linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: <linux-kernel@vger.kernel.org>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
	Vineet Gupta <vgupta@synopsys.com>
Subject: [PATCH 10/32] arc: delete __cpuinit usage from all arc files
Date: Mon, 24 Jun 2013 15:30:15 -0400	[thread overview]
Message-ID: <1372102237-8757-11-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1372102237-8757-1-git-send-email-paul.gortmaker@windriver.com>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/arc uses of the __cpuinit macros from
all C files.  Currently arc does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---

[This commit is part of the __cpuinit removal work.  If you don't see
 any problems with it, then you don't have to do anything ; it will be
 submitted with all the rest of the __cpuinit removal work.  On the
 other hand, if you want to carry this patch in with your other pending
 changes so as to handle conflicts with other pending work yourself, then
 that is fine too, as the commits can largely be treated independently.
 For more information, please see: https://lkml.org/lkml/2013/6/20/513 ]

 arch/arc/include/asm/irq.h |  2 +-
 arch/arc/kernel/irq.c      |  2 +-
 arch/arc/kernel/setup.c    | 10 +++++-----
 arch/arc/kernel/smp.c      |  4 ++--
 arch/arc/kernel/time.c     |  6 +++---
 arch/arc/mm/cache_arc700.c |  4 ++--
 arch/arc/mm/tlb.c          |  4 ++--
 7 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h
index 57898a1..c0a7210 100644
--- a/arch/arc/include/asm/irq.h
+++ b/arch/arc/include/asm/irq.h
@@ -21,6 +21,6 @@
 extern void __init arc_init_IRQ(void);
 extern int __init get_hw_config_num_irq(void);
 
-void __cpuinit arc_local_timer_setup(unsigned int cpu);
+void arc_local_timer_setup(unsigned int cpu);
 
 #endif
diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c
index 4918a66..305b3f8 100644
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -28,7 +28,7 @@
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
-void __cpuinit arc_init_IRQ(void)
+void arc_init_IRQ(void)
 {
 	int level_mask = 0;
 
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 5b6ee41..6b08345 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -31,14 +31,14 @@
 int running_on_hw = 1;	/* vs. on ISS */
 
 char __initdata command_line[COMMAND_LINE_SIZE];
-struct machine_desc *machine_desc __cpuinitdata;
+struct machine_desc *machine_desc;
 
 struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
 
-void __cpuinit read_arc_build_cfg_regs(void)
+void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -237,7 +237,7 @@ char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __cpuinit arc_chk_ccms(void)
+void arc_chk_ccms(void)
 {
 #if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
@@ -272,7 +272,7 @@ void __cpuinit arc_chk_ccms(void)
  * hardware has dedicated regs which need to be saved/restored on ctx-sw
  * (Single Precision uses core regs), thus kernel is kind of oblivious to it
  */
-void __cpuinit arc_chk_fpu(void)
+void arc_chk_fpu(void)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 
@@ -293,7 +293,7 @@ void __cpuinit arc_chk_fpu(void)
  *    such as only for boot CPU etc
  */
 
-void __cpuinit setup_processor(void)
+void setup_processor(void)
 {
 	char str[512];
 	int cpu_id = smp_processor_id();
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index 5c7fd60..bca3052 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -117,7 +117,7 @@ const char *arc_platform_smp_cpuinfo(void)
  * Called from asm stub in head.S
  * "current"/R25 already setup by low level boot code
  */
-void __cpuinit start_kernel_secondary(void)
+void start_kernel_secondary(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu = smp_processor_id();
@@ -154,7 +154,7 @@ void __cpuinit start_kernel_secondary(void)
  *
  * Essential requirements being where to run from (PC) and stack (SP)
 */
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned long wait_till;
 
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 32afa54..0e51e69 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -61,7 +61,7 @@
 
 #ifdef CONFIG_ARC_HAS_RTSC
 
-int __cpuinit arc_counter_setup(void)
+int arc_counter_setup(void)
 {
 	/* RTSC insn taps into cpu clk, needs no setup */
 
@@ -116,7 +116,7 @@ static bool is_usable_as_clocksource(void)
 /*
  * set 32bit TIMER1 to keep counting monotonically and wraparound
  */
-int __cpuinit arc_counter_setup(void)
+int arc_counter_setup(void)
 {
 	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
 	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
@@ -223,7 +223,7 @@ static struct irqaction arc_timer_irq = {
  * Setup the local event timer for @cpu
  * N.B. weak so that some exotic ARC SoCs can completely override it
  */
-void __attribute__((weak)) __cpuinit arc_local_timer_setup(unsigned int cpu)
+void __attribute__((weak)) arc_local_timer_setup(unsigned int cpu)
 {
 	struct clock_event_device *clk = &per_cpu(arc_clockevent_device, cpu);
 
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index 66c75ee..f415d85 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -129,7 +129,7 @@ char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len)
  * the cpuinfo structure for later use.
  * No Validation done here, simply read/convert the BCRs
  */
-void __cpuinit read_decode_cache_bcr(void)
+void read_decode_cache_bcr(void)
 {
 	struct cpuinfo_arc_cache *p_ic, *p_dc;
 	unsigned int cpu = smp_processor_id();
@@ -167,7 +167,7 @@ void __cpuinit read_decode_cache_bcr(void)
  * 3. Enable the Caches, setup default flush mode for D-Cache
  * 3. Calculate the SHMLBA used by user space
  */
-void __cpuinit arc_cache_init(void)
+void arc_cache_init(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index d44ae33..7957dc4 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -469,7 +469,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long vaddr_unaligned,
  * the cpuinfo structure for later use.
  * No Validation is done here, simply read/convert the BCRs
  */
-void __cpuinit read_decode_mmu_bcr(void)
+void read_decode_mmu_bcr(void)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
 	unsigned int tmp;
@@ -530,7 +530,7 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 	return buf;
 }
 
-void __cpuinit arc_mmu_init(void)
+void arc_mmu_init(void)
 {
 	char str[256];
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-- 
1.8.1.2


  parent reply	other threads:[~2013-06-24 19:40 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1372102237-8757-1-git-send-email-paul.gortmaker@windriver.com>
2013-06-24 19:30 ` [PATCH 01/32] init.h: remove __cpuinit sections from the kernel Paul Gortmaker
2013-06-24 19:51   ` Joe Perches
2013-06-24 22:10     ` Joe Perches
2013-06-24 19:30 ` [PATCH 02/32] modpost: remove all traces of cpuinit/cpuexit sections Paul Gortmaker
2013-06-24 19:30 ` [PATCH 03/32] alpha: delete __cpuinit usage from all users Paul Gortmaker
2013-06-24 19:30 ` [PATCH 04/32] powerpc: " Paul Gortmaker
2013-06-24 19:30 ` [PATCH 05/32] parisc: " Paul Gortmaker
2013-06-24 19:30 ` [PATCH 06/32] ia64: delete __cpuinit usage from all ia64 users Paul Gortmaker
2013-06-24 19:30 ` [PATCH 07/32] arm: delete __cpuinit/__CPUINIT usage from all ARM users Paul Gortmaker
2013-07-02  8:52   ` Joseph Lo
2013-07-02  8:58     ` Russell King - ARM Linux
2013-07-02 17:53       ` Paul Gortmaker
2013-06-24 19:30 ` [PATCH 08/32] sparc: delete __cpuinit/__CPUINIT usage from all users Paul Gortmaker
2013-06-24 19:30 ` [PATCH 09/32] arm64: delete __cpuinit " Paul Gortmaker
2013-06-25  8:45   ` Catalin Marinas
2013-06-24 19:30 ` Paul Gortmaker [this message]
2013-06-25  4:37   ` [PATCH 10/32] arc: delete __cpuinit usage from all arc files Vineet Gupta
2013-06-24 19:30 ` [PATCH 11/32] blackfin: delete __cpuinit usage from all blackfin files Paul Gortmaker
2013-06-24 22:40   ` Mike Frysinger
2013-06-24 19:30 ` [PATCH 12/32] s390: delete __cpuinit usage from all s390 files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 13/32] sh: delete __cpuinit usage from all sh files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 14/32] tile: delete __cpuinit usage from all tile files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 15/32] metag: delete __cpuinit usage from all metag files Paul Gortmaker
2013-06-25 15:10   ` James Hogan
2013-06-24 19:30 ` [PATCH 16/32] cris: delete __cpuinit usage from all cris files Paul Gortmaker
2013-06-25 10:42   ` Jesper Nilsson
2013-06-24 19:30 ` [PATCH 17/32] frv: delete __cpuinit usage from all frv files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 18/32] hexagon: delete __cpuinit usage from all hexagon files Paul Gortmaker
2013-07-08 17:01   ` Richard Kuo
2013-06-24 19:30 ` [PATCH 19/32] m32r: delete __cpuinit usage from all m32r files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 20/32] openrisc: delete __cpuinit usage from all openrisc files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 21/32] xtensa: delete __cpuinit usage from all xtensa files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 22/32] score: delete __cpuinit usage from all score files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 23/32] x86: delete __cpuinit usage from all x86 files Paul Gortmaker
2013-06-24 19:37   ` Ingo Molnar
2013-06-24 19:57   ` Thomas Gleixner
2013-06-24 23:12   ` H. Peter Anvin
2013-06-25  2:16     ` Paul Gortmaker
2013-06-24 19:30 ` [PATCH 24/32] clocksource+irqchip: delete __cpuinit usage from all related files Paul Gortmaker
2013-06-24 19:56   ` Thomas Gleixner
2013-06-24 19:30 ` [PATCH 25/32] cpufreq: delete __cpuinit usage from all cpufreq files Paul Gortmaker
2013-06-24 22:42   ` Dirk Brandewie
2013-06-25  3:31   ` Viresh Kumar
2013-06-25  4:15     ` Joe Perches
2013-06-25  6:44       ` Viresh Kumar
2013-06-25  6:59         ` Joe Perches
2013-06-25  7:01           ` Viresh Kumar
2013-06-25 14:30     ` Paul Gortmaker
2013-06-24 19:30 ` [PATCH 26/32] hwmon: delete __cpuinit usage from all hwmon files Paul Gortmaker
2013-06-24 20:11   ` [lm-sensors] " Guenter Roeck
2013-06-24 19:30 ` [PATCH 27/32] acpi: delete __cpuinit usage from all acpi files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 28/32] net: delete __cpuinit usage from all net files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 29/32] rcu: delete __cpuinit usage from all rcu files Paul Gortmaker
2013-06-25  1:10   ` Josh Triplett
2013-06-25 19:32     ` Paul E. McKenney
2013-06-24 19:30 ` [PATCH 30/32] kernel: delete __cpuinit usage from all core kernel files Paul Gortmaker
2013-06-24 19:30 ` [PATCH 31/32] drivers: delete __cpuinit usage from all remaining drivers files Paul Gortmaker
2013-06-24 20:33   ` Greg Kroah-Hartman
2013-06-24 19:30 ` [PATCH 32/32] block: delete __cpuinit usage from all block files Paul Gortmaker
2013-06-24 20:00 ` [PATCH-next 00/32] Delete support for __cpuinit Paul Gortmaker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1372102237-8757-11-git-send-email-paul.gortmaker@windriver.com \
    --to=paul.gortmaker@windriver.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vgupta@synopsys.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).