sd8688 firmware location

sd8688 firmware location

[Lubomir Rintel]

Hi!

btmrvl_sdio and libertas_sdio both use firmware files sd8688.bin and
sd8688_helper.bin. In linux-firmware, they're present in libertas/ tree and
(since 3d32a58b) libertas_sdio perfers loading it from there, while it is able
to fallback to load it from linux-firmware root. btmrvl_sdio, on the other hand
only looks in the root and ends up not being successful.

Obviously, there are two solutions to the problem -- either teach btmrvl_sdio
to look into libertas/, or move the files in linux-firmware tree. I don't
really have a strong preference, though it probably makes less sense to keep in
in libertas/, since the bluetooth hardware is not really marketed as "Libertas."

I'm following up with patches to linux and linux-firmware and I'd be very
thankful if you could pick one (not both of them).

Have a nice day!
--
Lubomir Rintel       >o
                      (\)

[PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Lubomir Rintel]

linux-firmware ships the sd8688* firmware images that are shared with
libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
and so should we.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
 drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
 2 files changed, 26 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 9959d4c..494f921 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -83,22 +83,28 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
-	.helper		= "sd8688_helper.bin",
-	.firmware	= "sd8688.bin",
+	.helper		= "libertas/sd8688_helper.bin",
+	.helper2	= "sd8688_helper.bin",
+	.firmware	= "libertas/sd8688.bin",
+	.firmware2	= "sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
+	.helper2	= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
+	.firmware2	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
 	.helper		= NULL,
+	.helper2	= NULL,
 	.firmware	= "mrvl/sd8797_uapsta.bin",
+	.firmware2	= NULL,
 	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
@@ -260,6 +266,11 @@ static int btmrvl_sdio_download_helper(struct btmrvl_sdio_card *card)
 
 	ret = request_firmware(&fw_helper, card->helper,
 						&card->func->dev);
+	if (ret < 0 && card->helper2) {
+		release_firmware(fw_helper);
+		ret = request_firmware(&fw_helper, card->helper2,
+							&card->func->dev);
+	}
 	if ((ret < 0) || !fw_helper) {
 		BT_ERR("request_firmware(helper) failed, error code = %d",
 									ret);
@@ -360,6 +371,11 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
 
 	ret = request_firmware(&fw_firmware, card->firmware,
 							&card->func->dev);
+	if (ret < 0 && card->firmware2) {
+		release_firmware(fw_firmware);
+		ret = request_firmware(&fw_firmware, card->firmware2,
+							&card->func->dev);
+	}
 	if ((ret < 0) || !fw_firmware) {
 		BT_ERR("request_firmware(firmware) failed, error code = %d",
 									ret);
@@ -970,7 +986,9 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 	if (id->driver_data) {
 		struct btmrvl_sdio_device *data = (void *) id->driver_data;
 		card->helper = data->helper;
+		card->helper2 = data->helper2;
 		card->firmware = data->firmware;
+		card->firmware2 = data->firmware2;
 		card->reg = data->reg;
 		card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
 	}
@@ -1186,6 +1204,8 @@ MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE("sd8688_helper.bin");
+MODULE_FIRMWARE("libertas/sd8688_helper.bin");
 MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("libertas/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 43d35a6..4a5a019 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -84,7 +84,9 @@ struct btmrvl_sdio_card {
 	struct sdio_func *func;
 	u32 ioport;
 	const char *helper;
+	const char *helper2;
 	const char *firmware;
+	const char *firmware2;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
@@ -92,8 +94,8 @@ struct btmrvl_sdio_card {
 };
 
 struct btmrvl_sdio_device {
-	const char *helper;
-	const char *firmware;
+	const char *helper, *helper2;
+	const char *firmware, *firmware2;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 };
-- 
1.7.1

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Marcel Holtmann]

Hi Lubomir,

> linux-firmware ships the sd8688* firmware images that are shared with
> libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> and so should we.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
>  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
>  2 files changed, 26 insertions(+), 4 deletions(-)

NAK from me on this one. I do not want the driver to check two
locations. That is what userspace can work around.

If we want to unify the location between the WiFi driver and the
Bluetooth driver, I am fine with that, but seriously, just pick one over
the other. I do not care which one.

Regards

Marcel

RE: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Bing Zhao]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1049 bytes --]


> > linux-firmware ships the sd8688* firmware images that are shared with
> > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > and so should we.
> >
> > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > ---
> >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> >  2 files changed, 26 insertions(+), 4 deletions(-)
> 
> NAK from me on this one. I do not want the driver to check two
> locations. That is what userspace can work around.
> 
> If we want to unify the location between the WiFi driver and the
> Bluetooth driver, I am fine with that, but seriously, just pick one over
> the other. I do not care which one.

The unified location is mrvl/ directory.

We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?

Regards,
Bing

ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

RE: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Lubomir Rintel]

On Tue, 2013-01-08 at 18:43 -0800, Bing Zhao wrote:
> > > linux-firmware ships the sd8688* firmware images that are shared with
> > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > and so should we.
> > >
> > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > ---
> > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > 
> > NAK from me on this one. I do not want the driver to check two
> > locations. That is what userspace can work around.
> > 
> > If we want to unify the location between the WiFi driver and the
> > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > the other. I do not care which one.
> 
> The unified location is mrvl/ directory.
> 
> We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?

That would break existing setups, wouldn't it?

I was under impression (commit 3d32a58b) that we care about
compatibility here. Do we?

--
Lubomir Rintel

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Marcel Holtmann]

Hi Lubomir,

> > > > linux-firmware ships the sd8688* firmware images that are shared with
> > > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > > and so should we.
> > > >
> > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > > ---
> > > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > > 
> > > NAK from me on this one. I do not want the driver to check two
> > > locations. That is what userspace can work around.
> > > 
> > > If we want to unify the location between the WiFi driver and the
> > > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > > the other. I do not care which one.
> > 
> > The unified location is mrvl/ directory.
> > 
> > We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?
> 
> That would break existing setups, wouldn't it?
> 
> I was under impression (commit 3d32a58b) that we care about
> compatibility here. Do we?

that is what symlinks are for.

Regards

Marcel

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Lubomir Rintel]

On Tue, 2013-01-08 at 22:35 -0800, Marcel Holtmann wrote:
> Hi Lubomir,
> 
> > > > > linux-firmware ships the sd8688* firmware images that are shared with
> > > > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > > > and so should we.
> > > > >
> > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > > > ---
> > > > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > > > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > > > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > > > 
> > > > NAK from me on this one. I do not want the driver to check two
> > > > locations. That is what userspace can work around.
> > > > 
> > > > If we want to unify the location between the WiFi driver and the
> > > > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > > > the other. I do not care which one.
> > > 
> > > The unified location is mrvl/ directory.
> > > 
> > > We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?
> > 
> > That would break existing setups, wouldn't it?
> > 
> > I was under impression (commit 3d32a58b) that we care about
> > compatibility here. Do we?
> 
> that is what symlinks are for.

David, Ben: please pull the following branch then:
git pull git://github.com/lkundrak/linux-firmware.git sd8688-move

Thank you!

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1759 bytes --]

On Fri, 2013-01-18 at 08:33 +0100, Lubomir Rintel wrote:
> On Tue, 2013-01-08 at 22:35 -0800, Marcel Holtmann wrote:
> > Hi Lubomir,
> > 
> > > > > > linux-firmware ships the sd8688* firmware images that are shared with
> > > > > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > > > > and so should we.
> > > > > >
> > > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > > > > ---
> > > > > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > > > > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > > > > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > > > > 
> > > > > NAK from me on this one. I do not want the driver to check two
> > > > > locations. That is what userspace can work around.
> > > > > 
> > > > > If we want to unify the location between the WiFi driver and the
> > > > > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > > > > the other. I do not care which one.
> > > > 
> > > > The unified location is mrvl/ directory.
> > > > 
> > > > We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?
> > > 
> > > That would break existing setups, wouldn't it?
> > > 
> > > I was under impression (commit 3d32a58b) that we care about
> > > compatibility here. Do we?
> > 
> > that is what symlinks are for.
> 
> David, Ben: please pull the following branch then:
> git pull git://github.com/lkundrak/linux-firmware.git sd8688-move
> 
> Thank you!

The symlinks are broken, and you didn't update WHENCE.

Ben.

-- 
Ben Hutchings
Q.  Which is the greater problem in the world today, ignorance or apathy?
A.  I don't know and I couldn't care less.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Lubomir Rintel]

On Mon, 2013-01-21 at 01:12 +0000, Ben Hutchings wrote:
> On Fri, 2013-01-18 at 08:33 +0100, Lubomir Rintel wrote:
> > On Tue, 2013-01-08 at 22:35 -0800, Marcel Holtmann wrote:
> > > Hi Lubomir,
> > > 
> > > > > > > linux-firmware ships the sd8688* firmware images that are shared with
> > > > > > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > > > > > and so should we.
> > > > > > >
> > > > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > > > > > ---
> > > > > > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > > > > > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > > > > > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > > > > > 
> > > > > > NAK from me on this one. I do not want the driver to check two
> > > > > > locations. That is what userspace can work around.
> > > > > > 
> > > > > > If we want to unify the location between the WiFi driver and the
> > > > > > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > > > > > the other. I do not care which one.
> > > > > 
> > > > > The unified location is mrvl/ directory.
> > > > > 
> > > > > We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?
> > > > 
> > > > That would break existing setups, wouldn't it?
> > > > 
> > > > I was under impression (commit 3d32a58b) that we care about
> > > > compatibility here. Do we?
> > > 
> > > that is what symlinks are for.
> > 
> > David, Ben: please pull the following branch then:
> > git pull git://github.com/lkundrak/linux-firmware.git sd8688-move
> > 
> > Thank you!
> 
> The symlinks are broken, and you didn't update WHENCE.

Oops, sorry for that. Fixed now, please pull:
git pull git://github.com/lkundrak/linux-firmware.git sd8688-move

Thank you!

Re: [PATCH] Bluetooth: btmrvl_sdio: look for sd8688 firmware in alternate place

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2168 bytes --]

On Sun, 2013-01-27 at 12:21 +0100, Lubomir Rintel wrote:
> On Mon, 2013-01-21 at 01:12 +0000, Ben Hutchings wrote:
> > On Fri, 2013-01-18 at 08:33 +0100, Lubomir Rintel wrote:
> > > On Tue, 2013-01-08 at 22:35 -0800, Marcel Holtmann wrote:
> > > > Hi Lubomir,
> > > > 
> > > > > > > > linux-firmware ships the sd8688* firmware images that are shared with
> > > > > > > > libertas_sdio WiFi driver under libertas/. libertas_sdio looks in both places
> > > > > > > > and so should we.
> > > > > > > >
> > > > > > > > Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> > > > > > > > ---
> > > > > > > >  drivers/bluetooth/btmrvl_sdio.c |   24 ++++++++++++++++++++++--
> > > > > > > >  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
> > > > > > > >  2 files changed, 26 insertions(+), 4 deletions(-)
> > > > > > > 
> > > > > > > NAK from me on this one. I do not want the driver to check two
> > > > > > > locations. That is what userspace can work around.
> > > > > > > 
> > > > > > > If we want to unify the location between the WiFi driver and the
> > > > > > > Bluetooth driver, I am fine with that, but seriously, just pick one over
> > > > > > > the other. I do not care which one.
> > > > > > 
> > > > > > The unified location is mrvl/ directory.
> > > > > > 
> > > > > > We can probably move SD8688 firmware & helper binaries to mrvl/ and have both drivers grab the images there?
> > > > > 
> > > > > That would break existing setups, wouldn't it?
> > > > > 
> > > > > I was under impression (commit 3d32a58b) that we care about
> > > > > compatibility here. Do we?
> > > > 
> > > > that is what symlinks are for.
> > > 
> > > David, Ben: please pull the following branch then:
> > > git pull git://github.com/lkundrak/linux-firmware.git sd8688-move
> > > 
> > > Thank you!
> > 
> > The symlinks are broken, and you didn't update WHENCE.
> 
> Oops, sorry for that. Fixed now, please pull:
> git pull git://github.com/lkundrak/linux-firmware.git sd8688-move
> 
> Thank you!

Pulled and will be pushed out shortly.  Sorry for the delay.

Ben.

-- 
Ben Hutchings
Sturgeon's Law: Ninety percent of everything is crap.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

[PATCH] bluetooth: btmrvl_sdio: look for sd8688 firmware in proper location

[Lubomir Rintel]

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/bluetooth/btmrvl_sdio.c |    8 ++++----
 drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 3f4bfc8..bc27d01 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -83,8 +83,8 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
-	.helper		= "sd8688_helper.bin",
-	.firmware	= "sd8688.bin",
+	.helper		= "mrvl/sd8688_helper.bin",
+	.firmware	= "mrvl/sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -1179,7 +1179,7 @@ MODULE_AUTHOR("Marvell International Ltd.");
 MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
-MODULE_FIRMWARE("sd8688_helper.bin");
-MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 43d35a6..4a5a019 100644
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -84,7 +84,9 @@ struct btmrvl_sdio_card {
 	struct sdio_func *func;
 	u32 ioport;
 	const char *helper;
+	const char *helper2;
 	const char *firmware;
+	const char *firmware2;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 	u8 rx_unit;
@@ -92,8 +94,8 @@ struct btmrvl_sdio_card {
 };
 
 struct btmrvl_sdio_device {
-	const char *helper;
-	const char *firmware;
+	const char *helper, *helper2;
+	const char *firmware, *firmware2;
 	const struct btmrvl_sdio_card_reg *reg;
 	u16 sd_blksz_fw_dl;
 };
-- 
1.7.1

Re: [PATCH] bluetooth: btmrvl_sdio: look for sd8688 firmware in proper location

[Marcel Holtmann]

Hi Lubumir,

proper commit message with explanation here please.

> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  drivers/bluetooth/btmrvl_sdio.c |    8 ++++----
>  drivers/bluetooth/btmrvl_sdio.h |    6 ++++--
>  2 files changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
> index 3f4bfc8..bc27d01 100644
> --- a/drivers/bluetooth/btmrvl_sdio.c
> +++ b/drivers/bluetooth/btmrvl_sdio.c
> @@ -83,8 +83,8 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
>  };
>  
>  static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
> -	.helper		= "sd8688_helper.bin",
> -	.firmware	= "sd8688.bin",
> +	.helper		= "mrvl/sd8688_helper.bin",
> +	.firmware	= "mrvl/sd8688.bin",
>  	.reg		= &btmrvl_reg_8688,
>  	.sd_blksz_fw_dl	= 64,
>  };
> @@ -1179,7 +1179,7 @@ MODULE_AUTHOR("Marvell International Ltd.");
>  MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
>  MODULE_VERSION(VERSION);
>  MODULE_LICENSE("GPL v2");
> -MODULE_FIRMWARE("sd8688_helper.bin");
> -MODULE_FIRMWARE("sd8688.bin");
> +MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
> +MODULE_FIRMWARE("mrvl/sd8688.bin");
>  MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
>  MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
> diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
> index 43d35a6..4a5a019 100644
> --- a/drivers/bluetooth/btmrvl_sdio.h
> +++ b/drivers/bluetooth/btmrvl_sdio.h
> @@ -84,7 +84,9 @@ struct btmrvl_sdio_card {
>  	struct sdio_func *func;
>  	u32 ioport;
>  	const char *helper;
> +	const char *helper2;
>  	const char *firmware;
> +	const char *firmware2;

And please clear out the patch from left-overs.

>  	const struct btmrvl_sdio_card_reg *reg;
>  	u16 sd_blksz_fw_dl;
>  	u8 rx_unit;
> @@ -92,8 +94,8 @@ struct btmrvl_sdio_card {
>  };
>  
>  struct btmrvl_sdio_device {
> -	const char *helper;
> -	const char *firmware;
> +	const char *helper, *helper2;
> +	const char *firmware, *firmware2;

And here as well.

Regards

Marcel

[PATCH] bluetooth: btmrvl_sdio: look for sd8688 firmware in proper location

[Lubomir Rintel]

The firmware images are shared with libertas_sdio WiFi chip and used to be in
libertas/ subtree in linux-firmware. As btmrvl_sdio used to look into the
linux-firmware root, it ended up being unsuccessful. Since the firmware files
are not specific to the libertas hardware, they're being moved into mrvl/ now.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/bluetooth/btmrvl_sdio.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 9959d4c..1cb5183 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -83,8 +83,8 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 };
 
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
-	.helper		= "sd8688_helper.bin",
-	.firmware	= "sd8688.bin",
+	.helper		= "mrvl/sd8688_helper.bin",
+	.firmware	= "mrvl/sd8688.bin",
 	.reg		= &btmrvl_reg_8688,
 	.sd_blksz_fw_dl	= 64,
 };
@@ -1185,7 +1185,7 @@ MODULE_AUTHOR("Marvell International Ltd.");
 MODULE_DESCRIPTION("Marvell BT-over-SDIO driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
-MODULE_FIRMWARE("sd8688_helper.bin");
-MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
 MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
-- 
1.7.1

Re: [PATCH] bluetooth: btmrvl_sdio: look for sd8688 firmware in proper location

[Marcel Holtmann]

Hi Lubomir,

> The firmware images are shared with libertas_sdio WiFi chip and used to be in
> libertas/ subtree in linux-firmware. As btmrvl_sdio used to look into the
> linux-firmware root, it ended up being unsuccessful. Since the firmware files
> are not specific to the libertas hardware, they're being moved into mrvl/ now.
> 
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> ---
>  drivers/bluetooth/btmrvl_sdio.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)

Acked-by: Marcel Holtmann <marcel@holtmann.org>

Regards

Marcel

[PATCH] Move sd8688*.bin images away from libertas tree

[Lubomir Rintel]

They are (unlike rest of sd8xxx images from libertas/ and mrvl/) not Libertas
WiFi specific and are used for the bluetooth controller (btmrvl) which does not
look for them in libertas/.

This is fine for the WiFi driver that utilizes those, since it has always been
looking in this place as well.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 libertas/sd8688.bin => sd8688.bin               |  Bin 259172 -> 259172 bytes
 libertas/sd8688_helper.bin => sd8688_helper.bin |  Bin 2616 -> 2616 bytes
 2 files changed, 0 insertions(+), 0 deletions(-)
 rename libertas/sd8688.bin => sd8688.bin (100%)
 rename libertas/sd8688_helper.bin => sd8688_helper.bin (100%)

-- 
1.7.1

Re: sd8688 firmware location

[Dan Williams]

On Wed, 2013-01-09 at 00:56 +0100, Lubomir Rintel wrote:
> Hi!
> 
> btmrvl_sdio and libertas_sdio both use firmware files sd8688.bin and
> sd8688_helper.bin. In linux-firmware, they're present in libertas/ tree and
> (since 3d32a58b) libertas_sdio perfers loading it from there, while it is able
> to fallback to load it from linux-firmware root. btmrvl_sdio, on the other hand
> only looks in the root and ends up not being successful.
> 
> Obviously, there are two solutions to the problem -- either teach btmrvl_sdio
> to look into libertas/, or move the files in linux-firmware tree. I don't
> really have a strong preference, though it probably makes less sense to keep in
> in libertas/, since the bluetooth hardware is not really marketed as "Libertas."
> 
> I'm following up with patches to linux and linux-firmware and I'd be very
> thankful if you could pick one (not both of them).

So the BT part and the wifi part have different SDIO IDs; are they
actually connected separately to the SDIO bus?  Or is the chip only in
one mode at one time or something like that?  Is there a problem with
having both libertas and btmrvl loaded at the same time since they're
essentially the same chip?

I don't really mind moving stuff to mrvl/ out of libertas/ for these
devices, but I do want some backwards compat code in libertas for that.
Unless, of course, Marcel was talking about symlinks in the
linux-firmware git tree, which would be fine with me.  The important
point is that simply updating your linux-firmware package or install or
whatever *should not* result in a failed firmware load.

Dan

RE: sd8688 firmware location

[Bing Zhao]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 2265 bytes --]

Hi Dan,

> > btmrvl_sdio and libertas_sdio both use firmware files sd8688.bin and
> > sd8688_helper.bin. In linux-firmware, they're present in libertas/ tree and
> > (since 3d32a58b) libertas_sdio perfers loading it from there, while it is able
> > to fallback to load it from linux-firmware root. btmrvl_sdio, on the other hand
> > only looks in the root and ends up not being successful.
> >
> > Obviously, there are two solutions to the problem -- either teach btmrvl_sdio
> > to look into libertas/, or move the files in linux-firmware tree. I don't
> > really have a strong preference, though it probably makes less sense to keep in
> > in libertas/, since the bluetooth hardware is not really marketed as "Libertas."
> >
> > I'm following up with patches to linux and linux-firmware and I'd be very
> > thankful if you could pick one (not both of them).
> 
> So the BT part and the wifi part have different SDIO IDs; are they
> actually connected separately to the SDIO bus?  Or is the chip only in
> one mode at one time or something like that?  Is there a problem with
> having both libertas and btmrvl loaded at the same time since they're
> essentially the same chip?

SD8688 is a combo chip with different device IDs for WLAN (function 1) and BT (function 2). WLAN + BT together are connected to the bus with a single SDIO interface. Both libertas and btmrvl drivers can be loaded at the same time, and WLAN & BT functions work concurrently. Of course the SDIO bus is shared between WLAN and BT.

The firmware image can be downloaded from host to device by either libertas or btmrvl driver whoever becomes the winner from firmware downloading perspective.

Regards,
Bing

> 
> I don't really mind moving stuff to mrvl/ out of libertas/ for these
> devices, but I do want some backwards compat code in libertas for that.
> Unless, of course, Marcel was talking about symlinks in the
> linux-firmware git tree, which would be fine with me.  The important
> point is that simply updating your linux-firmware package or install or
> whatever *should not* result in a failed firmware load.
> 
> Dan
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

[PATCH] libertas sdio: look for 8688 firmware in common location

[Lubomir Rintel]

sd8688 is not only used by libertas WiFi, but shared with btmrvl bluetooth as
well.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
 drivers/net/wireless/libertas/if_sdio.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 739309e..be16a76 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -85,6 +85,7 @@ static const struct lbs_fw_table fw_table[] = {
 	{ MODEL_8686, "libertas/sd8686_v9_helper.bin", "libertas/sd8686_v9.bin" },
 	{ MODEL_8686, "libertas/sd8686_v8_helper.bin", "libertas/sd8686_v8.bin" },
 	{ MODEL_8686, "sd8686_helper.bin", "sd8686.bin" },
+	{ MODEL_8688, "mrvl/sd8688_helper.bin", "mrvl/sd8688.bin" },
 	{ MODEL_8688, "libertas/sd8688_helper.bin", "libertas/sd8688.bin" },
 	{ MODEL_8688, "sd8688_helper.bin", "sd8688.bin" },
 	{ 0, NULL, NULL }
@@ -99,6 +100,8 @@ MODULE_FIRMWARE("libertas/sd8686_v8_helper.bin");
 MODULE_FIRMWARE("libertas/sd8686_v8.bin");
 MODULE_FIRMWARE("sd8686_helper.bin");
 MODULE_FIRMWARE("sd8686.bin");
+MODULE_FIRMWARE("mrvl/sd8688_helper.bin");
+MODULE_FIRMWARE("mrvl/sd8688.bin");
 MODULE_FIRMWARE("libertas/sd8688_helper.bin");
 MODULE_FIRMWARE("libertas/sd8688.bin");
 MODULE_FIRMWARE("sd8688_helper.bin");
-- 
1.7.1

Re: sd8688 firmware location

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2093 bytes --]

On Wed, 2013-01-09 at 16:45 -0600, Dan Williams wrote:
> On Wed, 2013-01-09 at 00:56 +0100, Lubomir Rintel wrote:
> > Hi!
> > 
> > btmrvl_sdio and libertas_sdio both use firmware files sd8688.bin and
> > sd8688_helper.bin. In linux-firmware, they're present in libertas/ tree and
> > (since 3d32a58b) libertas_sdio perfers loading it from there, while it is able
> > to fallback to load it from linux-firmware root. btmrvl_sdio, on the other hand
> > only looks in the root and ends up not being successful.
> > 
> > Obviously, there are two solutions to the problem -- either teach btmrvl_sdio
> > to look into libertas/, or move the files in linux-firmware tree. I don't
> > really have a strong preference, though it probably makes less sense to keep in
> > in libertas/, since the bluetooth hardware is not really marketed as "Libertas."
> > 
> > I'm following up with patches to linux and linux-firmware and I'd be very
> > thankful if you could pick one (not both of them).
> 
> So the BT part and the wifi part have different SDIO IDs; are they
> actually connected separately to the SDIO bus?  Or is the chip only in
> one mode at one time or something like that?  Is there a problem with
> having both libertas and btmrvl loaded at the same time since they're
> essentially the same chip?
> 
> I don't really mind moving stuff to mrvl/ out of libertas/ for these
> devices, but I do want some backwards compat code in libertas for that.
> Unless, of course, Marcel was talking about symlinks in the
> linux-firmware git tree, which would be fine with me.  The important
> point is that simply updating your linux-firmware package or install or
> whatever *should not* result in a failed firmware load.

The general policy for linux-firmware.git has been that all filenames
required by all mainline kernel releases will be supported indefinitely.
There is already precedent for compatibility symlinks.

Ben.

-- 
Ben Hutchings
Q.  Which is the greater problem in the world today, ignorance or apathy?
A.  I don't know and I couldn't care less.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]