linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manjunath Goudar <manjunath.goudar@linaro.org>
To: linux-usb@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, patches@linaro.org,
	stern@rowland.harvard.edu, arnd@linaro.org,
	gregkh@linuxfoundation.org,
	Manjunath Goudar <manjunath.goudar@linaro.org>,
	Greg KH <greg@kroah.com>, Eric Miao <eric.y.miao@gmail.com>,
	Haojian Zhuang <haojian.zhuang@gmail.com>,
	Russell King <linux@arm.linux.org.uk>,
	linux-kernel@vger.kernel.org
Subject: [V2 4/8] USB: EHCI: make ehci-mv as separate static driver
Date: Fri, 15 Feb 2013 15:54:09 +0530	[thread overview]
Message-ID: <1360923853-7875-5-git-send-email-manjunath.goudar@linaro.org> (raw)
In-Reply-To: <1360923853-7875-1-git-send-email-manjunath.goudar@linaro.org>

Separate the mv host controller driver from ehci-hcd host code
into its own static driver module.

In V2:
No changes only Cc list changed in this patch.

Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/usb/host/Kconfig    |    2 +-
 drivers/usb/host/Makefile   |    1 +
 drivers/usb/host/ehci-hcd.c |    6 +---
 drivers/usb/host/ehci-mv.c  |   78 +++++++++++++++++++------------------------
 4 files changed, 38 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 8ffbafa..2aa4ece 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -221,7 +221,7 @@ config USB_EHCI_S5P
 	 Enable support for the S5P SOC's on-chip EHCI controller.
 
 config USB_EHCI_MV
-	bool "EHCI support for Marvell on-chip controller"
+	tristate "EHCI support for Marvell on-chip controller"
 	depends on USB_EHCI_HCD && (ARCH_PXA || ARCH_MMP)
 	select USB_EHCI_ROOT_HUB_TT
 	---help---
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 77e0331..d593017 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o
 obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
 obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
 obj-$(CONFIG_USB_EHCI_S5P)      += ehci-s5p.o
+obj-$(CONFIG_USB_EHCI_MV)       += ehci-mv.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index fa0e665..9cf4d73 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1317,11 +1317,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ehci_grlib_driver
 #endif
 
-#ifdef CONFIG_USB_EHCI_MV
-#include "ehci-mv.c"
-#define        PLATFORM_DRIVER         ehci_mv_driver
-#endif
-
 #ifdef CONFIG_MIPS_SEAD3
 #include "ehci-sead3.c"
 #define	PLATFORM_DRIVER		ehci_hcd_sead3_driver
@@ -1335,6 +1330,7 @@ MODULE_LICENSE ("GPL");
 	!defined(PLATFORM_DRIVER) && \
 	!IS_ENABLED(CONFIG_ARCH_AT91) && \
 	!IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
+	!IS_ENABLED(CONFIG_USB_EHCI_MV) && \
 	!defined(PS3_SYSTEM_BUS_DRIVER) && \
 	!defined(OF_PLATFORM_DRIVER) && \
 	!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index 3065809..0d92437 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -16,8 +16,18 @@
 #include <linux/err.h>
 #include <linux/usb/otg.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI mv driver"
 
 #define CAPLENGTH_MASK         (0xff)
+static const char hcd_name[] = "ehci-mv";
+static struct hc_driver __read_mostly mv_ehci_hc_driver;
 
 struct ehci_hcd_mv {
 	struct usb_hcd *hcd;
@@ -95,48 +105,6 @@ static int mv_ehci_reset(struct usb_hcd *hcd)
 	return retval;
 }
 
-static const struct hc_driver mv_ehci_hc_driver = {
-	.description = hcd_name,
-	.product_desc = "Marvell EHCI",
-	.hcd_priv_size = sizeof(struct ehci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq = ehci_irq,
-	.flags = HCD_MEMORY | HCD_USB2,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.reset = mv_ehci_reset,
-	.start = ehci_run,
-	.stop = ehci_stop,
-	.shutdown = ehci_shutdown,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue = ehci_urb_enqueue,
-	.urb_dequeue = ehci_urb_dequeue,
-	.endpoint_disable = ehci_endpoint_disable,
-	.endpoint_reset = ehci_endpoint_reset,
-	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number = ehci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data = ehci_hub_status_data,
-	.hub_control = ehci_hub_control,
-	.bus_suspend = ehci_bus_suspend,
-	.bus_resume = ehci_bus_resume,
-};
-
 static int mv_ehci_probe(struct platform_device *pdev)
 {
 	struct mv_usb_platform_data *pdata = pdev->dev.platform_data;
@@ -350,8 +318,32 @@ static struct platform_driver ehci_mv_driver = {
 	.remove = mv_ehci_remove,
 	.shutdown = mv_ehci_shutdown,
 	.driver = {
-		   .name = "mv-ehci",
+		   .name = hcd_name,
 		   .bus = &platform_bus_type,
 		   },
 	.id_table = ehci_id_table,
 };
+static const struct ehci_driver_overrides mv_overrides __initdata = {
+	.reset = mv_ehci_reset,
+};
+
+static int __init ehci_mv_init(void)
+{
+	if (usb_disabled())
+		return -ENODEV;
+
+	pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+	ehci_init_driver(&mv_ehci_hc_driver, &mv_overrides);
+	return platform_driver_register(&ehci_mv_driver);
+}
+module_init(ehci_mv_init);
+
+static void __exit ehci_mv_cleanup(void)
+{
+	platform_driver_unregister(&ehci_mv_driver);
+}
+module_exit(ehci_mv_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_ALIAS("platform:ehci-mv");
+MODULE_LICENSE("GPL");
-- 
1.7.9.5


  parent reply	other threads:[~2013-02-15 10:24 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1360923853-7875-1-git-send-email-manjunath.goudar@linaro.org>
2013-02-15 10:24 ` [V2 2/8] USB: EHCI: make ehci-atmel a separate driver Manjunath Goudar
2013-02-18  9:44   ` Bo Shen
2013-02-18 10:12     ` Arnd Bergmann
2013-02-15 10:24 ` Manjunath Goudar [this message]
2013-02-15 10:24 ` [V2 5/8] USB: EHCI: make ehci-vt8500 " Manjunath Goudar
2013-02-20 16:37   ` Alan Stern
2013-02-15 10:24 ` [V2 6/8] USB: EHCI: make ehci-msm " Manjunath Goudar
2013-02-20 16:31   ` Alan Stern
2013-02-15 10:24 ` [V2 7/8] USB: EHCI: make ehci-w90X900 " Manjunath Goudar
2013-02-20 16:33   ` Alan Stern
2013-02-15 10:24 ` [V2 8/8] USB: EHCI: make ehci-orion " Manjunath Goudar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1360923853-7875-5-git-send-email-manjunath.goudar@linaro.org \
    --to=manjunath.goudar@linaro.org \
    --cc=arnd@linaro.org \
    --cc=eric.y.miao@gmail.com \
    --cc=greg@kroah.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=haojian.zhuang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=patches@linaro.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).