From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
Lee Jones <lee.jones@linaro.org>,
Yvan FILLION <yvan.fillion@stericsson.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] regulator: ab8500-ext: Don't update info->update_val if set_mode() fails
Date: Tue, 16 Apr 2013 23:29:12 +0800 [thread overview]
Message-ID: <1366126152.14735.2.camel@phoenix> (raw)
This ensures info->update_val status is still correct if set_mode() call fails.
Otherwise, get_mode() may return wrong status if a set_mode() call fails.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/ab8500-ext.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 20680f3..03faf9c 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -181,6 +181,7 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
{
int ret = 0;
struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 regval;
if (info == NULL) {
dev_err(rdev_get_dev(rdev), "regulator info null pointer\n");
@@ -189,23 +190,30 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
switch (mode) {
case REGULATOR_MODE_NORMAL:
- info->update_val = info->update_val_hp;
+ regval = info->update_val_hp;
break;
case REGULATOR_MODE_IDLE:
- info->update_val = info->update_val_lp;
+ regval = info->update_val_lp;
break;
default:
return -EINVAL;
}
- if (ab8500_ext_regulator_is_enabled(rdev)) {
- u8 regval;
-
- ret = enable(info, ®val);
- if (ret < 0)
+ /* If regulator is enabled and info->cfg->hwreq is set, the regulator
+ must be on in high power, so we don't need to write the register with
+ the same value.
+ */
+ if (ab8500_ext_regulator_is_enabled(rdev) &&
+ !(info->cfg && info->cfg->hwreq)) {
+ ret = abx500_mask_and_set_register_interruptible(info->dev,
+ info->update_bank, info->update_reg,
+ info->update_mask, regval);
+ if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"Could not set regulator mode.\n");
+ return ret;
+ }
dev_dbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
@@ -214,7 +222,9 @@ static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev,
info->update_mask, regval);
}
- return ret;
+ info->update_val = regval;
+
+ return 0;
}
static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev)
--
1.7.10.4
next reply other threads:[~2013-04-16 15:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-16 15:29 Axel Lin [this message]
2013-04-16 15:33 ` [PATCH v2 2/2] regulator: ab8500-ext: Remove enable() and disable() functions Axel Lin
2013-04-17 8:52 ` Bengt Jönsson
2013-04-17 8:51 ` [PATCH v2 1/2] regulator: ab8500-ext: Don't update info->update_val if set_mode() fails Bengt Jönsson
2013-04-17 14:10 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1366126152.14735.2.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=bengt.g.jonsson@stericsson.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yvan.fillion@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox