From: "Lee, Chun-Yi" <joeyli.kernel@gmail.com>
To: rusty@rustcorp.com.au, dhowells@redhat.com
Cc: linux-kernel@vger.kernel.org, Chun-Yi Lee <jlee@suse.com>,
Josh Boyer <jwboyer@redhat.com>,
Randy Dunlap <rdunlap@xenotime.net>,
Herbert Xu <herbert@gondor.hengli.com.au>,
"David S. Miller" <davem@davemloft.net>
Subject: [PATCH v3] X.509: Support parse long form of length octets in Authority Key Identifier
Date: Fri, 29 Mar 2013 16:52:33 +0800 [thread overview]
Message-ID: <1364547153-1416-1-git-send-email-jlee@suse.com> (raw)
From: Chun-Yi Lee <jlee@suse.com>
Per X.509 spec in 4.2.1.1 section, the structure of Authority Key
Identifier Extension is:
AuthorityKeyIdentifier ::= SEQUENCE {
keyIdentifier [0] KeyIdentifier OPTIONAL,
authorityCertIssuer [1] GeneralNames OPTIONAL,
authorityCertSerialNumber [2] CertificateSerialNumber OPTIONAL }
KeyIdentifier ::= OCTET STRING
When a certificate also provides
authorityCertIssuer and authorityCertSerialNumber then the length of
AuthorityKeyIdentifier SEQUENCE is likely to long form format.
e.g.
The example certificate demos/tunala/A-server.pem in openssl source:
X509v3 Authority Key Identifier:
keyid:49:FB:45:72:12:C4:CC:E1:45:A1:D3:08:9E:95:C4:2C:6D:55:3F:17
DirName:/C=NZ/L=Wellington/O=Really Irresponsible Authorisation Authority (RIAA)/OU=Cert-stamping/CN=Jackov al-Trades/emailAddress=none@fake.domain
serial:00
Current parsing rule of OID_authorityKeyIdentifier only take care the
short form format, it causes load certificate to modsign_keyring fail:
[ 12.061147] X.509: Extension: 47
[ 12.075121] MODSIGN: Problem loading in-kernel X.509 certificate (-74)
So, this patch add the parsing rule for support long form format against
Authority Key Identifier.
v3:
Changed the size check in "Short Form length" case, we allow v[3] smaller
then (vlen - 4) because authorityCertIssuer and authorityCertSerialNumber
are also possible attach in AuthorityKeyIdentifier sequence.
v2:
- Removed comma from author's name.
- Moved 'Short Form length' comment inside the if-body.
- Changed the type of sub to size_t.
- Use ASN1_INDEFINITE_LENGTH rather than writing 0x80 and 127.
- Moved the key_len's value assignment before alter v.
- Fixed the typo of octets.
- Add 2 to v before entering the loop for calculate the length.
- Removed the comment of check vlen.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Josh Boyer <jwboyer@redhat.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
---
crypto/asymmetric_keys/x509_cert_parser.c | 55 ++++++++++++++++++++++++----
1 files changed, 47 insertions(+), 8 deletions(-)
diff --git a/crypto/asymmetric_keys/x509_cert_parser.c b/crypto/asymmetric_keys/x509_cert_parser.c
index 7fabc4c..59ab6d2 100644
--- a/crypto/asymmetric_keys/x509_cert_parser.c
+++ b/crypto/asymmetric_keys/x509_cert_parser.c
@@ -373,6 +373,9 @@ int rsa_extract_mpi(void *context, size_t hdrlen,
return 0;
}
+/* The keyIdentifier in AuthorityKeyIdentifier SEQUENCE is tag(CONT,PRIM,0) */
+#define SEQ_TAG_KEYID (ASN1_CONT << 6)
+
/*
* Process certificate extensions that are used to qualify the certificate.
*/
@@ -407,21 +410,57 @@ int x509_process_extension(void *context, size_t hdrlen,
}
if (ctx->last_oid == OID_authorityKeyIdentifier) {
+ size_t key_len;
+
/* Get hold of the CA key fingerprint */
if (vlen < 5)
return -EBADMSG;
- if (v[0] != (ASN1_SEQ | (ASN1_CONS << 5)) ||
- v[1] != vlen - 2 ||
- v[2] != (ASN1_CONT << 6) ||
- v[3] != vlen - 4)
+
+ /* Authority Key Identifier must be a Constructed SEQUENCE */
+ if (v[0] != (ASN1_SEQ | (ASN1_CONS << 5)))
return -EBADMSG;
- v += 4;
- vlen -= 4;
- f = kmalloc(vlen * 2 + 1, GFP_KERNEL);
+ /* Authority Key Identifier is not indefinite length */
+ if (unlikely(vlen == ASN1_INDEFINITE_LENGTH))
+ return -EBADMSG;
+
+ if (vlen < ASN1_INDEFINITE_LENGTH) {
+ /* Short Form length */
+ if (v[1] != vlen - 2 ||
+ v[2] != SEQ_TAG_KEYID ||
+ v[3] > vlen - 4)
+ return -EBADMSG;
+
+ key_len = v[3];
+ v += 4;
+ } else {
+ /* Long Form length */
+ size_t seq_len = 0;
+ size_t sub = v[1] - ASN1_INDEFINITE_LENGTH;
+
+ if (sub > 2)
+ return -EBADMSG;
+
+ /* calculate the length from subsequent octets */
+ v += 2;
+ for (i = 0; i < sub; i++) {
+ seq_len <<= 8;
+ seq_len |= v[i];
+ }
+
+ if (seq_len != vlen - 2 - sub ||
+ v[sub] != SEQ_TAG_KEYID ||
+ v[sub + 1] > vlen - 4 - sub)
+ return -EBADMSG;
+
+ key_len = v[sub + 1];
+ v += (sub + 2);
+ }
+
+ f = kmalloc(key_len * 2 + 1, GFP_KERNEL);
if (!f)
return -ENOMEM;
- for (i = 0; i < vlen; i++)
+ for (i = 0; i < key_len; i++)
sprintf(f + i * 2, "%02x", v[i]);
pr_debug("authority %s\n", f);
ctx->cert->authority = f;
--
1.6.4.2
next reply other threads:[~2013-03-29 8:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-29 8:52 Lee, Chun-Yi [this message]
2013-04-10 10:46 ` [PATCH v3] X.509: Support parse long form of length octets in Authority Key Identifier joeyli
2013-04-22 2:07 ` Rusty Russell
2013-04-22 4:22 ` joeyli
-- strict thread matches above, loose matches on Subject: below --
2013-04-19 5:01 Lee, Chun-Yi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364547153-1416-1-git-send-email-jlee@suse.com \
--to=joeyli.kernel@gmail.com \
--cc=davem@davemloft.net \
--cc=dhowells@redhat.com \
--cc=herbert@gondor.hengli.com.au \
--cc=jlee@suse.com \
--cc=jwboyer@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rdunlap@xenotime.net \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox