From: Masanari Iida <standby24x7@gmail.com>
To: trivial@kernel.org, linux-kernel@vger.kernel.org, rdunlap@xenotime.net
Cc: Masanari Iida <standby24x7@gmail.com>
Subject: [PATCH/v2] Fix typo in various Kconfig
Date: Wed, 8 Aug 2012 02:15:29 +0900 [thread overview]
Message-ID: <1344359729-18887-1-git-send-email-standby24x7@gmail.com> (raw)
In-Reply-To: <1344347699-26434-1-git-send-email-standby24x7@gmail.com>
Correct spelling typo in various Kconfig files.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
---
arch/arm/mach-tegra/Kconfig | 2 +-
arch/blackfin/mach-bf609/Kconfig | 2 +-
arch/openrisc/Kconfig | 2 +-
crypto/Kconfig | 2 +-
drivers/media/video/Kconfig | 2 +-
drivers/thermal/Kconfig | 2 +-
drivers/tty/serial/8250/Kconfig | 2 +-
drivers/usb/host/Kconfig | 4 ++--
lib/Kconfig.debug | 10 +++++-----
9 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 9077aaa..453f259 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -56,7 +56,7 @@ config TEGRA_AHB
help
Adds AHB configuration functionality for NVIDIA Tegra SoCs,
which controls AHB bus master arbitration and some
- perfomance parameters(priority, prefech size).
+ performance parameters(priority, prefetch size).
comment "Tegra board type"
diff --git a/arch/blackfin/mach-bf609/Kconfig b/arch/blackfin/mach-bf609/Kconfig
index 101b33e..95a4f1b 100644
--- a/arch/blackfin/mach-bf609/Kconfig
+++ b/arch/blackfin/mach-bf609/Kconfig
@@ -56,7 +56,7 @@ config SEC_IRQ_PRIORITY_LEVELS
default 7
range 0 7
help
- Devide the total number of interrupt priority levels into sub-levels.
+ Divide the total number of interrupt priority levels into sub-levels.
There is 2 ^ (SEC_IRQ_PRIORITY_LEVELS + 1) different levels.
endmenu
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 05f2ba4..0ac66f6 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -144,7 +144,7 @@ config DEBUG_STACKOVERFLOW
help
Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
- but will catch most of kernel stack overruns and exit gracefuly.
+ but will catch most of kernel stack overruns and exit gracefully.
Say Y if you are unsure.
diff --git a/crypto/Kconfig b/crypto/Kconfig
index cbcc0e2..f8b54bb 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -840,7 +840,7 @@ config CRYPTO_SERPENT_SSE2_X86_64
Keys are allowed to be from 0 to 256 bits in length, in steps
of 8 bits.
- This module provides Serpent cipher algorithm that processes eigth
+ This module provides Serpent cipher algorithm that processes eight
blocks parallel using SSE2 instruction set.
See also:
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index c128fac..ce3972a 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -625,7 +625,7 @@ config VIDEO_UPD64083
To compile this driver as a module, choose M here: the
module will be called upd64083.
-comment "Miscelaneous helper chips"
+comment "Miscellaneous helper chips"
config VIDEO_THS7303
tristate "THS7303 Video Amplifier"
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 48c50be..decd7a0 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -51,7 +51,7 @@ config EXYNOS_THERMAL
tristate "Temperature sensor on Samsung EXYNOS"
depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5) && THERMAL
help
- If you say yes here you get support for TMU (Thermal Managment
+ If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS series of SoC.
This driver can also be built as a module. If so, the module
will be called exynos4-tmu
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a27dd05..9395800 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -271,7 +271,7 @@ config SERIAL_8250_DW
present in the Synopsys DesignWare APB UART.
config SERIAL_8250_EM
- tristate "Support for Emma Mobile intergrated serial port"
+ tristate "Support for Emma Mobile integrated serial port"
depends on SERIAL_8250 && ARM && HAVE_CLK
help
Selecting this option will add support for the integrated serial
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 075d2ec..7cac2e8 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -418,7 +418,7 @@ config USB_OHCI_HCD_PLATFORM
default n
---help---
Adds an OHCI host driver for a generic platform device, which
- provieds a memory space and an irq.
+ provides a memory space and an irq.
If unsure, say N.
@@ -428,7 +428,7 @@ config USB_EHCI_HCD_PLATFORM
default n
---help---
Adds an EHCI host driver for a generic platform device, which
- provieds a memory space and an irq.
+ provides a memory space and an irq.
If unsure, say N.
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 290408e..42ba688 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1089,7 +1089,7 @@ config NOTIFIER_ERROR_INJECTION
depends on DEBUG_KERNEL
select DEBUG_FS
help
- This option provides the ability to inject artifical errors to
+ This option provides the ability to inject artificial errors to
specified notifier chain callbacks. It is useful to test the error
handling of notifier call chain failures.
@@ -1100,7 +1100,7 @@ config CPU_NOTIFIER_ERROR_INJECT
depends on HOTPLUG_CPU && NOTIFIER_ERROR_INJECTION
help
This option provides a kernel module that can be used to test
- the error handling of the cpu notifiers by injecting artifical
+ the error handling of the cpu notifiers by injecting artificial
errors to CPU notifier chain callbacks. It is controlled through
debugfs interface under /sys/kernel/debug/notifier-error-inject/cpu
@@ -1124,7 +1124,7 @@ config PM_NOTIFIER_ERROR_INJECT
depends on PM && NOTIFIER_ERROR_INJECTION
default m if PM_DEBUG
help
- This option provides the ability to inject artifical errors to
+ This option provides the ability to inject artificial errors to
PM notifier chain callbacks. It is controlled through debugfs
interface /sys/kernel/debug/notifier-error-inject/pm
@@ -1147,7 +1147,7 @@ config MEMORY_NOTIFIER_ERROR_INJECT
tristate "Memory hotplug notifier error injection module"
depends on MEMORY_HOTPLUG_SPARSE && NOTIFIER_ERROR_INJECTION
help
- This option provides the ability to inject artifical errors to
+ This option provides the ability to inject artificial errors to
memory hotplug notifier chain callbacks. It is controlled through
debugfs interface under /sys/kernel/debug/notifier-error-inject/memory
@@ -1170,7 +1170,7 @@ config PSERIES_RECONFIG_NOTIFIER_ERROR_INJECT
tristate "pSeries reconfig notifier error injection module"
depends on PPC_PSERIES && NOTIFIER_ERROR_INJECTION
help
- This option provides the ability to inject artifical errors to
+ This option provides the ability to inject artificial errors to
pSeries reconfig notifier chain callbacks. It is controlled
through debugfs interface under
/sys/kernel/debug/notifier-error-inject/pSeries-reconfig/
--
1.7.12.rc1.17.g9a7365c
next prev parent reply other threads:[~2012-08-07 17:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 13:54 [PATCH] [trivial] Fix typo in various Kconfig Masanari Iida
2012-08-07 16:46 ` Randy Dunlap
2012-08-07 17:17 ` Masanari Iida
2012-08-07 17:15 ` Masanari Iida [this message]
2012-08-07 17:34 ` [PATCH/v2] " Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344359729-18887-1-git-send-email-standby24x7@gmail.com \
--to=standby24x7@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@xenotime.net \
--cc=trivial@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox