From: Axel Lin <axel.lin@gmail.com>
To: Thierry Reding <thierry.reding@avionic-design.de>
Cc: linux-kernel@vger.kernel.org, Eric Miao <eric.y.miao@gmail.com>
Subject: [PATCH 2/4] pwm: Convert pwm-pxa to use devm_* APIs
Date: Fri, 29 Jun 2012 21:31:22 +0800 [thread overview]
Message-ID: <1340976682.4752.1.camel@phoenix> (raw)
In-Reply-To: <1340976628.4752.0.camel@phoenix>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/pwm/pwm-pxa.c | 49 ++++++++++---------------------------------------
1 file changed, 10 insertions(+), 39 deletions(-)
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index d5c6ce5..1cf0597 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/arm/mach-pxa/pwm.c
+ * drivers/pwm/pwm-pxa.c
*
* simple driver for PWM (Pulse Width Modulator) controller
*
@@ -145,17 +145,16 @@ static int __devinit pwm_probe(struct platform_device *pdev)
struct resource *r;
int ret = 0;
- pwm = kzalloc(sizeof(*pwm), GFP_KERNEL);
+ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
if (pwm == NULL) {
dev_err(&pdev->dev, "failed to allocate memory\n");
return -ENOMEM;
}
- pwm->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(pwm->clk)) {
- ret = PTR_ERR(pwm->clk);
- goto err_free;
- }
+ pwm->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(pwm->clk))
+ return PTR_ERR(pwm->clk);
+
pwm->clk_enabled = 0;
pwm->chip.dev = &pdev->dev;
@@ -166,23 +165,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (r == NULL) {
dev_err(&pdev->dev, "no memory resource defined\n");
- ret = -ENODEV;
- goto err_free_clk;
- }
-
- r = request_mem_region(r->start, resource_size(r), pdev->name);
- if (r == NULL) {
- dev_err(&pdev->dev, "failed to request memory resource\n");
- ret = -EBUSY;
- goto err_free_clk;
+ return -ENODEV;
}
- pwm->mmio_base = ioremap(r->start, resource_size(r));
- if (pwm->mmio_base == NULL) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -ENODEV;
- goto err_free_mem;
- }
+ pwm->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
+ if (pwm->mmio_base == NULL)
+ return -ENODEV;
ret = pwmchip_add(&pwm->chip);
if (ret < 0) {
@@ -192,34 +180,17 @@ static int __devinit pwm_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, pwm);
return 0;
-
-err_free_mem:
- release_mem_region(r->start, resource_size(r));
-err_free_clk:
- clk_put(pwm->clk);
-err_free:
- kfree(pwm);
- return ret;
}
static int __devexit pwm_remove(struct platform_device *pdev)
{
struct pxa_pwm_chip *chip;
- struct resource *r;
chip = platform_get_drvdata(pdev);
if (chip == NULL)
return -ENODEV;
pwmchip_remove(&chip->chip);
-
- iounmap(chip->mmio_base);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, resource_size(r));
-
- clk_put(chip->clk);
- kfree(chip);
return 0;
}
--
1.7.9.5
next prev parent reply other threads:[~2012-06-29 13:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-29 13:30 [PATCH 1/4] pwm: Convert pwm-imx to use devm_* APIs Axel Lin
2012-06-29 13:31 ` Axel Lin [this message]
2012-06-30 19:38 ` [PATCH 2/4] pwm: Convert pwm-pxa " Thierry Reding
2012-06-29 13:32 ` [PATCH 3/4] pwm: Convert pwm-samsung " Axel Lin
2012-07-02 20:57 ` Thierry Reding
2012-06-29 13:33 ` [PATCH 4/4] pwm: Convert pwm-vt8500 " Axel Lin
2012-06-30 19:45 ` Thierry Reding
2012-06-30 18:43 ` [PATCH 1/4] pwm: Convert pwm-imx " Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340976682.4752.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=eric.y.miao@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=thierry.reding@avionic-design.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox