From: Hannes Reinecke <hare@suse.de>
To: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: linux-kernel@vger.kernel.org, Stefan Weinhuber <wein@de.ibm.com>,
Heiko Carstens <heiko.carstens@de.ibm.com>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 8/9] dasd: Add 'timeout' attribute
Date: Wed, 30 Jan 2013 10:26:18 +0100 [thread overview]
Message-ID: <1359537979-39483-9-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1359537979-39483-1-git-send-email-hare@suse.de>
This patch adds a 'timeout' attibute to the DASD driver.
When set to non-zero, the blk_timeout function will
be enabled with the timeout specified in the attribute.
Setting 'timeout' to '0' will disable block timeouts.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/s390/block/dasd.c | 2 +
drivers/s390/block/dasd_devmap.c | 56 ++++++++++++++++++++++++++++++++++++++
drivers/s390/block/dasd_int.h | 4 +++
3 files changed, 62 insertions(+), 0 deletions(-)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index bab870b..64b1b81 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2785,6 +2785,8 @@ enum blk_eh_timer_return dasd_times_out(struct request *req)
return BLK_EH_NOT_HANDLED;
device = cqr->startdev ? cqr->startdev : block->base;
+ if (!device->blk_timeout)
+ return BLK_EH_RESET_TIMER;
DBF_DEV_EVENT(DBF_WARNING, device,
" dasd_times_out cqr %p status %x",
cqr, cqr->status);
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index d237e31..91d656a6c 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -1281,6 +1281,61 @@ dasd_retries_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR(retries, 0644, dasd_retries_show, dasd_retries_store);
+static ssize_t
+dasd_timeout_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct dasd_device *device;
+ int len;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device))
+ return -ENODEV;
+ len = snprintf(buf, PAGE_SIZE, "%lu\n", device->blk_timeout);
+ dasd_put_device(device);
+ return len;
+}
+
+static ssize_t
+dasd_timeout_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct dasd_device *device;
+ struct request_queue *q;
+ unsigned long val, flags;
+
+ device = dasd_device_from_cdev(to_ccwdev(dev));
+ if (IS_ERR(device) || !device->block)
+ return -ENODEV;
+
+ if ((strict_strtoul(buf, 10, &val) != 0) ||
+ val > UINT_MAX / HZ) {
+ dasd_put_device(device);
+ return -EINVAL;
+ }
+ q = device->block->request_queue;
+ if (!q) {
+ dasd_put_device(device);
+ return -ENODEV;
+ }
+ spin_lock_irqsave(&device->block->request_queue_lock, flags);
+ if (!val)
+ blk_queue_rq_timed_out(q, NULL);
+ else
+ blk_queue_rq_timed_out(q, dasd_times_out);
+
+ device->blk_timeout = val;
+
+ blk_queue_rq_timeout(q, device->blk_timeout * HZ);
+ spin_unlock_irqrestore(&device->block->request_queue_lock, flags);
+
+ dasd_put_device(device);
+ return count;
+}
+
+static DEVICE_ATTR(timeout, 0644,
+ dasd_timeout_show, dasd_timeout_store);
+
static ssize_t dasd_reservation_policy_show(struct device *dev,
struct device_attribute *attr,
char *buf)
@@ -1392,6 +1447,7 @@ static struct attribute * dasd_attrs[] = {
&dev_attr_failfast.attr,
&dev_attr_expires.attr,
&dev_attr_retries.attr,
+ &dev_attr_timeout.attr,
&dev_attr_reservation_policy.attr,
&dev_attr_last_known_reservation_state.attr,
&dev_attr_safe_offline.attr,
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 375ba1f..d00d07a 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -469,6 +469,8 @@ struct dasd_device {
unsigned long default_expires;
unsigned long default_retries;
+ unsigned long blk_timeout;
+
struct dentry *debugfs_dentry;
struct dasd_profile profile;
};
@@ -662,6 +664,8 @@ void dasd_free_device(struct dasd_device *);
struct dasd_block *dasd_alloc_block(void);
void dasd_free_block(struct dasd_block *);
+enum blk_eh_timer_return dasd_times_out(struct request *req);
+
void dasd_enable_device(struct dasd_device *);
void dasd_set_target_state(struct dasd_device *, int);
void dasd_kick_device(struct dasd_device *);
--
1.7.4.2
next prev parent reply other threads:[~2013-01-30 9:27 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-30 9:26 [PATCH 0/9][v2] dasd: implement block timeout Hannes Reinecke
2013-01-30 9:26 ` [PATCH 1/9] dasd: Clarify comment Hannes Reinecke
2013-01-30 9:26 ` [PATCH 2/9] dasd: make number of retries configurable Hannes Reinecke
2013-01-30 9:26 ` [PATCH 3/9] dasd: process all requests in the device tasklet Hannes Reinecke
2013-01-30 9:26 ` [PATCH 4/9] dasd: Implement block timeout handling Hannes Reinecke
2013-01-30 9:26 ` [PATCH 5/9] dasd: Reduce amount of messages for specific errors Hannes Reinecke
2013-01-30 9:26 ` [PATCH 6/9] dasd: detailed I/O errors Hannes Reinecke
2013-01-30 9:26 ` [PATCH 7/9] block: check for timeout function in blk_rq_timed_out() Hannes Reinecke
2013-01-30 9:26 ` Hannes Reinecke [this message]
2013-01-30 9:26 ` [PATCH 9/9] dasd: Fail all requests when DASD_FLAG_ABORTIO is set Hannes Reinecke
2013-01-30 16:15 ` [PATCH 0/9][v2] dasd: implement block timeout Stefan Weinhuber
-- strict thread matches above, loose matches on Subject: below --
2013-06-03 15:03 [PATCH 0/9] " Martin Schwidefsky
2013-06-03 15:03 ` [PATCH 8/9] dasd: Add 'timeout' attribute Martin Schwidefsky
2013-01-29 7:11 [PATCH 0/9] dasd: implement block timeout Hannes Reinecke
2013-01-29 7:12 ` [PATCH 8/9] dasd: Add 'timeout' attribute Hannes Reinecke
2013-01-29 11:36 ` Heiko Carstens
2013-01-29 11:41 ` Hannes Reinecke
2013-01-29 15:17 ` Stefan Weinhuber
2013-01-29 15:27 ` Hannes Reinecke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359537979-39483-9-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=heiko.carstens@de.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=schwidefsky@de.ibm.com \
--cc=wein@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).