From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: MyungJoo Ham <myungjoo.ham@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/3] extcon: arizona: Factor out magic application
Date: Tue, 26 Mar 2013 15:40:31 +0000 [thread overview]
Message-ID: <1364312433-589-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20130326154014.GD18316@opensource.wolfsonmicro.com>
We have a very similar sequence doing magic writes in several places
(one of which missed an update to interlock with the CODEC driver) so
factor it out into a function.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/extcon/extcon-arizona.c | 91 ++++++++++++++++-----------------------
1 file changed, 36 insertions(+), 55 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index dc357a4..896a923 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -100,6 +100,39 @@ static const char *arizona_cable[] = {
NULL,
};
+static void arizona_extcon_do_magic(struct arizona_extcon_info *info,
+ unsigned int magic)
+{
+ struct arizona *arizona = info->arizona;
+ unsigned int val;
+ int ret;
+
+ mutex_lock(&arizona->dapm->card->dapm_mutex);
+
+ ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
+ if (ret != 0) {
+ dev_err(arizona->dev, "Failed to read output enables: %d\n",
+ ret);
+ val = 0;
+ }
+
+ if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
+ ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
+ magic);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ ret);
+
+ ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
+ magic);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do magic: %d\n",
+ ret);
+ }
+
+ mutex_unlock(&arizona->dapm->card->dapm_mutex);
+}
+
static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)
{
struct arizona *arizona = info->arizona;
@@ -484,7 +517,6 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int report = ARIZONA_CABLE_HEADPHONE;
- unsigned int val;
int ret, reading;
mutex_lock(&info->lock);
@@ -539,28 +571,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
dev_err(arizona->dev, "Failed to report HP/line: %d\n",
ret);
- mutex_lock(&arizona->dapm->card->dapm_mutex);
-
- ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
- if (ret != 0) {
- dev_err(arizona->dev, "Failed to read output enables: %d\n",
- ret);
- val = 0;
- }
-
- if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to undo magic: %d\n",
- ret);
-
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to undo magic: %d\n",
- ret);
- }
-
- mutex_unlock(&arizona->dapm->card->dapm_mutex);
+ arizona_extcon_do_magic(info, 0);
done:
if (id_gpio)
@@ -606,13 +617,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
if (info->mic)
arizona_stop_mic(info);
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000, 0x4000);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
-
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000, 0x4000);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n", ret);
+ arizona_extcon_do_magic(info, 0x4000);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
@@ -653,7 +658,6 @@ err:
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
{
struct arizona *arizona = info->arizona;
- unsigned int val;
int ret;
dev_dbg(arizona->dev, "Starting identification via HPDET\n");
@@ -665,30 +669,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
arizona_extcon_pulse_micbias(info);
- mutex_lock(&arizona->dapm->card->dapm_mutex);
-
- ret = regmap_read(arizona->regmap, ARIZONA_OUTPUT_ENABLES_1, &val);
- if (ret != 0) {
- dev_err(arizona->dev, "Failed to read output enables: %d\n",
- ret);
- val = 0;
- }
-
- if (!(val & (ARIZONA_OUT1L_ENA | ARIZONA_OUT1R_ENA))) {
- ret = regmap_update_bits(arizona->regmap, 0x225, 0x4000,
- 0x4000);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
- ret);
-
- ret = regmap_update_bits(arizona->regmap, 0x226, 0x4000,
- 0x4000);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do magic: %d\n",
- ret);
- }
-
- mutex_unlock(&arizona->dapm->card->dapm_mutex);
+ arizona_extcon_do_magic(info, 0x4000);
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
--
1.7.10.4
next prev parent reply other threads:[~2013-03-26 15:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 15:40 [GIT PULL] extcon/ASoC: arizona: Fix interactions around HPDET Mark Brown
2013-03-26 15:40 ` Mark Brown [this message]
2013-03-26 15:40 ` [PATCH 2/3] ASoC: arizona: Fix interaction between headphone outputs and identification Mark Brown
2013-03-26 15:40 ` [PATCH 3/3] extcon: " Mark Brown
2013-03-26 15:58 ` [GIT PULL] extcon/ASoC: arizona: Fix interactions around HPDET Mark Brown
2013-03-26 16:29 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364312433-589-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=cw00.choi@samsung.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox