public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>, Ingo Molnar <mingo@elte.hu>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Tejun Heo <tj@kernel.org>, Thomas Renninger <trenn@suse.de>,
	Tang Chen <tangchen@cn.fujitsu.com>
Cc: linux-kernel@vger.kernel.org, Yinghai Lu <yinghai@kernel.org>,
	Pekka Enberg <penberg@kernel.org>,
	Jacob Shin <jacob.shin@amd.com>,
	"Rafael J. Wysocki" <rjw@sisk.pl>,
	linux-acpi@vger.kernel.org
Subject: [PATCH v4 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode
Date: Thu, 11 Apr 2013 17:55:54 -0700	[thread overview]
Message-ID: <1365728168-32067-9-git-send-email-yinghai@kernel.org> (raw)
In-Reply-To: <1365728168-32067-1-git-send-email-yinghai@kernel.org>

For finding with 32bit, it would be easy to access initrd in 32bit
flat mode, as we don't need to set page table.

That is from head_32.S, and microcode updating already use this trick.

Need to change acpi_initrd_override_find to use phys to access global
variables.

Pass is_phys in the function, as we can not use address to decide if it
is phys or virtual address on 32 bit. Boot loader could load initrd above
max_low_pfn.

Don't call printk as it uses global variables, so delay print later
during copying.

Change table_sigs to use stack instead, otherwise it is too messy to change
string array to phys and still keep offset calculating correct.
That size is about 36x4 bytes, and it is small to settle in stack.

Also remove "continue" in MARCO to make code more readable.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Jacob Shin <jacob.shin@amd.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Tested-by: Thomas Renninger <trenn@suse.de>
---
 arch/x86/kernel/setup.c |  2 +-
 drivers/acpi/osl.c      | 85 ++++++++++++++++++++++++++++++++++---------------
 include/linux/acpi.h    |  5 +--
 3 files changed, 63 insertions(+), 29 deletions(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index d0cc176..16a703f 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1093,7 +1093,7 @@ void __init setup_arch(char **cmdline_p)
 	reserve_initrd();
 
 	acpi_initrd_override_find((void *)initrd_start,
-					initrd_end - initrd_start);
+					initrd_end - initrd_start, false);
 	acpi_initrd_override_copy();
 
 	reserve_crashkernel();
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index ee5c531..cce92a5 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -551,21 +551,9 @@ u8 __init acpi_table_checksum(u8 *buffer, u32 length)
 	return sum;
 }
 
-/* All but ACPI_SIG_RSDP and ACPI_SIG_FACS: */
-static const char * const table_sigs[] = {
-	ACPI_SIG_BERT, ACPI_SIG_CPEP, ACPI_SIG_ECDT, ACPI_SIG_EINJ,
-	ACPI_SIG_ERST, ACPI_SIG_HEST, ACPI_SIG_MADT, ACPI_SIG_MSCT,
-	ACPI_SIG_SBST, ACPI_SIG_SLIT, ACPI_SIG_SRAT, ACPI_SIG_ASF,
-	ACPI_SIG_BOOT, ACPI_SIG_DBGP, ACPI_SIG_DMAR, ACPI_SIG_HPET,
-	ACPI_SIG_IBFT, ACPI_SIG_IVRS, ACPI_SIG_MCFG, ACPI_SIG_MCHI,
-	ACPI_SIG_SLIC, ACPI_SIG_SPCR, ACPI_SIG_SPMI, ACPI_SIG_TCPA,
-	ACPI_SIG_UEFI, ACPI_SIG_WAET, ACPI_SIG_WDAT, ACPI_SIG_WDDT,
-	ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT, ACPI_SIG_PSDT,
-	ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, NULL };
-
 /* Non-fatal errors: Affected tables/files are ignored */
 #define INVALID_TABLE(x, path, name)					\
-	{ pr_err("ACPI OVERRIDE: " x " [%s%s]\n", path, name); continue; }
+	do { pr_err("ACPI OVERRIDE: " x " [%s%s]\n", path, name); } while (0)
 
 #define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
 
@@ -576,17 +564,45 @@ struct file_pos {
 };
 static struct file_pos __initdata acpi_initrd_files[ACPI_OVERRIDE_TABLES];
 
-void __init acpi_initrd_override_find(void *data, size_t size)
+/*
+ * acpi_initrd_override_find() is called from head_32.S and head64.c.
+ * head_32.S calling path is with 32bit flat mode, so we can access
+ * initrd early without setting pagetable or relocating initrd. For
+ * global variables accessing, we need to use phys address instead of
+ * kernel virtual address, try to put table_sigs string array in stack,
+ * so avoid switching for it.
+ * Also don't call printk as it uses global variables.
+ */
+void __init acpi_initrd_override_find(void *data, size_t size, bool is_phys)
 {
 	int sig, no, table_nr = 0;
 	long offset = 0;
 	struct acpi_table_header *table;
 	char cpio_path[32] = "kernel/firmware/acpi/";
 	struct cpio_data file;
+	struct file_pos *files = acpi_initrd_files;
+	int *all_tables_size_p = &all_tables_size;
+
+	/* All but ACPI_SIG_RSDP and ACPI_SIG_FACS: */
+	char *table_sigs[] = {
+		ACPI_SIG_BERT, ACPI_SIG_CPEP, ACPI_SIG_ECDT, ACPI_SIG_EINJ,
+		ACPI_SIG_ERST, ACPI_SIG_HEST, ACPI_SIG_MADT, ACPI_SIG_MSCT,
+		ACPI_SIG_SBST, ACPI_SIG_SLIT, ACPI_SIG_SRAT, ACPI_SIG_ASF,
+		ACPI_SIG_BOOT, ACPI_SIG_DBGP, ACPI_SIG_DMAR, ACPI_SIG_HPET,
+		ACPI_SIG_IBFT, ACPI_SIG_IVRS, ACPI_SIG_MCFG, ACPI_SIG_MCHI,
+		ACPI_SIG_SLIC, ACPI_SIG_SPCR, ACPI_SIG_SPMI, ACPI_SIG_TCPA,
+		ACPI_SIG_UEFI, ACPI_SIG_WAET, ACPI_SIG_WDAT, ACPI_SIG_WDDT,
+		ACPI_SIG_WDRT, ACPI_SIG_DSDT, ACPI_SIG_FADT, ACPI_SIG_PSDT,
+		ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT, NULL };
 
 	if (data == NULL || size == 0)
 		return;
 
+	if (is_phys) {
+		files = (struct file_pos *)__pa_symbol(acpi_initrd_files);
+		all_tables_size_p = (int *)__pa_symbol(&all_tables_size);
+	}
+
 	for (no = 0; no < ACPI_OVERRIDE_TABLES; no++) {
 		file = find_cpio_data(cpio_path, data, size, &offset);
 		if (!file.data)
@@ -595,9 +611,12 @@ void __init acpi_initrd_override_find(void *data, size_t size)
 		data += offset;
 		size -= offset;
 
-		if (file.size < sizeof(struct acpi_table_header))
-			INVALID_TABLE("Table smaller than ACPI header",
+		if (file.size < sizeof(struct acpi_table_header)) {
+			if (!is_phys)
+				INVALID_TABLE("Table smaller than ACPI header",
 				      cpio_path, file.name);
+			continue;
+		}
 
 		table = file.data;
 
@@ -605,22 +624,33 @@ void __init acpi_initrd_override_find(void *data, size_t size)
 			if (!memcmp(table->signature, table_sigs[sig], 4))
 				break;
 
-		if (!table_sigs[sig])
-			INVALID_TABLE("Unknown signature",
+		if (!table_sigs[sig]) {
+			if (!is_phys)
+				 INVALID_TABLE("Unknown signature",
 				      cpio_path, file.name);
-		if (file.size != table->length)
-			INVALID_TABLE("File length does not match table length",
+			continue;
+		}
+		if (file.size != table->length) {
+			if (!is_phys)
+				INVALID_TABLE("File length does not match table length",
 				      cpio_path, file.name);
-		if (acpi_table_checksum(file.data, table->length))
-			INVALID_TABLE("Bad table checksum",
+			continue;
+		}
+		if (acpi_table_checksum(file.data, table->length)) {
+			if (!is_phys)
+				INVALID_TABLE("Bad table checksum",
 				      cpio_path, file.name);
+			continue;
+		}
 
-		pr_info("%4.4s ACPI table found in initrd [%s%s][0x%x]\n",
+		if (!is_phys)
+			pr_info("%4.4s ACPI table found in initrd [%s%s][0x%x]\n",
 			table->signature, cpio_path, file.name, table->length);
 
-		all_tables_size += table->length;
-		acpi_initrd_files[table_nr].data = __pa_nodebug(file.data);
-		acpi_initrd_files[table_nr].size = file.size;
+		(*all_tables_size_p) += table->length;
+		files[table_nr].data = is_phys ? (phys_addr_t)file.data :
+						  __pa_nodebug(file.data);
+		files[table_nr].size = file.size;
 		table_nr++;
 	}
 }
@@ -670,6 +700,9 @@ void __init acpi_initrd_override_copy(void)
 			break;
 		q = early_ioremap(addr, size);
 		p = early_ioremap(acpi_tables_addr + total_offset, size);
+		pr_info("%4.4s ACPI table found in initrd [%#010llx-%#010llx]\n",
+				((struct acpi_table_header *)q)->signature,
+				(u64)addr, (u64)(addr + size - 1));
 		memcpy(p, q, size);
 		early_iounmap(q, size);
 		early_iounmap(p, size);
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 1654a241..4b943e6 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -478,10 +478,11 @@ static inline bool acpi_driver_match_device(struct device *dev,
 #endif	/* !CONFIG_ACPI */
 
 #ifdef CONFIG_ACPI_INITRD_TABLE_OVERRIDE
-void acpi_initrd_override_find(void *data, size_t size);
+void acpi_initrd_override_find(void *data, size_t size, bool is_phys);
 void acpi_initrd_override_copy(void);
 #else
-static inline void acpi_initrd_override_find(void *data, size_t size) { }
+static inline void acpi_initrd_override_find(void *data, size_t size,
+						 bool is_phys) { }
 static inline void acpi_initrd_override_copy(void) { }
 #endif
 
-- 
1.8.1.4


  parent reply	other threads:[~2013-04-12  0:58 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-12  0:55 [PATCH v4 00/22] x86, ACPI, numa: Parse numa info early Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 01/22] x86: Change get_ramdisk_image() to global Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 02/22] x86, microcode: Use common get_ramdisk_image() Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Yinghai Lu
2013-06-05  8:36   ` Tang Chen
2013-04-12  0:55 ` [PATCH v4 04/22] x86, ACPI: Search buffer above 4G in second try for acpi override tables Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 05/22] x86, ACPI: Increase override tables number limit Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 06/22] x86, ACPI: Split acpi_initrd_override to find/copy two functions Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Yinghai Lu
2013-04-12  0:55 ` Yinghai Lu [this message]
2013-04-12  0:55 ` [PATCH v4 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 10/22] x86, mm, numa: Move two functions calling on successful path later Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 11/22] x86, mm, numa: Call numa_meminfo_cover_memory() checking early Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 12/22] x86, mm, numa: Move node_map_pfn alignment() to x86 Yinghai Lu
2013-04-12  0:55 ` [PATCH v4 13/22] x86, mm, numa: Use numa_meminfo to check node_map_pfn alignment Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 14/22] x86, mm, numa: Set memblock nid later Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 15/22] x86, mm, numa: Move node_possible_map setting later Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 16/22] x86, mm, numa: Move emulation handling down Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 17/22] x86, ACPI, numa, ia64: split SLIT handling out Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 18/22] x86, mm, numa: Add early_initmem_init() stub Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 19/22] x86, mm: Parse numa info early Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 20/22] x86, mm: Add comments for step_size shift Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 21/22] x86, mm: Make init_mem_mapping be able to be called several times Yinghai Lu
2013-04-12  0:56 ` [PATCH v4 22/22] x86, mm, numa: Put pagetable on local node ram for 64bit Yinghai Lu
2013-04-26  8:58 ` [PATCH v4 00/22] x86, ACPI, numa: Parse numa info early Tang Chen
2013-04-30  7:21 ` Tang Chen
2013-05-06  9:49   ` Tang Chen
2013-05-09  8:54   ` Tang Chen
2013-05-09 18:24     ` Yinghai Lu
2013-05-13  2:59       ` Tang Chen
2013-05-14  9:06         ` Tang Chen
2013-05-22  5:14       ` Tang Chen
2013-05-22  5:18         ` H. Peter Anvin
2013-06-03  6:01           ` Tang Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1365728168-32067-9-git-send-email-yinghai@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=jacob.shin@amd.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=penberg@kernel.org \
    --cc=rjw@sisk.pl \
    --cc=tangchen@cn.fujitsu.com \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=trenn@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox