From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754843Ab2HHBIJ (ORCPT ); Tue, 7 Aug 2012 21:08:09 -0400 Received: from mga02.intel.com ([134.134.136.20]:40862 "EHLO mga02.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754677Ab2HHBHy (ORCPT ); Tue, 7 Aug 2012 21:07:54 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.67,351,1309762800"; d="scan'208";a="182925521" From: Huang Ying To: Bjorn Helgaas Cc: linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-pm@vger.kernel.org, "Rafael J. Wysocki" , Huang Ying , Alan Stern Subject: [PATCH -v3 4/4] PCI/PM: Add ABI document for sysfs file d3cold_allowed Date: Wed, 8 Aug 2012 09:07:41 +0800 Message-Id: <1344388061-18981-5-git-send-email-ying.huang@intel.com> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1344388061-18981-1-git-send-email-ying.huang@intel.com> References: <1344388061-18981-1-git-send-email-ying.huang@intel.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch adds ABI document for the following sysfs file: /sys/bus/pci/devices/.../d3cold_allowed Signed-off-by: Huang Ying Acked-by: Rafael J. Wysocki --- Documentation/ABI/testing/sysfs-bus-pci | 12 ++++++++++++ 1 file changed, 12 insertions(+) --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit.