmic->desc[id].min_uV = 3750000;
pmic->desc[id].uV_step = 1250000;
+ break;
+ default:
+ pmic->desc[id].ops = &palmas_ops_smps;
+ pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
}
pmic->desc[id].type = REGULATOR_VOLTAGE;
--
1.7.9.5
next reply other threads:[~2012-06-06 12:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 12:01 Axel Lin [this message]
2012-06-06 14:43 ` [PATCH v2] regulator: palmas: Slightly code change for better readability Graeme Gregory
2012-06-07 23:37 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338984098.5195.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=gg@slimlogic.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox