public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Graeme Gregory <gg@slimlogic.co.uk>,
	Liam Girdwood <lgirdwood@gmail.com>,
	linux-kernel@vger.kernel.org,
	Laxman Dewangan <ldewangan@nvidia.com>,
	AnilKumar Ch <anilkumar@ti.com>
Subject: [PATCH] regulator: tps65910: Convert to use regulator_map_voltage_ascend
Date: Sat, 20 Apr 2013 10:30:17 +0800	[thread overview]
Message-ID: <1366425017.8200.1.camel@phoenix> (raw)

All regulators have ascendant voltage list in this driver.
Some regulators have more than 200 supported voltages.
e.g.
For TPS65910_REG_VDD1 and TPS65910_REG_VDD2:
n_voltages = VDD1_2_NUM_VOLT_FINE * VDD1_2_NUM_VOLT_COARSE
           = 73 * 3
           = 219

Thus it worth converting to regulator_map_voltage_ascend rather than use
default regulator_map_voltage_iterate.

For consistent, convert all regulators to regulator_map_voltage_ascend.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/tps65910-regulator.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index 6ba6931..45c1644 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -748,6 +748,7 @@ static struct regulator_ops tps65910_ops_dcdc = {
 	.set_voltage_sel	= tps65910_set_voltage_dcdc_sel,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.list_voltage		= tps65910_list_voltage_dcdc,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops_vdd3 = {
@@ -758,6 +759,7 @@ static struct regulator_ops tps65910_ops_vdd3 = {
 	.get_mode		= tps65910_get_mode,
 	.get_voltage		= tps65910_get_voltage_vdd3,
 	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65910_ops = {
@@ -769,6 +771,7 @@ static struct regulator_ops tps65910_ops = {
 	.get_voltage_sel	= tps65910_get_voltage_sel,
 	.set_voltage_sel	= tps65910_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_table,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static struct regulator_ops tps65911_ops = {
@@ -780,6 +783,7 @@ static struct regulator_ops tps65911_ops = {
 	.get_voltage_sel	= tps65911_get_voltage_sel,
 	.set_voltage_sel	= tps65911_set_voltage_sel,
 	.list_voltage		= tps65911_list_voltage,
+	.map_voltage		= regulator_map_voltage_ascend,
 };
 
 static int tps65910_set_ext_sleep_config(struct tps65910_reg *pmic,
-- 
1.7.10.4




             reply	other threads:[~2013-04-20  2:30 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-04-20  2:30 Axel Lin [this message]
2013-04-23 10:41 ` [PATCH] regulator: tps65910: Convert to use regulator_map_voltage_ascend Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1366425017.8200.1.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=anilkumar@ti.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=gg@slimlogic.co.uk \
    --cc=ldewangan@nvidia.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox