From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Lee Jones <lee.jones@linaro.org>,
Linus Walleij <linus.walleij@stericsson.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT] regulator: ab3100: Convert fixed voltage to use regulator_list_voltage_linear
Date: Mon, 11 Jun 2012 10:14:28 +0800 [thread overview]
Message-ID: <1339380868.13491.1.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/ab3100.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index b088b6c..16d420b 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -43,15 +43,12 @@
* @dev: handle to the device
* @plfdata: AB3100 platform data passed in at probe time
* @regreg: regulator register number in the AB3100
- * @fixed_voltage: a fixed voltage for this regulator, if this
- * 0 the voltages array is used instead.
*/
struct ab3100_regulator {
struct regulator_dev *rdev;
struct device *dev;
struct ab3100_platform_data *plfdata;
u8 regreg;
- int fixed_voltage;
};
/* The order in which registers are initialized */
@@ -121,15 +118,12 @@ static struct ab3100_regulator
ab3100_regulators[AB3100_NUM_REGULATORS] = {
{
.regreg = AB3100_LDO_A,
- .fixed_voltage = LDO_A_VOLTAGE,
},
{
.regreg = AB3100_LDO_C,
- .fixed_voltage = LDO_C_VOLTAGE,
},
{
.regreg = AB3100_LDO_D,
- .fixed_voltage = LDO_D_VOLTAGE,
},
{
.regreg = AB3100_LDO_E,
@@ -246,10 +240,6 @@ static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
u8 regval;
int err;
- /* Return the voltage for fixed regulators immediately */
- if (abreg->fixed_voltage)
- return abreg->fixed_voltage;
-
/*
* For variable types, read out setting and index into
* supplied voltage list.
@@ -382,11 +372,17 @@ static int ab3100_enable_time_regulator(struct regulator_dev *reg)
return 0;
}
+static int ab3100_get_fixed_voltage_regulator(struct regulator_dev *reg)
+{
+ return reg->desc->min_uV;
+}
+
static struct regulator_ops regulator_ops_fixed = {
+ .list_voltage = regulator_list_voltage_linear,
.enable = ab3100_enable_regulator,
.disable = ab3100_disable_regulator,
.is_enabled = ab3100_is_enabled_regulator,
- .get_voltage = ab3100_get_voltage_regulator,
+ .get_voltage = ab3100_get_fixed_voltage_regulator,
.enable_time = ab3100_enable_time_regulator,
};
@@ -430,22 +426,28 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
.name = "LDO_A",
.id = AB3100_LDO_A,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_A_VOLTAGE,
},
{
.name = "LDO_C",
.id = AB3100_LDO_C,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_C_VOLTAGE,
},
{
.name = "LDO_D",
.id = AB3100_LDO_D,
.ops = ®ulator_ops_fixed,
+ .n_voltages = 1,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
+ .min_uV = LDO_D_VOLTAGE,
},
{
.name = "LDO_E",
--
1.7.9.5
next reply other threads:[~2012-06-11 2:14 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-11 2:14 Axel Lin [this message]
2012-06-17 14:21 ` [PATCH RFT] regulator: ab3100: Convert fixed voltage to use regulator_list_voltage_linear Linus Walleij
2012-06-17 20:06 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1339380868.13491.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox