From: Joerg Roedel <joro@8bytes.org>
To: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org, iommu@lists.linux-foundation.org,
linux-kernel@vger.kernel.org,
Suresh Siddha <suresh.b.siddha@intel.com>,
Yinghai Lu <yinghai@kernel.org>,
Sebastian Andrzej Siewior <sebastian@breakpoint.cc>,
Joerg Roedel <joro@8bytes.org>
Subject: [PATCH 13/19] x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
Date: Tue, 20 Nov 2012 14:12:50 +0100 [thread overview]
Message-ID: <1353417176-18945-14-git-send-email-joro@8bytes.org> (raw)
In-Reply-To: <1353417176-18945-1-git-send-email-joro@8bytes.org>
Move all the code to either to the header file
asm/irq_remapping.h or to drivers/iommu/.
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
---
arch/x86/include/asm/hw_irq.h | 1 +
arch/x86/include/asm/io_apic.h | 5 ++++
arch/x86/include/asm/irq_remapping.h | 17 +++++++++++++
arch/x86/kernel/apic/io_apic.c | 44 +---------------------------------
drivers/iommu/intel_irq_remapping.c | 4 ++++
drivers/iommu/irq_remapping.c | 25 +++++++++++++++++++
6 files changed, 53 insertions(+), 43 deletions(-)
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index fc89a2a..10a78c3 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -127,6 +127,7 @@ struct irq_cfg {
u8 vector;
u8 move_in_progress : 1;
#ifdef CONFIG_IRQ_REMAP
+ u8 remapped : 1;
union {
struct irq_2_iommu irq_2_iommu;
struct irq_2_irte irq_2_irte;
diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h
index 71f5f08..36fb5ab 100644
--- a/arch/x86/include/asm/io_apic.h
+++ b/arch/x86/include/asm/io_apic.h
@@ -144,6 +144,7 @@ extern int timer_through_8259;
(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
struct io_apic_irq_attr;
+struct irq_cfg;
extern int io_apic_set_pci_routing(struct device *dev, int irq,
struct io_apic_irq_attr *irq_attr);
void setup_IO_APIC_irq_extra(u32 gsi);
@@ -152,6 +153,10 @@ extern void ioapic_insert_resources(void);
extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
unsigned int, int,
struct io_apic_irq_attr *);
+extern int native_setup_ioapic_entry(int, struct IO_APIC_route_entry *,
+ unsigned int, int,
+ struct io_apic_irq_attr *);
+extern void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg);
int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
diff --git a/arch/x86/include/asm/irq_remapping.h b/arch/x86/include/asm/irq_remapping.h
index 6f4b48b..562db68 100644
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -45,6 +45,13 @@ extern void compose_remapped_msi_msg(struct pci_dev *pdev,
extern int setup_hpet_msi_remapped(unsigned int irq, unsigned int id);
extern void panic_if_irq_remap(const char *msg);
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+ return (cfg->remapped == 1);
+}
+
+void irq_remap_modify_chip_defaults(struct irq_chip *chip);
+
#else /* CONFIG_IRQ_REMAP */
static inline void setup_irq_remapping_ops(void) { }
@@ -76,6 +83,16 @@ static inline int setup_hpet_msi_remapped(unsigned int irq, unsigned int id)
static inline void panic_if_irq_remap(const char *msg)
{
}
+
+static inline bool irq_remapped(struct irq_cfg *cfg)
+{
+ return false;
+}
+
+static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+}
+
#endif /* CONFIG_IRQ_REMAP */
#endif /* __X86_IRQ_REMAPPING_H */
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 5883de0..eb3fa21 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -68,22 +68,6 @@
#define for_each_irq_pin(entry, head) \
for (entry = head; entry; entry = entry->next)
-#ifdef CONFIG_IRQ_REMAP
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip);
-static inline bool irq_remapped(struct irq_cfg *cfg)
-{
- return cfg->irq_2_iommu.iommu != NULL;
-}
-#else
-static inline bool irq_remapped(struct irq_cfg *cfg)
-{
- return false;
-}
-static inline void irq_remap_modify_chip_defaults(struct irq_chip *chip)
-{
-}
-#endif
-
/*
* Is the SiS APIC rmw bug present ?
* -1 = don't know, 0 = no, 1 = yes
@@ -606,7 +590,7 @@ static void __eoi_ioapic_pin(int apic, int pin, int vector, struct irq_cfg *cfg)
}
}
-static void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
{
struct irq_pin_list *entry;
unsigned long flags;
@@ -2554,32 +2538,6 @@ static void ack_apic_level(struct irq_data *data)
ioapic_irqd_unmask(data, cfg, masked);
}
-#ifdef CONFIG_IRQ_REMAP
-static void ir_ack_apic_edge(struct irq_data *data)
-{
- ack_APIC_irq();
-}
-
-static void ir_ack_apic_level(struct irq_data *data)
-{
- ack_APIC_irq();
- eoi_ioapic_irq(data->irq, data->chip_data);
-}
-
-static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
-{
- seq_printf(p, " IR-%s", data->chip->name);
-}
-
-static void irq_remap_modify_chip_defaults(struct irq_chip *chip)
-{
- chip->irq_print_chip = ir_print_prefix;
- chip->irq_ack = ir_ack_apic_edge;
- chip->irq_eoi = ir_ack_apic_level;
- chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
-}
-#endif /* CONFIG_IRQ_REMAP */
-
static struct irq_chip ioapic_chip __read_mostly = {
.name = "IO-APIC",
.irq_startup = startup_ioapic_irq,
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index cb9a72d..7ca4947 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -68,6 +68,7 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
{
struct ir_table *table = iommu->ir_table;
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
u16 index, start_index;
unsigned int mask = 0;
unsigned long flags;
@@ -115,6 +116,7 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
for (i = index; i < index + count; i++)
table->base[i].present = 1;
+ cfg->remapped = 1;
irq_iommu->iommu = iommu;
irq_iommu->irte_index = index;
irq_iommu->sub_handle = 0;
@@ -155,6 +157,7 @@ static int map_irq_to_irte_handle(int irq, u16 *sub_handle)
static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subhandle)
{
struct irq_2_iommu *irq_iommu = irq_2_iommu(irq);
+ struct irq_cfg *cfg = irq_get_chip_data(irq);
unsigned long flags;
if (!irq_iommu)
@@ -162,6 +165,7 @@ static int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index, u16 subha
raw_spin_lock_irqsave(&irq_2_ir_lock, flags);
+ cfg->remapped = 1;
irq_iommu->iommu = iommu;
irq_iommu->irte_index = index;
irq_iommu->sub_handle = subhandle;
diff --git a/drivers/iommu/irq_remapping.c b/drivers/iommu/irq_remapping.c
index 3514604..97b5023 100644
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -1,3 +1,4 @@
+#include <linux/seq_file.h>
#include <linux/cpumask.h>
#include <linux/kernel.h>
#include <linux/string.h>
@@ -272,3 +273,27 @@ void panic_if_irq_remap(const char *msg)
if (irq_remapping_enabled)
panic(msg);
}
+
+static void ir_ack_apic_edge(struct irq_data *data)
+{
+ ack_APIC_irq();
+}
+
+static void ir_ack_apic_level(struct irq_data *data)
+{
+ ack_APIC_irq();
+ eoi_ioapic_irq(data->irq, data->chip_data);
+}
+
+static void ir_print_prefix(struct irq_data *data, struct seq_file *p)
+{
+ seq_printf(p, " IR-%s", data->chip->name);
+}
+
+void irq_remap_modify_chip_defaults(struct irq_chip *chip)
+{
+ chip->irq_print_chip = ir_print_prefix;
+ chip->irq_ack = ir_ack_apic_edge;
+ chip->irq_eoi = ir_ack_apic_level;
+ chip->irq_set_affinity = x86_io_apic_ops.set_affinity;
+}
--
1.7.9.5
next prev parent reply other threads:[~2012-11-20 13:15 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-20 13:12 [PATCH 00/19 v4] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-11-20 13:12 ` [PATCH 01/19] x86, apic: Move irq_remapping_enabled checks into IRQ-remapping code Joerg Roedel
2012-11-20 13:12 ` [PATCH 02/19] x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume Joerg Roedel
2012-11-20 13:12 ` [PATCH 03/19] x86, io_apic: Introduce x86_io_apic_ops.disable() Joerg Roedel
2012-11-20 13:12 ` [PATCH 04/19] x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging Joerg Roedel
2012-11-20 13:12 ` [PATCH 05/19] x86, hpet: Introduce x86_msi_ops.setup_hpet_msi Joerg Roedel
2012-11-20 13:12 ` [PATCH 06/19] x86, msi: Use IRQ remapping specific setup_msi_irqs routine Joerg Roedel
2012-11-20 13:12 ` [PATCH 07/19] x86, io_apic: Introduce set_affinity function pointer Joerg Roedel
2012-11-20 13:12 ` [PATCH 08/19] x86, io_apic: Convert setup_ioapic_entry to " Joerg Roedel
2012-11-20 13:12 ` [PATCH 09/19] x86, io_apic: Move irq_remapping_enabled checks out of check_timer() Joerg Roedel
2012-11-20 13:12 ` [PATCH 10/19] x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin Joerg Roedel
2012-11-20 13:12 ` [PATCH 11/19] x86, irq: Move irq_remapping_enabled declaration to iommu code Joerg Roedel
2012-11-20 13:12 ` [PATCH 12/19] x86, irq: Add data structure to keep AMD specific irq remapping information Joerg Roedel
2012-11-20 13:12 ` Joerg Roedel [this message]
2012-11-20 13:12 ` [PATCH 14/19] x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() Joerg Roedel
2012-11-20 13:12 ` [PATCH 15/19] x86, irq: Move irq_remapped() check into free_remapped_irq Joerg Roedel
2012-11-20 13:12 ` [PATCH 16/19] x86, irq: Introduce setup_remapped_irq() Joerg Roedel
2012-11-20 13:12 ` [PATCH 17/19] x86, msi: Introduce x86_msi.compose_msi_msg call-back Joerg Roedel
2012-11-20 13:12 ` [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back Joerg Roedel
2012-11-20 13:12 ` [PATCH 19/19] x86, irq: Move irq_remapped out of x86 core code Joerg Roedel
2012-11-28 21:09 ` [PATCH 00/19 v4] Improve IRQ remapping abstraction in " Konrad Rzeszutek Wilk
2012-11-28 21:22 ` Konrad Rzeszutek Wilk
2012-11-29 0:19 ` Joerg Roedel
-- strict thread matches above, loose matches on Subject: below --
2012-09-26 10:44 [PATCH 00/19 v3] " Joerg Roedel
2012-09-26 10:44 ` [PATCH 13/19] x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core Joerg Roedel
2012-08-20 13:55 [PATCH 00/19 v2] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-08-20 13:55 ` [PATCH 13/19] x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core Joerg Roedel
2012-08-26 18:23 ` Sebastian Andrzej Siewior
2012-08-07 15:43 [PATCH 0/19] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-08-07 15:43 ` [PATCH 13/19] x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1353417176-18945-14-git-send-email-joro@8bytes.org \
--to=joro@8bytes.org \
--cc=hpa@zytor.com \
--cc=iommu@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=sebastian@breakpoint.cc \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).