From: Namjae Jeon <linkinjeon@gmail.com>
To: fengguang.wu@intel.com, akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org, Namjae Jeon <linkinjeon@gmail.com>,
Vivek Trivedi <vtrivedi018@gmail.com>
Subject: [PATCH] writeback: backing-dev: replace simple_strtoul to kstrto*
Date: Sat, 25 Aug 2012 04:24:32 -0400 [thread overview]
Message-ID: <1345883072-6364-1-git-send-email-linkinjeon@gmail.com> (raw)
fix checkpatch warnings:
WARNING: consider using kstrto* in preference to simple_strtoul
for below sys entry parsers:
/sys/block/<block device>/bdi/read_ahead_kb
/sys/block/<block device>/bdi/max_ratio
/sys/block/<block device>/bdi/min_ratio
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Vivek Trivedi <vtrivedi018@gmail.com>
---
mm/backing-dev.c | 50 ++++++++++++++++++++++++++------------------------
1 file changed, 26 insertions(+), 24 deletions(-)
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index b41823c..d3ca2b3 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -158,16 +158,16 @@ static ssize_t read_ahead_kb_store(struct device *dev,
const char *buf, size_t count)
{
struct backing_dev_info *bdi = dev_get_drvdata(dev);
- char *end;
unsigned long read_ahead_kb;
- ssize_t ret = -EINVAL;
+ ssize_t ret;
- read_ahead_kb = simple_strtoul(buf, &end, 10);
- if (*buf && (end[0] == '\0' || (end[0] == '\n' && end[1] == '\0'))) {
- bdi->ra_pages = read_ahead_kb >> (PAGE_SHIFT - 10);
- ret = count;
- }
- return ret;
+ ret = kstrtoul(buf, 10, &read_ahead_kb);
+ if (ret < 0)
+ return ret;
+
+ bdi->ra_pages = read_ahead_kb >> (PAGE_SHIFT - 10);
+
+ return count;
}
#define K(pages) ((pages) << (PAGE_SHIFT - 10))
@@ -187,16 +187,17 @@ static ssize_t min_ratio_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct backing_dev_info *bdi = dev_get_drvdata(dev);
- char *end;
unsigned int ratio;
- ssize_t ret = -EINVAL;
+ ssize_t ret;
+
+ ret = kstrtouint(buf, 10, &ratio);
+ if (ret < 0)
+ return ret;
+
+ ret = bdi_set_min_ratio(bdi, ratio);
+ if (!ret)
+ ret = count;
- ratio = simple_strtoul(buf, &end, 10);
- if (*buf && (end[0] == '\0' || (end[0] == '\n' && end[1] == '\0'))) {
- ret = bdi_set_min_ratio(bdi, ratio);
- if (!ret)
- ret = count;
- }
return ret;
}
BDI_SHOW(min_ratio, bdi->min_ratio)
@@ -205,16 +206,17 @@ static ssize_t max_ratio_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct backing_dev_info *bdi = dev_get_drvdata(dev);
- char *end;
unsigned int ratio;
- ssize_t ret = -EINVAL;
+ ssize_t ret;
+
+ ret = kstrtouint(buf, 10, &ratio);
+ if (ret < 0)
+ return ret;
+
+ ret = bdi_set_max_ratio(bdi, ratio);
+ if (!ret)
+ ret = count;
- ratio = simple_strtoul(buf, &end, 10);
- if (*buf && (end[0] == '\0' || (end[0] == '\n' && end[1] == '\0'))) {
- ret = bdi_set_max_ratio(bdi, ratio);
- if (!ret)
- ret = count;
- }
return ret;
}
BDI_SHOW(max_ratio, bdi->max_ratio)
--
1.7.9.5
next reply other threads:[~2012-08-25 8:25 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-25 8:24 Namjae Jeon [this message]
2012-08-25 9:02 ` [PATCH] writeback: backing-dev: replace simple_strtoul to kstrto* Fengguang Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345883072-6364-1-git-send-email-linkinjeon@gmail.com \
--to=linkinjeon@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=fengguang.wu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=vtrivedi018@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox