From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
Lee Jones <lee.jones@linaro.org>,
Yvan FILLION <yvan.fillion@stericsson.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT 2/2] regulator: ab8500: Remove set_voltage_time_sel and delay setting
Date: Wed, 27 Mar 2013 17:48:29 +0800 [thread overview]
Message-ID: <1364377709.13084.1.camel@phoenix> (raw)
In-Reply-To: <1364377642.13084.0.camel@phoenix>
The data sheet does not specify time delay for voltage selection,
thus remove set_voltage_time_sel and delay setting.
Note, currently set_voltage_time_sel callback returns 0 due to missing
delay settings.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/ab8500.c | 13 -------------
1 file changed, 13 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 1a38524..d0d9e83 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -42,7 +42,6 @@
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @voltage_shift: shift to control regulator voltage
- * @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
@@ -60,7 +59,6 @@ struct ab8500_regulator_info {
u8 voltage_reg;
u8 voltage_mask;
u8 voltage_shift;
- unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
@@ -333,15 +331,6 @@ static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
-static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
- unsigned int old_sel,
- unsigned int new_sel)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- return info->delay;
-}
-
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
@@ -352,7 +341,6 @@ static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct regulator_ops ab8500_regulator_mode_ops = {
@@ -488,7 +476,6 @@ static struct ab8500_regulator_info
.min_uV = 2000000,
.enable_time = 10000,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
--
1.7.10.4
next prev parent reply other threads:[~2013-03-27 9:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 9:47 [PATCH RFT 1/2] regulator: ab8500: Add missing enable_time settings Axel Lin
2013-03-27 9:48 ` Axel Lin [this message]
2013-03-27 10:42 ` [PATCH RFT 2/2] regulator: ab8500: Remove set_voltage_time_sel and delay setting Bengt Jönsson
2013-03-27 10:35 ` [PATCH RFT 1/2] regulator: ab8500: Add missing enable_time settings Bengt Jönsson
2013-03-27 23:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364377709.13084.1.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=bengt.g.jonsson@stericsson.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yvan.fillion@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox