public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Vinod Koul <vinod.koul@intel.com>,
	linux-kernel@vger.kernel.org,
	spear-devel <spear-devel@list.st.com>,
	viresh.kumar@linaro.org, Arnd Bergmann <arnd@arndb.de>,
	Felipe Balbi <balbi@ti.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v1 4/4] dma: dw: add PCI part of the driver
Date: Tue,  4 Jun 2013 15:36:22 +0300	[thread overview]
Message-ID: <1370349382-20914-5-git-send-email-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <1370349382-20914-1-git-send-email-andriy.shevchenko@linux.intel.com>

This is the PCI part of the DesignWare DMAC driver. The controller is usually
used in the Intel hardware such as Intel Medfield.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/dma/dw/Kconfig  |   9 +++++
 drivers/dma/dw/Makefile |   3 ++
 drivers/dma/dw/pci.c    | 101 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 113 insertions(+)
 create mode 100644 drivers/dma/dw/pci.c

diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index efd9e02..db2b41f 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -15,6 +15,15 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller. This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
+config DW_DMAC_PCI
+	tristate "Synopsys DesignWare AHB DMA PCI driver"
+	depends on PCI
+	select DW_DMAC_CORE
+	help
+	  Support the Synopsys DesignWare AHB DMA controller on the
+	  platfroms that enumerate it as a PCI device. For example,
+	  Intel Medfield has integrated this GPDMA controller.
+
 config DW_DMAC_BIG_ENDIAN_IO
 	bool "Use big endian I/O register access"
 	default y if AVR32
diff --git a/drivers/dma/dw/Makefile b/drivers/dma/dw/Makefile
index 47f3674..3eebd1c 100644
--- a/drivers/dma/dw/Makefile
+++ b/drivers/dma/dw/Makefile
@@ -3,3 +3,6 @@ dw_dmac_core-objs	:= core.o
 
 obj-$(CONFIG_DW_DMAC)		+= dw_dmac.o
 dw_dmac-objs		:= platform.o
+
+obj-$(CONFIG_DW_DMAC_PCI)	+= dw_dmac_pci.o
+dw_dmac_pci-objs	:= pci.o
diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c
new file mode 100644
index 0000000..e972c5dd
--- /dev/null
+++ b/drivers/dma/dw/pci.c
@@ -0,0 +1,101 @@
+/*
+ * PCI driver for the Synopsys DesignWare DMA Controller
+ *
+ * Copyright (C) 2013 Intel Corporation
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+
+#include "internal.h"
+
+static struct dw_dma_platform_data dw_pci_pdata = {
+	.is_private = 1,
+	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+	.chan_priority = CHAN_PRIORITY_ASCENDING,
+};
+
+static int dw_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+	struct dw_dma_chip *chip;
+	struct dw_dma_platform_data *pdata = (void *)pid->driver_data;
+	int ret;
+
+	ret = pcim_enable_device(pdev);
+	if (ret)
+		return ret;
+
+	ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
+	if (ret) {
+		dev_err(&pdev->dev, "I/O memory remapping failed\n");
+		return ret;
+	}
+
+	pci_set_master(pdev);
+	pci_try_set_mwi(pdev);
+
+	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &pdev->dev;
+	chip->regs = pcim_iomap_table(pdev)[0];
+	chip->irq = pdev->irq;
+
+	ret = dw_dma_probe(chip, pdata);
+	if (ret)
+		return ret;
+
+	pci_set_drvdata(pdev, chip);
+
+	return 0;
+}
+
+static void dw_pci_remove(struct pci_dev *pdev)
+{
+	struct dw_dma_chip *chip = pci_get_drvdata(pdev);
+	int ret;
+
+	ret = dw_dma_remove(chip);
+	if (ret)
+		dev_warn(&pdev->dev, "can't remove device properly: %d\n", ret);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(dw_pci_id_table) = {
+	/* Medfield */
+	{ PCI_VDEVICE(INTEL, 0x0827), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0830), (kernel_ulong_t)&dw_pci_pdata },
+
+	/* BayTrail */
+	{ PCI_VDEVICE(INTEL, 0x0f06), (kernel_ulong_t)&dw_pci_pdata },
+	{ PCI_VDEVICE(INTEL, 0x0f40), (kernel_ulong_t)&dw_pci_pdata },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, dw_pci_id_table);
+
+static struct pci_driver dw_pci_driver = {
+	.name		= "dw_dmac_pci",
+	.id_table	= dw_pci_id_table,
+	.probe		= dw_pci_probe,
+	.remove		= dw_pci_remove,
+};
+
+module_pci_driver(dw_pci_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Synopsys DesignWare DMAC PCI driver");
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
-- 
1.8.2.rc0.22.gb3600c3


  parent reply	other threads:[~2013-06-04 12:36 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-06-04 12:36 [PATCH v1 0/4] dw_dmac: move to own folder and split Andy Shevchenko
2013-06-04 12:36 ` [PATCH v1 1/4] dw_dmac: don't check resource with devm_ioremap_resource Andy Shevchenko
2013-06-04 12:36 ` [PATCH v1 2/4] dma: move dw_dmac driver to an own directory Andy Shevchenko
2013-06-04 12:36 ` [PATCH v1 3/4] dma: dw: split driver to library part and platform code Andy Shevchenko
2013-06-04 13:00   ` Arnd Bergmann
2013-06-05  8:45   ` Viresh Kumar
2013-06-04 12:36 ` Andy Shevchenko [this message]
2013-06-05  9:41   ` [PATCH v1 4/4] dma: dw: add PCI part of the driver Viresh Kumar
2013-06-04 13:01 ` [PATCH v1 0/4] dw_dmac: move to own folder and split Arnd Bergmann
2013-06-04 13:43   ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1370349382-20914-5-git-send-email-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=balbi@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=spear-devel@list.st.com \
    --cc=vinod.koul@intel.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox