From: Johan Hovold <jhovold@gmail.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Ludovic Desroches <ludovic.desroches@atmel.com>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Johan Hovold <jhovold@gmail.com>
Subject: [RFC 3/5] rtc-at91rm9200: refactor interrupt-register handling
Date: Fri, 29 Mar 2013 17:03:47 +0100 [thread overview]
Message-ID: <1364573029-19346-3-git-send-email-jhovold@gmail.com> (raw)
In-Reply-To: <1364573029-19346-1-git-send-email-jhovold@gmail.com>
Add accessors for the interrupt register.
This will allow us to easily add a shadow interrupt-mask register to
use on SoCs where the interrupt-mask register cannot be used.
---
drivers/rtc/rtc-at91rm9200.c | 43 +++++++++++++++++++++++++++++--------------
1 file changed, 29 insertions(+), 14 deletions(-)
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 67260f9..cb4462d 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -50,6 +50,21 @@ static unsigned int at91_alarm_year = AT91_RTC_EPOCH;
static void __iomem *at91_rtc_regs;
static int irq;
+static void at91_rtc_write_ier(u32 mask)
+{
+ at91_rtc_write(AT91_RTC_IER, mask);
+}
+
+static void at91_rtc_write_idr(u32 mask)
+{
+ at91_rtc_write(AT91_RTC_IDR, mask);
+}
+
+static u32 at91_rtc_read_imr(void)
+{
+ return at91_rtc_read(AT91_RTC_IMR);
+}
+
/*
* Decode time/date into rtc_time structure
*/
@@ -113,9 +128,9 @@ static int at91_rtc_settime(struct device *dev, struct rtc_time *tm)
cr = at91_rtc_read(AT91_RTC_CR);
at91_rtc_write(AT91_RTC_CR, cr | AT91_RTC_UPDCAL | AT91_RTC_UPDTIM);
- at91_rtc_write(AT91_RTC_IER, AT91_RTC_ACKUPD);
+ at91_rtc_write_ier(AT91_RTC_ACKUPD);
wait_for_completion(&at91_rtc_updated); /* wait for ACKUPD interrupt */
- at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD);
+ at91_rtc_write_idr(AT91_RTC_ACKUPD);
at91_rtc_write(AT91_RTC_TIMR,
bin2bcd(tm->tm_sec) << 0
@@ -147,7 +162,7 @@ static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
tm->tm_yday = rtc_year_days(tm->tm_mday, tm->tm_mon, tm->tm_year);
tm->tm_year = at91_alarm_year - 1900;
- alrm->enabled = (at91_rtc_read(AT91_RTC_IMR) & AT91_RTC_ALARM)
+ alrm->enabled = (at91_rtc_read_imr() & AT91_RTC_ALARM)
? 1 : 0;
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
@@ -172,7 +187,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
tm.tm_min = alrm->time.tm_min;
tm.tm_sec = alrm->time.tm_sec;
- at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_write_idr(AT91_RTC_ALARM);
at91_rtc_write(AT91_RTC_TIMALR,
bin2bcd(tm.tm_sec) << 0
| bin2bcd(tm.tm_min) << 8
@@ -185,7 +200,7 @@ static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
if (alrm->enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
+ at91_rtc_write_ier(AT91_RTC_ALARM);
}
dev_dbg(dev, "%s(): %4d-%02d-%02d %02d:%02d:%02d\n", __func__,
@@ -201,9 +216,9 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
if (enabled) {
at91_rtc_write(AT91_RTC_SCCR, AT91_RTC_ALARM);
- at91_rtc_write(AT91_RTC_IER, AT91_RTC_ALARM);
+ at91_rtc_write_ier(AT91_RTC_ALARM);
} else
- at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ALARM);
+ at91_rtc_write_idr(AT91_RTC_ALARM);
return 0;
}
@@ -212,7 +227,7 @@ static int at91_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
*/
static int at91_rtc_proc(struct device *dev, struct seq_file *seq)
{
- unsigned long imr = at91_rtc_read(AT91_RTC_IMR);
+ unsigned long imr = at91_rtc_read_imr();
seq_printf(seq, "update_IRQ\t: %s\n",
(imr & AT91_RTC_ACKUPD) ? "yes" : "no");
@@ -232,7 +247,7 @@ static irqreturn_t at91_rtc_interrupt(int irq, void *dev_id)
unsigned int rtsr;
unsigned long events = 0;
- rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read(AT91_RTC_IMR);
+ rtsr = at91_rtc_read(AT91_RTC_SR) & at91_rtc_read_imr();
if (rtsr) { /* this interrupt is shared! Is it ours? */
if (rtsr & AT91_RTC_ALARM)
events |= (RTC_AF | RTC_IRQF);
@@ -327,7 +342,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
at91_rtc_write(AT91_RTC_MR, 0); /* 24 hour mode */
/* Disable all interrupts */
- at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
@@ -365,7 +380,7 @@ static int __exit at91_rtc_remove(struct platform_device *pdev)
struct rtc_device *rtc = platform_get_drvdata(pdev);
/* Disable all interrupts */
- at91_rtc_write(AT91_RTC_IDR, AT91_RTC_ACKUPD | AT91_RTC_ALARM |
+ at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
free_irq(irq, pdev);
@@ -387,13 +402,13 @@ static int at91_rtc_suspend(struct device *dev)
/* this IRQ is shared with DBGU and other hardware which isn't
* necessarily doing PM like we are...
*/
- at91_rtc_imr = at91_rtc_read(AT91_RTC_IMR)
+ at91_rtc_imr = at91_rtc_read_imr()
& (AT91_RTC_ALARM|AT91_RTC_SECEV);
if (at91_rtc_imr) {
if (device_may_wakeup(dev))
enable_irq_wake(irq);
else
- at91_rtc_write(AT91_RTC_IDR, at91_rtc_imr);
+ at91_rtc_write_idr(at91_rtc_imr);
}
return 0;
}
@@ -404,7 +419,7 @@ static int at91_rtc_resume(struct device *dev)
if (device_may_wakeup(dev))
disable_irq_wake(irq);
else
- at91_rtc_write(AT91_RTC_IER, at91_rtc_imr);
+ at91_rtc_write_ier(at91_rtc_imr);
}
return 0;
}
--
1.8.1.5
next prev parent reply other threads:[~2013-03-29 16:04 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-29 16:03 [RFC 1/5] rtc-at91rm9200: add configuration support Johan Hovold
2013-03-29 16:03 ` [RFC 2/5] rtc-at91rm9200: add device-tree support Johan Hovold
2013-03-29 16:12 ` Johan Hovold
2013-03-29 16:03 ` Johan Hovold [this message]
2013-03-29 16:03 ` [RFC 4/5] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-03-29 16:03 ` [RFC 5/5] rtc-at91rm9200: add support for at91sam9x5 Johan Hovold
2013-03-29 16:39 ` Douglas Gilbert
2013-04-02 13:06 ` [RFC PATCH] rtc: rtc-at91rm9200: manage IMR depending on revision Nicolas Ferre
2013-04-02 15:32 ` Douglas Gilbert
2013-04-02 16:28 ` Nicolas Ferre
2013-04-02 16:36 ` [RFC PATCH v2] " Nicolas Ferre
2013-04-03 9:51 ` Johan Hovold
2013-04-03 9:54 ` [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR" Johan Hovold
2013-04-03 10:03 ` [RFC v2 0/4] rtc-at91rm9200: add support for at91sam9x5 Johan Hovold
2013-04-03 10:03 ` [RFC v2 1/4] rtc-at91rm9200: add configuration support Johan Hovold
2013-04-03 10:03 ` [RFC v2 2/4] rtc-at91rm9200: refactor interrupt-register handling Johan Hovold
2013-04-03 10:03 ` [RFC v2 3/4] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-04-03 10:03 ` [RFC v2 4/4] rtc-at91rm9200: add support for at91sam9x5 Johan Hovold
2013-05-23 8:38 ` [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-05-23 8:38 ` [PATCH v3 1/5] rtc-at91rm9200: add match-table compile guard Johan Hovold
2013-05-23 8:38 ` [PATCH v3 2/5] rtc-at91rm9200: add configuration support Johan Hovold
2013-05-23 8:38 ` [PATCH v3 3/5] rtc-at91rm9200: refactor interrupt-register handling Johan Hovold
2013-05-23 8:38 ` [PATCH v3 4/5] rtc-at91rm9200: add shadow interrupt mask Johan Hovold
2013-05-23 8:38 ` [PATCH v3 5/5] rtc-at91rm9200: use shadow IMR on at91sam9x5 Johan Hovold
2013-05-29 20:33 ` [PATCH v3 0/5] rtc-at91rm9200: add shadow interrupt mask Andrew Morton
2013-05-29 20:41 ` Robert Nelson
2013-05-29 23:22 ` Douglas Gilbert
2013-05-30 8:18 ` Nicolas Ferre
2013-05-30 7:50 ` Nicolas Ferre
2013-05-30 19:36 ` Andrew Morton
2013-05-30 23:17 ` Douglas Gilbert
2013-05-31 7:54 ` Nicolas Ferre
2013-05-30 7:41 ` Nicolas Ferre
2013-04-03 10:18 ` [PATCH] Revert "drivers/rtc/rtc-at91rm9200.c: use a variable for storing IMR" Nicolas Ferre
2013-04-05 14:14 ` Nicolas Ferre
2013-04-05 15:35 ` Greg KH
2013-04-05 16:16 ` Nicolas Ferre
2013-04-03 10:37 ` [RFC PATCH v2] rtc: rtc-at91rm9200: manage IMR depending on revision Nicolas Ferre
2013-04-03 13:46 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364573029-19346-3-git-send-email-jhovold@gmail.com \
--to=jhovold@gmail.com \
--cc=dgilbert@interlog.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@atmel.com \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox