From: Sebastian Hahn <snsehahn@cip.cs.fau.de>
To: gregkh@linuxfoundation.org
Cc: Jennifer.Naumann@informatik.stud.uni-erlangen.de,
dan.carpenter@oracle.com, standby24x7@gmail.com,
Julia.Lawall@lip6.fr, jkosina@suse.cz, joe@perches.com,
yongjun_wei@trendmicro.com.cn, adam.buchbinder@gmail.com,
amwang@redhat.com, justinmattock@gmail.com, wfp5p@virginia.edu,
jim.cromie@gmail.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
linux-kernel@i4.informatik.uni-erlangen.de,
Sebastian Hahn <snsehahn@cip.cs.fau.de>
Subject: [PATCH 6/6] staging/rtl8192u: do not init statics to 0
Date: Wed, 5 Dec 2012 21:40:23 +0100 [thread overview]
Message-ID: <1354740023-30849-7-git-send-email-snsehahn@cip.cs.fau.de> (raw)
In-Reply-To: <1354740023-30849-1-git-send-email-snsehahn@cip.cs.fau.de>
Fix the checkpatch error "do not initialize statics to 0 or NULL"
Signed-off-by: Sebastian Hahn <snsehahn@cip.cs.fau.de>
---
.../staging/rtl8192u/ieee80211/ieee80211_softmac.c | 2 +-
.../rtl8192u/ieee80211/ieee80211_softmac_wx.c | 2 +-
drivers/staging/rtl8192u/r8192U_core.c | 14 +++----
drivers/staging/rtl8192u/r8192U_dm.c | 40 ++++++++++----------
4 files changed, 29 insertions(+), 29 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 7062f9d..454f889 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -498,7 +498,7 @@ void ieee80211_softmac_scan_wq(struct work_struct *work)
{
struct delayed_work *dwork = container_of(work, struct delayed_work, work);
struct ieee80211_device *ieee = container_of(dwork, struct ieee80211_device, softmac_scan_wq);
- static short watchdog = 0;
+ static short watchdog;
u8 channel_map[MAX_CHANNEL_NUMBER+1];
memcpy(channel_map, GET_DOT11D_INFO(ieee)->channel_map, MAX_CHANNEL_NUMBER+1);
if(!ieee->ieee_up)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
index 421da8a..45422db 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
@@ -302,7 +302,7 @@ void ieee80211_wx_sync_scan_wq(struct work_struct *work)
HT_EXTCHNL_OFFSET chan_offset=0;
HT_CHANNEL_WIDTH bandwidth=0;
int b40M = 0;
- static int count = 0;
+ static int count;
chan = ieee->current_network.channel;
netif_carrier_off(ieee->dev);
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index f59bd92..01f82d3 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -3613,7 +3613,7 @@ HalRxCheckStuck819xUsb(struct net_device *dev)
u16 RegRxCounter = read_nic_word(dev, 0x130);
struct r8192_priv *priv = ieee80211_priv(dev);
bool bStuck = FALSE;
- static u8 rx_chk_cnt = 0;
+ static u8 rx_chk_cnt;
RT_TRACE(COMP_RESET,"%s(): RegRxCounter is %d,RxCounter is %d\n",__FUNCTION__,RegRxCounter,priv->RxCounter);
// If rssi is small, we should check rx for long time because of bad rx.
// or maybe it will continuous silent reset every 2 seconds.
