From: Tejun Heo <tj@kernel.org>
To: linux-kernel@vger.kernel.org, laijs@cn.fujitsu.com
Cc: axboe@kernel.dk, jmoyer@redhat.com, zab@redhat.com,
Tejun Heo <tj@kernel.org>
Subject: [PATCH 02/31] workqueue: make workqueue_lock irq-safe
Date: Fri, 1 Mar 2013 19:23:53 -0800 [thread overview]
Message-ID: <1362194662-2344-3-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1362194662-2344-1-git-send-email-tj@kernel.org>
workqueue_lock will be used to synchronize areas which require
irq-safety and there isn't much benefit in keeping it not irq-safe.
Make it irq-safe.
This patch doesn't introduce any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
kernel/workqueue.c | 44 ++++++++++++++++++++++----------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index a533e77..61f78ef 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2717,10 +2717,10 @@ void drain_workqueue(struct workqueue_struct *wq)
* hotter than drain_workqueue() and already looks at @wq->flags.
* Use WQ_DRAINING so that queue doesn't have to check nr_drainers.
*/
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
if (!wq->nr_drainers++)
wq->flags |= WQ_DRAINING;
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
reflush:
flush_workqueue(wq);
@@ -2742,10 +2742,10 @@ reflush:
goto reflush;
}
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
if (!--wq->nr_drainers)
wq->flags &= ~WQ_DRAINING;
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
}
EXPORT_SYMBOL_GPL(drain_workqueue);
@@ -3235,7 +3235,7 @@ struct workqueue_struct *__alloc_workqueue_key(const char *fmt,
* list. Grab it, set max_active accordingly and add the new
* workqueue to workqueues list.
*/
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
if (workqueue_freezing && wq->flags & WQ_FREEZABLE)
for_each_pwq_cpu(cpu, wq)
@@ -3243,7 +3243,7 @@ struct workqueue_struct *__alloc_workqueue_key(const char *fmt,
list_add(&wq->list, &workqueues);
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
return wq;
err:
@@ -3287,9 +3287,9 @@ void destroy_workqueue(struct workqueue_struct *wq)
* wq list is used to freeze wq, remove from list after
* flushing is complete in case freeze races us.
*/
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
list_del(&wq->list);
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
if (wq->flags & WQ_RESCUER) {
kthread_stop(wq->rescuer->task);
@@ -3338,7 +3338,7 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
max_active = wq_clamp_max_active(max_active, wq->flags, wq->name);
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
wq->saved_max_active = max_active;
@@ -3346,16 +3346,16 @@ void workqueue_set_max_active(struct workqueue_struct *wq, int max_active)
struct pool_workqueue *pwq = get_pwq(cpu, wq);
struct worker_pool *pool = pwq->pool;
- spin_lock_irq(&pool->lock);
+ spin_lock(&pool->lock);
if (!(wq->flags & WQ_FREEZABLE) ||
!(pool->flags & POOL_FREEZING))
pwq_set_max_active(pwq, max_active);
- spin_unlock_irq(&pool->lock);
+ spin_unlock(&pool->lock);
}
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
}
EXPORT_SYMBOL_GPL(workqueue_set_max_active);
@@ -3602,7 +3602,7 @@ void freeze_workqueues_begin(void)
{
unsigned int cpu;
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
WARN_ON_ONCE(workqueue_freezing);
workqueue_freezing = true;
@@ -3612,7 +3612,7 @@ void freeze_workqueues_begin(void)
struct workqueue_struct *wq;
for_each_std_worker_pool(pool, cpu) {
- spin_lock_irq(&pool->lock);
+ spin_lock(&pool->lock);
WARN_ON_ONCE(pool->flags & POOL_FREEZING);
pool->flags |= POOL_FREEZING;
@@ -3625,11 +3625,11 @@ void freeze_workqueues_begin(void)
pwq->max_active = 0;
}
- spin_unlock_irq(&pool->lock);
+ spin_unlock(&pool->lock);
}
}
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
}
/**
@@ -3650,7 +3650,7 @@ bool freeze_workqueues_busy(void)
unsigned int cpu;
bool busy = false;
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
WARN_ON_ONCE(!workqueue_freezing);
@@ -3674,7 +3674,7 @@ bool freeze_workqueues_busy(void)
}
}
out_unlock:
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
return busy;
}
@@ -3691,7 +3691,7 @@ void thaw_workqueues(void)
{
unsigned int cpu;
- spin_lock(&workqueue_lock);
+ spin_lock_irq(&workqueue_lock);
if (!workqueue_freezing)
goto out_unlock;
@@ -3701,7 +3701,7 @@ void thaw_workqueues(void)
struct workqueue_struct *wq;
for_each_std_worker_pool(pool, cpu) {
- spin_lock_irq(&pool->lock);
+ spin_lock(&pool->lock);
WARN_ON_ONCE(!(pool->flags & POOL_FREEZING));
pool->flags &= ~POOL_FREEZING;
@@ -3719,13 +3719,13 @@ void thaw_workqueues(void)
wake_up_worker(pool);
- spin_unlock_irq(&pool->lock);
+ spin_unlock(&pool->lock);
}
}
workqueue_freezing = false;
out_unlock:
- spin_unlock(&workqueue_lock);
+ spin_unlock_irq(&workqueue_lock);
}
#endif /* CONFIG_FREEZER */
--
1.8.1.2
next prev parent reply other threads:[~2013-03-02 3:24 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-02 3:23 [PATCHSET wq/for-3.10-tmp] workqueue: implement workqueue with custom worker attributes Tejun Heo
2013-03-02 3:23 ` [PATCH 01/31] workqueue: make sanity checks less punshing using WARN_ON[_ONCE]()s Tejun Heo
2013-03-02 3:23 ` Tejun Heo [this message]
2013-03-02 3:23 ` [PATCH 03/31] workqueue: introduce kmem_cache for pool_workqueues Tejun Heo
2013-03-02 3:23 ` [PATCH 04/31] workqueue: add workqueue_struct->pwqs list Tejun Heo
2013-03-02 3:23 ` [PATCH 05/31] workqueue: replace for_each_pwq_cpu() with for_each_pwq() Tejun Heo
2013-03-02 3:23 ` [PATCH 06/31] workqueue: introduce for_each_pool() Tejun Heo
2013-03-02 3:23 ` [PATCH 07/31] workqueue: restructure pool / pool_workqueue iterations in freeze/thaw functions Tejun Heo
2013-03-10 10:09 ` Lai Jiangshan
2013-03-10 12:34 ` Tejun Heo
2013-03-02 3:23 ` [PATCH 08/31] workqueue: add wokrqueue_struct->maydays list to replace mayday cpu iterators Tejun Heo
2013-03-02 3:24 ` [PATCH 09/31] workqueue: consistently use int for @cpu variables Tejun Heo
2013-03-02 3:24 ` [PATCH 10/31] workqueue: remove workqueue_struct->pool_wq.single Tejun Heo
2013-03-02 3:24 ` [PATCH 11/31] workqueue: replace get_pwq() with explicit per_cpu_ptr() accesses and first_pwq() Tejun Heo
2013-03-02 3:24 ` [PATCH 12/31] workqueue: update synchronization rules on workqueue->pwqs Tejun Heo
2013-03-10 10:09 ` Lai Jiangshan
2013-03-10 12:38 ` Tejun Heo
2013-03-12 18:20 ` [PATCH v2 " Tejun Heo
2013-03-02 3:24 ` [PATCH 13/31] workqueue: update synchronization rules on worker_pool_idr Tejun Heo
2013-03-12 18:20 ` [PATCH v2 " Tejun Heo
2013-03-02 3:24 ` [PATCH 14/31] workqueue: replace POOL_MANAGING_WORKERS flag with worker_pool->manager_mutex Tejun Heo
2013-03-10 10:09 ` Lai Jiangshan
2013-03-10 12:46 ` Tejun Heo
2013-03-12 18:19 ` [PATCH v2 " Tejun Heo
2013-03-02 3:24 ` [PATCH 15/31] workqueue: separate out init_worker_pool() from init_workqueues() Tejun Heo
2013-03-02 3:24 ` [PATCH 16/31] workqueue: introduce workqueue_attrs Tejun Heo
2013-03-04 18:37 ` [PATCH v2 " Tejun Heo
2013-03-05 22:29 ` Ryan Mallon
2013-03-05 22:33 ` Tejun Heo
2013-03-05 22:34 ` Tejun Heo
2013-03-05 22:40 ` Ryan Mallon
2013-03-05 22:44 ` Tejun Heo
2013-03-05 23:20 ` Ryan Mallon
2013-03-05 23:28 ` Tejun Heo
2013-03-02 3:24 ` [PATCH 17/31] workqueue: implement attribute-based unbound worker_pool management Tejun Heo
2013-03-10 10:08 ` Lai Jiangshan
2013-03-10 12:58 ` Tejun Heo
2013-03-10 18:36 ` Tejun Heo
2013-03-12 18:21 ` [PATCH v2 " Tejun Heo
2013-03-02 3:24 ` [PATCH 18/31] workqueue: remove unbound_std_worker_pools[] and related helpers Tejun Heo
2013-03-02 3:24 ` [PATCH 19/31] workqueue: drop "std" from cpu_std_worker_pools and for_each_std_worker_pool() Tejun Heo
2013-03-02 3:24 ` [PATCH 20/31] workqueue: add pool ID to the names of unbound kworkers Tejun Heo
2013-03-02 3:24 ` [PATCH 21/31] workqueue: drop WQ_RESCUER and test workqueue->rescuer for NULL instead Tejun Heo
2013-03-02 3:24 ` [PATCH 22/31] workqueue: restructure __alloc_workqueue_key() Tejun Heo
2013-03-02 3:24 ` [PATCH 23/31] workqueue: implement get/put_pwq() Tejun Heo
2013-03-02 3:24 ` [PATCH 24/31] workqueue: prepare flush_workqueue() for dynamic creation and destrucion of unbound pool_workqueues Tejun Heo
2013-03-02 3:24 ` [PATCH 25/31] workqueue: perform non-reentrancy test when queueing to unbound workqueues too Tejun Heo
2013-03-02 3:24 ` [PATCH 26/31] workqueue: implement apply_workqueue_attrs() Tejun Heo
2013-03-02 3:24 ` [PATCH 27/31] workqueue: make it clear that WQ_DRAINING is an internal flag Tejun Heo
2013-03-02 3:24 ` [PATCH 28/31] workqueue: reject increasing max_active for ordered workqueues Tejun Heo
2013-03-04 18:30 ` [PATCH UPDATED 28/31] workqueue: reject adjusting max_active or applying attrs to " Tejun Heo
2013-03-02 3:24 ` [PATCH 29/31] cpumask: implement cpumask_parse() Tejun Heo
2013-03-02 3:24 ` [PATCH 30/31] driver/base: implement subsys_virtual_register() Tejun Heo
2013-03-02 18:17 ` Greg Kroah-Hartman
2013-03-02 20:26 ` Tejun Heo
2013-03-03 6:42 ` Kay Sievers
2013-03-05 20:43 ` Tejun Heo
2013-03-07 23:31 ` Greg Kroah-Hartman
2013-03-08 0:04 ` Kay Sievers
2013-03-10 11:57 ` Tejun Heo
2013-03-10 16:45 ` Greg Kroah-Hartman
2013-03-10 17:00 ` Kay Sievers
2013-03-10 17:24 ` Greg Kroah-Hartman
2013-03-10 17:50 ` Kay Sievers
2013-03-10 18:34 ` Tejun Heo
2013-03-12 18:40 ` Tejun Heo
2013-03-02 3:24 ` [PATCH 31/31] workqueue: implement sysfs interface for workqueues Tejun Heo
2013-03-04 18:30 ` [PATCH v2 " Tejun Heo
2013-03-05 20:41 ` [PATCHSET wq/for-3.10-tmp] workqueue: implement workqueue with custom worker attributes Tejun Heo
2013-03-10 10:34 ` Lai Jiangshan
2013-03-10 12:01 ` Tejun Heo
2013-03-11 15:24 ` Tejun Heo
2013-03-11 15:40 ` Lai Jiangshan
2013-03-11 15:42 ` Lai Jiangshan
2013-03-11 15:43 ` Tejun Heo
2013-03-12 18:10 ` Tejun Heo
2013-03-12 18:34 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362194662-2344-3-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=axboe@kernel.dk \
--cc=jmoyer@redhat.com \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=zab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox