From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Dan Murphy <dmurphy@ti.com>, pavel@ucw.cz
Cc: linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition
Date: Sat, 21 Sep 2019 20:08:09 +0200 [thread overview]
Message-ID: <135685e7-e3cc-da4d-3349-9affba5b89cc@gmail.com> (raw)
In-Reply-To: <20190920174139.30079-7-dmurphy@ti.com>
Dan,
One more remark below.
On 9/20/19 7:41 PM, Dan Murphy wrote:
> Introduce a multicolor class that groups colored LEDs
> within a LED node.
>
> The framework allows for dynamically setting individual LEDs
> or setting brightness levels of LEDs and updating them virtually
> simultaneously.
>
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/led-class-multicolor.c | 316 +++++++++++++++++++++++++++
> include/linux/led-class-multicolor.h | 76 +++++++
> 4 files changed, 403 insertions(+)
> create mode 100644 drivers/leds/led-class-multicolor.c
> create mode 100644 include/linux/led-class-multicolor.h
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 6e7703fd03d0..cfb1ebb6517f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -30,6 +30,16 @@ config LEDS_CLASS_FLASH
[...]
> +static int led_multicolor_init_color_dir(struct led_classdev_mc_data *data,
> + struct led_classdev_mc *mcled_cdev)
> +{
> + struct led_classdev *led_cdev = mcled_cdev->led_cdev;
> + u32 color_id;
> + int ret;
> + int i, j = 0;
> +
> + data->mcled_cdev = mcled_cdev;
> +
> + ret = sysfs_create_group(&led_cdev->dev->kobj, &led_color_group);
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < LED_COLOR_ID_MAX; i++) {
> + color_id = (mcled_cdev->available_colors & (1 << i));
Please use bitops for accessing available_colors.
> + if (color_id) {
Here you need: if (test_bit(i, &mcled_cdev->available_colors))
> + ret = led_multicolor_init_color(data, mcled_cdev, i, j);
> + if (ret)
> + break;
> +
> + j++;
> + }
> + }
> +
> + return ret;
> +}
--
Best regards,
Jacek Anaszewski
next prev parent reply other threads:[~2019-09-21 18:08 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-20 17:41 [PATCH v8 0/9] Multicolor FW v8 update Dan Murphy
2019-09-20 17:41 ` [PATCH v8 1/9] leds: multicolor: Add sysfs interface definition Dan Murphy
2019-09-21 10:55 ` Jacek Anaszewski
2019-09-23 14:23 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 2/9] documention: leds: Add multicolor class documentation Dan Murphy
2019-09-21 12:28 ` Jacek Anaszewski
2019-09-23 14:50 ` Dan Murphy
2019-09-23 21:21 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 3/9] dt: bindings: Add multicolor class dt bindings documention Dan Murphy
2019-09-21 12:57 ` Jacek Anaszewski
2019-09-23 14:52 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 4/9] dt-bindings: leds: Add multicolor ID to the color ID list Dan Murphy
2019-09-21 12:58 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 5/9] " Dan Murphy
2019-09-21 12:59 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 6/9] leds: multicolor: Introduce a multicolor class definition Dan Murphy
2019-09-21 13:30 ` Jacek Anaszewski
2019-09-23 15:14 ` Dan Murphy
2019-09-23 21:36 ` Jacek Anaszewski
2019-09-21 18:08 ` Jacek Anaszewski [this message]
2019-09-23 15:11 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 7/9] dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers Dan Murphy
2019-09-21 15:13 ` Jacek Anaszewski
2019-09-23 15:28 ` Dan Murphy
2019-09-23 21:42 ` Jacek Anaszewski
2019-09-24 14:52 ` Dan Murphy
2019-09-20 17:41 ` [PATCH v8 8/9] leds: lp50xx: Add the LP50XX family of the RGB LED driver Dan Murphy
2019-09-21 15:11 ` Jacek Anaszewski
2019-09-23 17:56 ` Dan Murphy
2019-09-23 21:59 ` Jacek Anaszewski
2019-09-20 17:41 ` [PATCH v8 9/9] leds: Update the lp55xx to use the multi color framework Dan Murphy
2019-09-21 18:06 ` Jacek Anaszewski
[not found] ` <b3ba9d9f-5267-8184-e858-e09b4debcdb6@ti.com>
2019-09-23 22:13 ` Jacek Anaszewski
2019-09-22 8:29 ` kbuild test robot
2019-09-20 17:44 ` [PATCH v8 0/9] Multicolor FW v8 update Randy Dunlap
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=135685e7-e3cc-da4d-3349-9affba5b89cc@gmail.com \
--to=jacek.anaszewski@gmail.com \
--cc=dmurphy@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=pavel@ucw.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox