From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Grant Likely <grant.likely@secretlab.ca>,
Linus Walleij <linus.walleij@stericsson.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH] gpiolib: Add support for Wolfson Microelectronics Arizona class devices
Date: Sat, 23 Jun 2012 13:29:25 +0100 [thread overview]
Message-ID: <1340454566-7206-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
The Arizona class devices provide some GPIOs for use in the system. This
driver provides support for these via gpiolib. Currently interrupts are
not supported, normally the GPIOs are outputs only.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/gpio/Kconfig | 6 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-arizona.c | 162 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 169 insertions(+)
create mode 100644 drivers/gpio/gpio-arizona.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c4067d0..9c713e9 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -253,6 +253,12 @@ config GPIO_GE_FPGA
comment "I2C GPIO expanders:"
+config GPIO_ARIZONA
+ tristate "Wolfson Microelectronics Arizona class devices"
+ depends on MFD_ARIZONA
+ help
+ Support for GPIOs on Wolfson Arizona class devices.
+
config GPIO_MAX7300
tristate "Maxim MAX7300 GPIO expander"
depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 0f55662..e173970 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o
obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o
obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
+obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c
new file mode 100644
index 0000000..0c1becf
--- /dev/null
+++ b/drivers/gpio/gpio-arizona.c
@@ -0,0 +1,162 @@
+/*
+ * gpiolib support for Wolfson Arizona class devices
+ *
+ * Copyright 2012 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/pdata.h>
+#include <linux/mfd/arizona/registers.h>
+
+struct arizona_gpio {
+ struct arizona *arizona;
+ struct gpio_chip gpio_chip;
+};
+
+static inline struct arizona_gpio *to_arizona_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct arizona_gpio, gpio_chip);
+}
+
+static int arizona_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+ struct arizona *arizona = arizona_gpio->arizona;
+
+ return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+ ARIZONA_GPN_DIR, ARIZONA_GPN_DIR);
+}
+
+static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+ struct arizona *arizona = arizona_gpio->arizona;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & ARIZONA_GPN_LVL)
+ return 1;
+ else
+ return 0;
+}
+
+static int arizona_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+ struct arizona *arizona = arizona_gpio->arizona;
+
+ if (value)
+ value = ARIZONA_GPN_LVL;
+
+ return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+ ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value);
+}
+
+static void arizona_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct arizona_gpio *arizona_gpio = to_arizona_gpio(chip);
+ struct arizona *arizona = arizona_gpio->arizona;
+
+ if (value)
+ value = ARIZONA_GPN_LVL;
+
+ regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset,
+ ARIZONA_GPN_LVL, value);
+}
+
+static struct gpio_chip template_chip = {
+ .label = "arizona",
+ .owner = THIS_MODULE,
+ .direction_input = arizona_gpio_direction_in,
+ .get = arizona_gpio_get,
+ .direction_output = arizona_gpio_direction_out,
+ .set = arizona_gpio_set,
+ .can_sleep = 1,
+};
+
+static int __devinit arizona_gpio_probe(struct platform_device *pdev)
+{
+ struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+ struct arizona_pdata *pdata = arizona->dev->platform_data;
+ struct arizona_gpio *arizona_gpio;
+ int ret;
+
+ arizona_gpio = devm_kzalloc(&pdev->dev, sizeof(*arizona_gpio),
+ GFP_KERNEL);
+ if (arizona_gpio == NULL)
+ return -ENOMEM;
+
+ arizona_gpio->arizona = arizona;
+ arizona_gpio->gpio_chip = template_chip;
+ arizona_gpio->gpio_chip.dev = &pdev->dev;
+
+ switch (arizona->type) {
+ case WM5102:
+ arizona_gpio->gpio_chip.ngpio = 5;
+ break;
+ default:
+ dev_err(&pdev->dev, "Unknown chip variant %d\n",
+ arizona->type);
+ return -EINVAL;
+ }
+
+ if (pdata && pdata->gpio_base)
+ arizona_gpio->gpio_chip.base = pdata->gpio_base;
+ else
+ arizona_gpio->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&arizona_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+ ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, arizona_gpio);
+
+ return ret;
+
+err:
+ return ret;
+}
+
+static int __devexit arizona_gpio_remove(struct platform_device *pdev)
+{
+ struct arizona_gpio *arizona_gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&arizona_gpio->gpio_chip);
+}
+
+static struct platform_driver arizona_gpio_driver = {
+ .driver.name = "arizona-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = arizona_gpio_probe,
+ .remove = __devexit_p(arizona_gpio_remove),
+};
+
+module_platform_driver(arizona_gpio_driver);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for Arizona devices");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:arizona-gpio");
--
1.7.10
next reply other threads:[~2012-06-23 12:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-23 12:29 Mark Brown [this message]
2012-06-25 19:13 ` [PATCH] gpiolib: Add support for Wolfson Microelectronics Arizona class devices Linus Walleij
2012-06-25 22:30 ` Mark Brown
2012-06-25 22:32 ` Mark Brown
2012-07-05 13:23 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340454566-7206-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=grant.likely@secretlab.ca \
--cc=linus.walleij@stericsson.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox