public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Chiwoong Byun <woong.byun@samsung.com>,
	Jonghwa Lee <jonghwa3.lee@samsung.com>,
	Myungjoo Ham <myungjoo.ham@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Yadwinder Singh Brar <yadi.brar@samsung.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>
Subject: [PATCH] regulator: max77686: Check pdata->num_regulators earlier
Date: Fri, 08 Jun 2012 12:03:04 +0800	[thread overview]
Message-ID: <1339128184.8259.1.camel@phoenix> (raw)

If this driver only works when pdata->num_regulators == MAX77686_REGULATORS,
let's check it earlier.

Also remove unused num_regulators from struct max77686_data.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 drivers/regulator/max77686.c |   43 +++++++++++++++++++-----------------------
 1 file changed, 19 insertions(+), 24 deletions(-)

diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index b76a038..b0c146d 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -65,7 +65,6 @@ enum max77686_ramp_rate {
 struct max77686_data {
 	struct device *dev;
 	struct max77686_dev *iodev;
-	int num_regulators;
 	struct regulator_dev **rdev;
 	int ramp_delay; /* in mV/us */
 };
@@ -235,6 +234,12 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
+	if (!pdata || pdata->num_regulators != MAX77686_REGULATORS) {
+		dev_err(&pdev->dev,
+			"Invalid initial data for regulator's initialiation\n");
+		return -EINVAL;
+	}
+
 	max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
 				GFP_KERNEL);
 	if (!max77686)
@@ -248,8 +253,6 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 	rdev = max77686->rdev;
 	max77686->dev = &pdev->dev;
 	max77686->iodev = iodev;
-	if (pdata)
-		max77686->num_regulators = pdata->num_regulators;
 	platform_set_drvdata(pdev, max77686);
 
 	max77686->ramp_delay = RAMP_RATE_NO_CTRL; /* Set 0x3 for RAMP */
@@ -263,34 +266,26 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 			MAX77686_REG_BUCK4CTRL1, MAX77686_RAMP_RATE_MASK,
 			max77686->ramp_delay << 6);
 
-	if (pdata->num_regulators == MAX77686_REGULATORS) {
-		for (i = 0; i < MAX77686_REGULATORS; i++) {
-			config.dev = max77686->dev;
-			config.regmap = iodev->regmap;
-			config.driver_data = max77686;
-			config.init_data = pdata->regulators[i].initdata;
-
-			rdev[i] = regulator_register(&regulators[i], &config);
-
-			if (IS_ERR(rdev[i])) {
-				ret = PTR_ERR(rdev[i]);
-				dev_err(max77686->dev,
+	for (i = 0; i < MAX77686_REGULATORS; i++) {
+		config.dev = max77686->dev;
+		config.regmap = iodev->regmap;
+		config.driver_data = max77686;
+		config.init_data = pdata->regulators[i].initdata;
+
+		rdev[i] = regulator_register(&regulators[i], &config);
+		if (IS_ERR(rdev[i])) {
+			ret = PTR_ERR(rdev[i]);
+			dev_err(max77686->dev,
 				"regulator init failed for %d\n", i);
 				rdev[i] = NULL;
 				goto err;
-			}
 		}
-	} else {
-		dev_err(max77686->dev,
-			 "Lack of initial data for regulator's initialiation\n");
-		return -EINVAL;
 	}
+
 	return 0;
 err:
-	for (i = 0; i < MAX77686_REGULATORS; i++) {
-		if (rdev[i])
-			regulator_unregister(rdev[i]);
-	}
+	while (--i >= 0)
+		regulator_unregister(rdev[i]);
 	return ret;
 }
 
-- 
1.7.9.5




             reply	other threads:[~2012-06-08  4:03 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-08  4:03 Axel Lin [this message]
2012-06-11  3:44 ` [PATCH] regulator: max77686: Check pdata->num_regulators earlier Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1339128184.8259.1.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=jonghwa3.lee@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=woong.byun@samsung.com \
    --cc=yadi.brar@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox