From: Axel Lin <axel.lin@gmail.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Sangbeom Kim <sbkim73@samsung.com>, Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH] regulator: s2mps11: Use array to save pointer to rdev
Date: Fri, 13 Jul 2012 10:12:40 +0800 [thread overview]
Message-ID: <1342145560.19496.5.camel@phoenix> (raw)
The number of regulator is known at compile time, use array to save pointer to
rdev makes the code simpler.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/s2mps11.c | 27 ++++++++-------------------
1 file changed, 8 insertions(+), 19 deletions(-)
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4669dc9..926f9c8 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -24,7 +24,7 @@
#include <linux/mfd/samsung/s2mps11.h>
struct s2mps11_info {
- struct regulator_dev **rdev;
+ struct regulator_dev *rdev[S2MPS11_REGULATOR_MAX];
int ramp_delay2;
int ramp_delay34;
@@ -236,9 +236,8 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
struct regulator_config config = { };
- struct regulator_dev **rdev;
struct s2mps11_info *s2mps11;
- int i, ret, size;
+ int i, ret;
unsigned char ramp_enable, ramp_reg = 0;
if (!pdata) {
@@ -251,13 +250,6 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
if (!s2mps11)
return -ENOMEM;
- size = sizeof(struct regulator_dev *) * S2MPS11_REGULATOR_MAX;
- s2mps11->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
- if (!s2mps11->rdev) {
- return -ENOMEM;
- }
-
- rdev = s2mps11->rdev;
platform_set_drvdata(pdev, s2mps11);
s2mps11->ramp_delay2 = pdata->buck2_ramp_delay;
@@ -297,12 +289,12 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s2mps11;
- rdev[i] = regulator_register(®ulators[i], &config);
- if (IS_ERR(rdev[i])) {
- ret = PTR_ERR(rdev[i]);
+ s2mps11->rdev[i] = regulator_register(®ulators[i], &config);
+ if (IS_ERR(s2mps11->rdev[i])) {
+ ret = PTR_ERR(s2mps11->rdev[i]);
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
- rdev[i] = NULL;
+ s2mps11->rdev[i] = NULL;
goto err;
}
}
@@ -310,8 +302,7 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
return 0;
err:
for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
+ regulator_unregister(s2mps11->rdev[i]);
return ret;
}
@@ -319,12 +310,10 @@ err:
static int __devexit s2mps11_pmic_remove(struct platform_device *pdev)
{
struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev);
- struct regulator_dev **rdev = s2mps11->rdev;
int i;
for (i = 0; i < S2MPS11_REGULATOR_MAX; i++)
- if (rdev[i])
- regulator_unregister(rdev[i]);
+ regulator_unregister(s2mps11->rdev[i]);
return 0;
}
--
1.7.9.5
next reply other threads:[~2012-07-13 2:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-13 2:12 Axel Lin [this message]
2012-08-01 19:56 ` [PATCH] regulator: s2mps11: Use array to save pointer to rdev Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342145560.19496.5.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox