[PATCH 05/32 v4] MIPS: Netlogic: use ehci-platform driver

[Florian Fainelli <florian@openwrt.org>]

The EHCI platform driver is suitable for use by the Netlogic XLR platform
since there is nothing specific that the EHCI XLR platform driver does.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
---
Changes in v4:
- rebased against greg's latest usb-next
No changes in v3

Changes in v2:
- really change driver name to "ehci-platform"
- slightly reworded commit message

 arch/mips/netlogic/xlr/platform.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 71b44d8..144c5c6 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -15,6 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/i2c.h>
+#include <linux/usb/ehci_pdriver.h>
 
 #include <asm/netlogic/haldefs.h>
 #include <asm/netlogic/xlr/iomap.h>
@@ -123,8 +124,12 @@ static u64 xls_usb_dmamask = ~(u32)0;
 		},							\
 	}
 
+static struct usb_ehci_pdata xls_usb_ehci_pdata = {
+	.caps_offset	= 0,
+};
+
 static struct platform_device xls_usb_ehci_device =
-			 USB_PLATFORM_DEV("ehci-xls", 0, PIC_USB_IRQ);
+			 USB_PLATFORM_DEV("ehci-platform", 0, PIC_USB_IRQ);
 static struct platform_device xls_usb_ohci_device_0 =
 			 USB_PLATFORM_DEV("ohci-xls-0", 1, PIC_USB_IRQ);
 static struct platform_device xls_usb_ohci_device_1 =
@@ -172,6 +177,7 @@ int xls_platform_usb_init(void)
 	memres = CPHYSADDR((unsigned long)usb_mmio);
 	xls_usb_ehci_device.resource[0].start = memres;
 	xls_usb_ehci_device.resource[0].end = memres + 0x400 - 1;
+	xls_usb_ehci_device.dev.platform_data = &xls_usb_ehci_pdata;
 
 	memres += 0x400;
 	xls_usb_ohci_device_0.resource[0].start = memres;
-- 
1.7.9.5