[PATCHv2] dw_dmac: adjust slave_id accordingly to request line base

[Andy Shevchenko <andriy.shevchenko@linux.intel.com>]

On some hardware configurations we have got the request line with the offset.
The patch introduces convert_slave_id() helper for that cases. The request line
base is came from the driver data provided by the platform_device_id table.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
---
Since v1:
 - use driver_data instead of parsing IORESOURCE_DMA
 drivers/dma/dw_dmac.c      |   17 ++++++++++++++++-
 drivers/dma/dw_dmac_regs.h |    1 +
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
index 51c3ea2..67a868d 100644
--- a/drivers/dma/dw_dmac.c
+++ b/drivers/dma/dw_dmac.c
@@ -994,6 +994,13 @@ static inline void convert_burst(u32 *maxburst)
 		*maxburst = 0;
 }
 
+static inline void convert_slave_id(struct dw_dma_chan *dwc)
+{
+	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+
+	dwc->dma_sconfig.slave_id -= dw->request_line_base;
+}
+
 static int
 set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
 {
@@ -1008,6 +1015,7 @@ set_runtime_config(struct dma_chan *chan, struct dma_slave_config *sconfig)
 
 	convert_burst(&dwc->dma_sconfig.src_maxburst);
 	convert_burst(&dwc->dma_sconfig.dst_maxburst);
+	convert_slave_id(dwc);
 
 	return 0;
 }
@@ -1637,6 +1645,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
 
 static int dw_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *match;
 	struct dw_dma_platform_data *pdata;
 	struct resource		*io;
 	struct dw_dma		*dw;
@@ -1722,6 +1731,11 @@ static int dw_probe(struct platform_device *pdev)
 		memcpy(dw->data_width, pdata->data_width, 4);
 	}
 
+	/* Get the base request line if set */
+	match = platform_get_device_id(pdev);
+	if (match)
+		dw->request_line_base = (unsigned int)match->driver_data;
+
 	/* Calculate all channel mask before DMA setup */
 	dw->all_chan_mask = (1 << nr_channels) - 1;
 
@@ -1907,7 +1921,8 @@ MODULE_DEVICE_TABLE(of, dw_dma_id_table);
 #endif
 
 static const struct platform_device_id dw_dma_ids[] = {
-	{ "INTL9C60", 0 },
+	/* Name,	Request Line Base */
+	{ "INTL9C60",	(kernel_ulong_t)16 },
 	{ }
 };
 
diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
index 88dd8eb..3eeb766 100644
--- a/drivers/dma/dw_dmac_regs.h
+++ b/drivers/dma/dw_dmac_regs.h
@@ -248,6 +248,7 @@ struct dw_dma {
 	/* hardware configuration */
 	unsigned char		nr_masters;
 	unsigned char		data_width[4];
+	unsigned int		request_line_base;
 
 	struct dw_dma_chan	chan[0];
 };
-- 
1.7.10.4