@@ -4071,7 +4071,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work)
struct net_device *dev = priv->ieee80211->dev;
struct ieee80211_device* ieee = priv->ieee80211;
RESET_TYPE ResetType = RESET_TYPE_NORESET;
- static u8 check_reset_cnt=0;
+ static u8 check_reset_cnt;
bool bBusyTraffic = false;
if(!priv->up)
@@ -4554,12 +4554,12 @@ void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee802
u8 rfpath;
u32 nspatial_stream, tmp_val;
//u8 i;
- static u32 slide_rssi_index=0, slide_rssi_statistics=0;
- static u32 slide_evm_index=0, slide_evm_statistics=0;
- static u32 last_rssi=0, last_evm=0;
+ static u32 slide_rssi_index, slide_rssi_statistics;
+ static u32 slide_evm_index, slide_evm_statistics;
+ static u32 last_rssi, last_evm;
- static u32 slide_beacon_adc_pwdb_index=0, slide_beacon_adc_pwdb_statistics=0;
- static u32 last_beacon_adc_pwdb=0;
+ static u32 slide_beacon_adc_pwdb_index, slide_beacon_adc_pwdb_statistics;
+ static u32 last_beacon_adc_pwdb;
struct ieee80211_hdr_3addr *hdr;
u16 sc ;
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 7e2918f..ea46717 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -201,8 +201,8 @@ extern void deinit_hal_dm(struct net_device *dev)
void dm_CheckRxAggregation(struct net_device *dev) {
struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- static unsigned long lastTxOkCnt = 0;
- static unsigned long lastRxOkCnt = 0;
+ static unsigned long lastTxOkCnt;
+ static unsigned long lastRxOkCnt;
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
@@ -359,7 +359,7 @@ static void dm_check_rate_adaptive(struct net_device * dev)
u32 currentRATR, targetRATR = 0;
u32 LowRSSIThreshForRA = 0, HighRSSIThreshForRA = 0;
bool bshort_gi_enabled = false;
- static u8 ping_rssi_state=0;
+ static u8 ping_rssi_state;
if(!priv->up)
@@ -1486,7 +1486,7 @@ void dm_initialize_txpower_tracking(struct net_device *dev)
static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u32 tx_power_track_counter = 0;
+ static u32 tx_power_track_counter;
if(!priv->btxpower_tracking)
return;
@@ -1505,7 +1505,7 @@ static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev)
static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u8 TM_Trigger=0;
+ static u8 TM_Trigger;
//DbgPrint("dm_CheckTXPowerTracking() \n");
if(!priv->btxpower_tracking)
return;
@@ -2091,7 +2091,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 i;
- static u8 fw_dig=0;
+ static u8 fw_dig;
if (dm_digtable.dig_enable_flag == false)
return;
@@ -2131,7 +2131,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(
struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u32 reset_cnt = 0;
+ static u32 reset_cnt;
u8 i;
if (dm_digtable.dig_enable_flag == false)
@@ -2319,7 +2319,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
struct net_device * dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u32 reset_cnt_highpwr = 0;
+ static u32 reset_cnt_highpwr;
// For smooth, we can not change high power DIG state in the range.
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
@@ -2395,8 +2395,8 @@ static void dm_initial_gain(
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 initial_gain=0;
- static u8 initialized=0, force_write=0;
- static u32 reset_cnt=0;
+ static u8 initialized, force_write;
+ static u32 reset_cnt;
if(dm_digtable.dig_algorithm_switch)
{
@@ -2462,8 +2462,8 @@ static void dm_pd_th(
struct net_device * dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u8 initialized=0, force_write=0;
- static u32 reset_cnt = 0;
+ static u8 initialized, force_write;
+ static u32 reset_cnt;
if(dm_digtable.dig_algorithm_switch)
{
@@ -2574,8 +2574,8 @@ static void dm_cs_ratio(
struct net_device * dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
- static u8 initialized=0,force_write=0;
- static u32 reset_cnt = 0;
+ static u8 initialized,force_write;
+ static u32 reset_cnt;
if(dm_digtable.dig_algorithm_switch)
{
@@ -2651,8 +2651,8 @@ static void dm_check_edca_turbo(
//PSTA_QOS pStaQos = pMgntInfo->pStaQos;
// Keep past Tx/Rx packet count for RT-to-RT EDCA turbo.
- static unsigned long lastTxOkCnt = 0;
- static unsigned long lastRxOkCnt = 0;
+ static unsigned long lastTxOkCnt;
+ static unsigned long lastRxOkCnt;
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
@@ -2785,8 +2785,8 @@ static void dm_ctstoself(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev);
PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo;
- static unsigned long lastTxOkCnt = 0;
- static unsigned long lastRxOkCnt = 0;
+ static unsigned long lastTxOkCnt;
+ static unsigned long lastRxOkCnt;
unsigned long curTxOkCnt = 0;
unsigned long curRxOkCnt = 0;
@@ -3044,7 +3044,7 @@ static void dm_rxpath_sel_byrssi(struct net_device * dev)
u8 cck_rx_ver2_max_index=0, cck_rx_ver2_min_index=0, cck_rx_ver2_sec_index=0;
u8 cur_rf_rssi;
long cur_cck_pwdb;
- static u8 disabled_rf_cnt=0, cck_Rx_Path_initialized=0;
+ static u8 disabled_rf_cnt, cck_Rx_Path_initialized;
u8 update_cck_rx_path;
if(priv->rf_type != RF_2T4R)
@@ -3571,7 +3571,7 @@ void dm_check_fsync(struct net_device *dev)
struct r8192_priv *priv = ieee80211_priv(dev);
//u32 framesyncC34;
static u8 reg_c38_State=RegC38_Default;
- static u32 reset_cnt=0;
+ static u32 reset_cnt;
RT_TRACE(COMP_HALDM, "RSSI %d TimeInterval %d MultipleTimeInterval %d\n", priv->ieee80211->fsync_rssi_threshold, priv->ieee80211->fsync_time_interval, priv->ieee80211->fsync_multiple_timeinterval);
RT_TRACE(COMP_HALDM, "RateBitmap 0x%x FirstDiffRateThreshold %d SecondDiffRateThreshold %d\n", priv->ieee80211->fsync_rate_bitmap, priv->ieee80211->fsync_firstdiff_ratethreshold, priv->ieee80211->fsync_seconddiff_ratethreshold);
--
1.7.10.4
next prev parent reply other threads:[~2012-12-05 20:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-05 20:40 [PATCH 0/6] staging:rtl8192u: begin cleanup of some checkpatch errors Sebastian Hahn
2012-12-05 20:40 ` [PATCH 1/6] staging/rtl8192u: cleanfile run Sebastian Hahn
2012-12-05 20:40 ` [PATCH 2/6] staging/rtl8192u: put { on same line as struct Sebastian Hahn
2012-12-05 20:40 ` [PATCH 3/6] staging/rtl8192u: indent with tabs, not spaces Sebastian Hahn
2012-12-06 7:01 ` Dan Carpenter
2012-12-06 11:23 ` [PATCH 3/6 v2] " Sebastian Hahn
2012-12-06 12:55 ` devendra.aaru
2012-12-05 20:40 ` [PATCH 4/6] staging/rtl8192u: don't init globals to 0 or NULL Sebastian Hahn
2012-12-05 20:40 ` [PATCH 5/6] staging/rtl8192u: use same indent for switch and case Sebastian Hahn
2012-12-05 20:40 ` Sebastian Hahn [this message]
2012-12-14 17:00 ` [PATCH 0/6] staging:rtl8192u: begin cleanup of some checkpatch errors Jennifer Naumann
2012-12-14 16:58 ` Dan Carpenter
2012-12-14 23:31 ` Jennifer Naumann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1354740023-30849-7-git-send-email-snsehahn@cip.cs.fau.de \
--to=snsehahn@cip.cs.fau.de \
--cc=Jennifer.Naumann@informatik.stud.uni-erlangen.de \
--cc=Julia.Lawall@lip6.fr \
--cc=adam.buchbinder@gmail.com \
--cc=amwang@redhat.com \
--cc=dan.carpenter@oracle.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=jim.cromie@gmail.com \
--cc=jkosina@suse.cz \
--cc=joe@perches.com \
--cc=justinmattock@gmail.com \
--cc=linux-kernel@i4.informatik.uni-erlangen.de \
--cc=linux-kernel@vger.kernel.org \
--cc=standby24x7@gmail.com \
--cc=wfp5p@virginia.edu \
--cc=yongjun_wei@trendmicro.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).