From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/7] mfd: arizona: Read the device identification information after boot
Date: Tue, 21 May 2013 13:13:15 -0500 [thread overview]
Message-ID: <1369160001-4019-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20130521181230.GF1627@sirena.org.uk>
Future devices may not fully report the device identification information
until their boot sequence is complete so defer acting on these until that
has finished.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/arizona-core.c | 80 +++++++++++++++++++++++++++-----------------
1 file changed, 49 insertions(+), 31 deletions(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index 6ab0304..81907f9 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -536,51 +536,22 @@ int arizona_dev_init(struct arizona *arizona)
regcache_cache_only(arizona->regmap, false);
+ /* Verify that this is a chip we know about */
ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
if (ret != 0) {
dev_err(dev, "Failed to read ID register: %d\n", ret);
goto err_reset;
}
- ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
- &arizona->rev);
- if (ret != 0) {
- dev_err(dev, "Failed to read revision register: %d\n", ret);
- goto err_reset;
- }
- arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
-
switch (reg) {
-#ifdef CONFIG_MFD_WM5102
case 0x5102:
- type_name = "WM5102";
- if (arizona->type != WM5102) {
- dev_err(arizona->dev, "WM5102 registered as %d\n",
- arizona->type);
- arizona->type = WM5102;
- }
- apply_patch = wm5102_patch;
- arizona->rev &= 0x7;
- break;
-#endif
-#ifdef CONFIG_MFD_WM5110
case 0x5110:
- type_name = "WM5110";
- if (arizona->type != WM5110) {
- dev_err(arizona->dev, "WM5110 registered as %d\n",
- arizona->type);
- arizona->type = WM5110;
- }
- apply_patch = wm5110_patch;
break;
-#endif
default:
- dev_err(arizona->dev, "Unknown device ID %x\n", reg);
+ dev_err(arizona->dev, "Unknown device ID: %x\n", reg);
goto err_reset;
}
- dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
-
/* If we have a /RESET GPIO we'll already be reset */
if (!arizona->pdata.reset) {
regcache_mark_dirty(arizona->regmap);
@@ -600,6 +571,7 @@ int arizona_dev_init(struct arizona *arizona)
}
}
+ /* Ensure device startup is complete */
switch (arizona->type) {
case WM5102:
ret = regmap_read(arizona->regmap, 0x19, &val);
@@ -620,6 +592,52 @@ int arizona_dev_init(struct arizona *arizona)
break;
}
+ /* Read the device ID information & do device specific stuff */
+ ret = regmap_read(arizona->regmap, ARIZONA_SOFTWARE_RESET, ®);
+ if (ret != 0) {
+ dev_err(dev, "Failed to read ID register: %d\n", ret);
+ goto err_reset;
+ }
+
+ ret = regmap_read(arizona->regmap, ARIZONA_DEVICE_REVISION,
+ &arizona->rev);
+ if (ret != 0) {
+ dev_err(dev, "Failed to read revision register: %d\n", ret);
+ goto err_reset;
+ }
+ arizona->rev &= ARIZONA_DEVICE_REVISION_MASK;
+
+ switch (reg) {
+#ifdef CONFIG_MFD_WM5102
+ case 0x5102:
+ type_name = "WM5102";
+ if (arizona->type != WM5102) {
+ dev_err(arizona->dev, "WM5102 registered as %d\n",
+ arizona->type);
+ arizona->type = WM5102;
+ }
+ apply_patch = wm5102_patch;
+ arizona->rev &= 0x7;
+ break;
+#endif
+#ifdef CONFIG_MFD_WM5110
+ case 0x5110:
+ type_name = "WM5110";
+ if (arizona->type != WM5110) {
+ dev_err(arizona->dev, "WM5110 registered as %d\n",
+ arizona->type);
+ arizona->type = WM5110;
+ }
+ apply_patch = wm5110_patch;
+ break;
+#endif
+ default:
+ dev_err(arizona->dev, "Unknown device ID %x\n", reg);
+ goto err_reset;
+ }
+
+ dev_info(dev, "%s revision %c\n", type_name, arizona->rev + 'A');
+
if (apply_patch) {
ret = apply_patch(arizona);
if (ret != 0) {
--
1.7.10.4
next prev parent reply other threads:[~2013-05-21 18:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-21 18:12 [PATCH 0/7] mfd: arizona: Updates for v3.11 Mark Brown
2013-05-21 18:13 ` Mark Brown [this message]
2013-05-21 18:13 ` [PATCH 2/7] mfd: wm5102: Manually apply register patch Mark Brown
2013-05-21 18:13 ` [PATCH 3/7] mfd: arizona: Add missing cleanup on remove Mark Brown
2013-05-21 18:13 ` [PATCH 4/7] mfd: arizona: Disable interrupts during suspend Mark Brown
2013-05-21 18:13 ` [PATCH 5/7] mfd: Add device tree bindings for Arizona class devices Mark Brown
2013-05-21 18:13 ` [PATCH 6/7] mfd: arizona: Support use of external DCVDD Mark Brown
2013-05-21 18:13 ` [PATCH 7/7] mfd: arizona: Change fast_start pdata name to better reflect functionality Mark Brown
2013-05-24 22:07 ` [PATCH 0/7] mfd: arizona: Updates for v3.11 Samuel Ortiz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369160001-4019-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox