From: Tony Prisk <linux@prisktech.co.nz>
To: linus.walleij@linaro.org
Cc: swarren@wwwdotorg.org, linux-arm-kernel@lists.infradead.org,
vt8500-wm8505-linux-kernel@googlegroups.com,
linux-kernel@vger.kernel.org, Tony Prisk <linux@prisktech.co.nz>
Subject: [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
Date: Tue, 2 Apr 2013 17:40:59 +1300 [thread overview]
Message-ID: <1364877661-26086-5-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1364877661-26086-1-git-send-email-linux@prisktech.co.nz>
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8505.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8650.dtsi | 9 +++++++++
arch/arm/boot/dts/wm8850.dtsi | 9 +++++++++
4 files changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced..8e87aa9 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -32,6 +32,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "via,vt8500-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0..e4f768a 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -47,6 +47,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8505-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a1..01b6a8d 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -41,6 +41,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8650-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc..297aa05 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -48,6 +48,15 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl@d8110000 {
+ compatible = "wm,wm8850-pinctrl";
+ reg = <0xd8110000 0x10000>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pmc@d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
--
1.7.9.5
next prev parent reply other threads:[~2013-04-02 4:41 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-02 4:40 [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module Tony Prisk
2013-04-02 4:40 ` [PATCHv4 1/6] of: Add support for reading a u32 from a multi-value property Tony Prisk
2013-04-02 23:42 ` Rob Herring
2013-04-02 4:40 ` [PATCHv4 2/6] arm: vt8500: Increase available GPIOs on arch-vt8500 Tony Prisk
2013-04-02 4:40 ` [PATCHv4 3/6] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500 Tony Prisk
2013-04-02 4:40 ` Tony Prisk [this message]
2013-04-02 4:41 ` [PATCHv4 5/6] arm: vt8500: Remove gpio devicetree nodes Tony Prisk
2013-04-02 4:41 ` [PATCHv4 6/6] gpio: vt8500: Remove arch-vt8500 gpio driver Tony Prisk
2013-04-02 23:17 ` [PATCHv4 RESEND 0/6] arm: vt8500: Add support for pinctrl/gpio module Stephen Warren
-- strict thread matches above, loose matches on Subject: below --
2013-04-02 4:39 [PATCHv4 " Tony Prisk
2013-04-02 4:39 ` [PATCHv4 4/6] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver Tony Prisk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364877661-26086-5-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=swarren@wwwdotorg.org \
--cc=vt8500-wm8505-linux-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox