From: Axel Lin <axel.lin@gmail.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Rajendra Nayak <rnayak@ti.com>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT 1/2] regulator: twl: Fix checking voltage range in twl6030smps_set_voltage()
Date: Sat, 14 Jul 2012 13:37:13 +0800 [thread overview]
Message-ID: <1342244233.4207.1.camel@phoenix> (raw)
The voltage selection logic is supposed to find the samllest voltage falls
within specified range. When using equation to calculate vsel, we need to
ensure the requested min_uV meet the range of using the equation.
Otherwise we may select a voltage that is out of specified range.
For example, in the case vsel = 62 means select voltage of 2100000uV.
What we want is to ensure the requested min_uV <= 2100000 rather than checking
max_uV >= 2100000. And this also means in the case min_uV > 2100000, vsel = 62
does not meet the request.
Also calling twl6030smps_list_voltage() for all cases to ensure the selected
voltage still in bounds.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/twl-regulator.c | 36 ++++++++++++++++--------------------
1 file changed, 16 insertions(+), 20 deletions(-)
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index 8f0bd56..03d0bea 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -760,32 +760,28 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
unsigned int *selector)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
- int vsel = 0;
+ int vsel = 0, calc_uV;
switch (info->flags) {
case 0:
if (min_uV == 0)
vsel = 0;
else if ((min_uV >= 600000) && (min_uV <= 1300000)) {
- int calc_uV;
vsel = DIV_ROUND_UP(min_uV - 600000, 12500);
vsel++;
- calc_uV = twl6030smps_list_voltage(rdev, vsel);
- if (calc_uV > max_uV)
- return -EINVAL;
}
/* Values 1..57 for vsel are linear and can be calculated
* values 58..62 are non linear.
*/
- else if ((min_uV > 1900000) && (max_uV >= 2100000))
+ else if ((min_uV > 1900000) && (min_uV <= 2100000))
vsel = 62;
- else if ((min_uV > 1800000) && (max_uV >= 1900000))
+ else if ((min_uV > 1800000) && (min_uV <= 1900000))
vsel = 61;
- else if ((min_uV > 1500000) && (max_uV >= 1800000))
+ else if ((min_uV > 1500000) && (min_uV <= 1800000))
vsel = 60;
- else if ((min_uV > 1350000) && (max_uV >= 1500000))
+ else if ((min_uV > 1350000) && (min_uV <= 1500000))
vsel = 59;
- else if ((min_uV > 1300000) && (max_uV >= 1350000))
+ else if ((min_uV > 1300000) && (min_uV <= 1350000))
vsel = 58;
else
return -EINVAL;
@@ -794,25 +790,21 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
if (min_uV == 0)
vsel = 0;
else if ((min_uV >= 700000) && (min_uV <= 1420000)) {
- int calc_uV;
vsel = DIV_ROUND_UP(min_uV - 700000, 12500);
vsel++;
- calc_uV = twl6030smps_list_voltage(rdev, vsel);
- if (calc_uV > max_uV)
- return -EINVAL;
}
/* Values 1..57 for vsel are linear and can be calculated
* values 58..62 are non linear.
*/
- else if ((min_uV > 1900000) && (max_uV >= 2100000))
+ else if ((min_uV > 1900000) && (min_uV <= 2100000))
vsel = 62;
- else if ((min_uV > 1800000) && (max_uV >= 1900000))
+ else if ((min_uV > 1800000) && (min_uV <= 1900000))
vsel = 61;
- else if ((min_uV > 1350000) && (max_uV >= 1800000))
+ else if ((min_uV > 1350000) && (min_uV <= 1800000))
vsel = 60;
- else if ((min_uV > 1350000) && (max_uV >= 1500000))
+ else if ((min_uV > 1350000) && (min_uV <= 1500000))
vsel = 59;
- else if ((min_uV > 1300000) && (max_uV >= 1350000))
+ else if ((min_uV > 1300000) && (min_uV <= 1350000))
vsel = 58;
else
return -EINVAL;
@@ -828,13 +820,17 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
case SMPS_OFFSET_EN|SMPS_EXTENDED_EN:
if (min_uV == 0) {
vsel = 0;
- } else if ((min_uV >= 2161000) && (max_uV <= 4321000)) {
+ } else if ((min_uV >= 2161000) && (min_uV <= 4321000)) {
vsel = DIV_ROUND_UP(min_uV - 2161000, 38600);
vsel++;
}
break;
}
+ calc_uV = twl6030smps_list_voltage(rdev, vsel);
+ if (calc_uV > max_uV)
+ return -EINVAL;
+
*selector = vsel;
return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS,
--
1.7.9.5
next reply other threads:[~2012-07-14 5:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-14 5:37 Axel Lin [this message]
2012-07-14 5:41 ` [PATCH RFT 2/2] regulator: twl: Convert twlsmps_ops to get_voltage_sel and map_voltage Axel Lin
2012-07-16 9:25 ` Rajendra Nayak
2012-07-16 9:25 ` [PATCH RFT 1/2] regulator: twl: Fix checking voltage range in twl6030smps_set_voltage() Rajendra Nayak
2012-08-01 19:57 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342244233.4207.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox