public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
	Lee Jones <lee.jones@linaro.org>,
	Yvan FILLION <yvan.fillion@stericsson.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] regulator: ab8500: Don't update lp_mode_req flag in set_mode() error paths
Date: Tue, 09 Apr 2013 20:17:15 +0800	[thread overview]
Message-ID: <1365509835.3801.3.camel@phoenix> (raw)
In-Reply-To: <1365509706.3801.1.camel@phoenix>

Currently, set invalid mode setting for shared mode regulators may change
sm->lp_mode_req flag. This patch ensures we don't set lp_mode_req flag to wrong
status if set_mode() fails.

This patch includes some clean up, and these changes makes this patch looks like
code refactor. The clean up is mainly to avoid adding ugly code to handle
failure paths. 

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/ab8500.c |   98 +++++++++++++++++++-------------------------
 1 file changed, 43 insertions(+), 55 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 1866dbf..88ab408 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -348,11 +348,8 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
 				     unsigned int mode)
 {
 	int ret = 0;
-	u8 bank;
-	u8 reg;
-	u8 mask;
-	u8 val;
-	bool dmr = false; /* Dedicated mode register */
+	u8 bank, reg, mask, val;
+	bool lp_mode_req = false;
 	struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
 
 	if (info == NULL) {
@@ -360,66 +357,54 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
 		return -EINVAL;
 	}
 
-	if (info->shared_mode) {
-		/*
-		 * Special case where mode is shared between two regulators.
-		 */
-		struct ab8500_shared_mode *sm = info->shared_mode;
-		mutex_lock(&shared_mode_mutex);
-
-		if (mode == REGULATOR_MODE_IDLE) {
-			sm->lp_mode_req = true; /* Low power mode requested */
-			if (!((sm->shared_regulator)->
-			      shared_mode->lp_mode_req)) {
-				mutex_unlock(&shared_mode_mutex);
-				return 0; /* Other regulator prevent LP mode */
-			}
-		} else {
-			sm->lp_mode_req = false;
-		}
-	}
-
 	if (info->mode_mask) {
-		/* Dedicated register for handling mode */
-
-		dmr = true;
-
-		switch (mode) {
-		case REGULATOR_MODE_NORMAL:
-			val = info->mode_val_normal;
-			break;
-		case REGULATOR_MODE_IDLE:
-			val = info->mode_val_idle;
-			break;
-		default:
-			ret = -EINVAL;
-			goto out_unlock;
-		}
-
 		bank = info->mode_bank;
 		reg = info->mode_reg;
 		mask = info->mode_mask;
 	} else {
-		/* Mode register same as enable register */
+		bank = info->update_bank;
+		reg = info->update_reg;
+		mask = info->update_mask;
+	}
+
+	if (info->shared_mode)
+		mutex_lock(&shared_mode_mutex);
 
-		switch (mode) {
-		case REGULATOR_MODE_NORMAL:
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		if (info->shared_mode)
+			lp_mode_req = false;
+
+		if (info->mode_mask)
+			val = info->mode_val_normal;
+		else
 			val = info->update_val_normal;
-			break;
-		case REGULATOR_MODE_IDLE:
-			val = info->update_val_idle;
-			break;
-		default:
-			ret = -EINVAL;
-			goto out_unlock;
+		break;
+	case REGULATOR_MODE_IDLE:
+		if (info->shared_mode) {
+			struct ab8500_regulator_info *shared_regulator;
+
+			shared_regulator = info->shared_mode->shared_regulator;
+			if (!shared_regulator->shared_mode->lp_mode_req) {
+				/* Other regulator prevent LP mode */
+				info->shared_mode->lp_mode_req = true;
+				goto out_unlock;
+			}
+
+			lp_mode_req = true;
 		}
 
-		bank = info->update_bank;
-		reg = info->update_reg;
-		mask = info->update_mask;
+		if (info->mode_mask)
+			val = info->mode_val_idle;
+		else
+			val = info->update_val_idle;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_unlock;
 	}
 
-	if (dmr || ab8500_regulator_is_enabled(rdev)) {
+	if (info->mode_mask || ab8500_regulator_is_enabled(rdev)) {
 		ret = abx500_mask_and_set_register_interruptible(info->dev,
 			bank, reg, mask, val);
 		if (ret < 0) {
@@ -435,9 +420,12 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
 			mask, val);
 	}
 
-	if (!dmr)
+	if (!info->mode_mask)
 		info->update_val = val;
 
+	if (info->shared_mode)
+		info->shared_mode->lp_mode_req = lp_mode_req;
+
 out_unlock:
 	if (info->shared_mode)
 		mutex_unlock(&shared_mode_mutex);
-- 
1.7.10.4




  reply	other threads:[~2013-04-09 12:17 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-09 12:15 [PATCH 1/2] regulator: ab8500: Don't update info->update_val if write to register fails Axel Lin
2013-04-09 12:17 ` Axel Lin [this message]
2013-04-17  9:49   ` [PATCH 2/2] regulator: ab8500: Don't update lp_mode_req flag in set_mode() error paths Bengt Jönsson
2013-04-16 16:51 ` [PATCH 1/2] regulator: ab8500: Don't update info->update_val if write to register fails Axel Lin
2013-04-17  9:48 ` Bengt Jönsson
2013-04-17 14:09 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1365509835.3801.3.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=bengt.g.jonsson@stericsson.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=yvan.fillion@stericsson.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox