From: Axel Lin <axel.lin@gmail.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>,
Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] regulator: tps62360: Convert to devm_gpio_request_one
Date: Sat, 07 Jul 2012 08:28:33 +0800 [thread overview]
Message-ID: <1341620913.3153.1.camel@phoenix> (raw)
Use devm_gpio_request_one to save a few error handling code.
Also remove trivial comment for tps62360_remove.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps62360-regulator.c | 38 +++++++-------------------------
1 file changed, 8 insertions(+), 30 deletions(-)
diff --git a/drivers/regulator/tps62360-regulator.c b/drivers/regulator/tps62360-regulator.c
index 103bb62..062a9cf 100644
--- a/drivers/regulator/tps62360-regulator.c
+++ b/drivers/regulator/tps62360-regulator.c
@@ -428,24 +428,24 @@ static int __devinit tps62360_probe(struct i2c_client *client,
int gpio_flags;
gpio_flags = (pdata->vsel0_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- ret = gpio_request_one(tps->vsel0_gpio,
- gpio_flags, "tps62360-vsel0");
+ ret = devm_gpio_request_one(&client->dev, tps->vsel0_gpio,
+ gpio_flags, "tps62360-vsel0");
if (ret) {
dev_err(&client->dev,
"%s(): Could not obtain vsel0 GPIO %d: %d\n",
__func__, tps->vsel0_gpio, ret);
- goto err_gpio0;
+ return ret;
}
gpio_flags = (pdata->vsel1_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
- ret = gpio_request_one(tps->vsel1_gpio,
- gpio_flags, "tps62360-vsel1");
+ ret = devm_gpio_request_one(&client->dev, tps->vsel1_gpio,
+ gpio_flags, "tps62360-vsel1");
if (ret) {
dev_err(&client->dev,
"%s(): Could not obtain vsel1 GPIO %d: %d\n",
__func__, tps->vsel1_gpio, ret);
- goto err_gpio1;
+ return ret;
}
tps->valid_gpios = true;
@@ -463,7 +463,7 @@ static int __devinit tps62360_probe(struct i2c_client *client,
if (ret < 0) {
dev_err(tps->dev, "%s(): Init failed with err = %d\n",
__func__, ret);
- goto err_init;
+ return ret;
}
config.dev = &client->dev;
@@ -477,39 +477,17 @@ static int __devinit tps62360_probe(struct i2c_client *client,
dev_err(tps->dev,
"%s(): regulator register failed with err %s\n",
__func__, id->name);
- ret = PTR_ERR(rdev);
- goto err_init;
+ return PTR_ERR(rdev);
}
tps->rdev = rdev;
return 0;
-
-err_init:
- if (gpio_is_valid(tps->vsel1_gpio))
- gpio_free(tps->vsel1_gpio);
-err_gpio1:
- if (gpio_is_valid(tps->vsel0_gpio))
- gpio_free(tps->vsel0_gpio);
-err_gpio0:
- return ret;
}
-/**
- * tps62360_remove - tps62360 driver i2c remove handler
- * @client: i2c driver client device structure
- *
- * Unregister TPS driver as an i2c client device driver
- */
static int __devexit tps62360_remove(struct i2c_client *client)
{
struct tps62360_chip *tps = i2c_get_clientdata(client);
- if (gpio_is_valid(tps->vsel1_gpio))
- gpio_free(tps->vsel1_gpio);
-
- if (gpio_is_valid(tps->vsel0_gpio))
- gpio_free(tps->vsel0_gpio);
-
regulator_unregister(tps->rdev);
return 0;
}
--
1.7.9.5
next reply other threads:[~2012-07-07 0:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-07 0:28 Axel Lin [this message]
2012-07-08 9:13 ` [PATCH] regulator: tps62360: Convert to devm_gpio_request_one Laxman Dewangan
2012-07-09 18:37 ` Mark Brown
2012-07-15 20:52 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341620913.3153.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=ldewangan@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox