public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: linux-ia64@vger.kernel.org, Tony Luck <tony.luck@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [RFT PATCH] ia64: generic_defconfig: convert to use libata PATA drivers
Date: Mon, 17 Aug 2015 18:31:03 +0200	[thread overview]
Message-ID: <13721070.NVYmjefytC@amdc1976> (raw)
In-Reply-To: <55D2097A.7090203@cogentembedded.com>


Hi,

On Monday, August 17, 2015 07:19:06 PM Sergei Shtylyov wrote:
> Hello.
> 
> On 08/17/2015 06:46 PM, Bartlomiej Zolnierkiewicz wrote:
> 
> > IDE subsystem has been deprecated since 2009 and the majority
> > (if not all) of Linux distributions have switched to use
> > libata for ATA support exclusively.  However there are still
> > some users (mostly old or/and embedded non-x86 systems) that
> > have not converted from using IDE subsystem to libata PATA
> > drivers.  This doesn't seem to be good thing in the long-term
> > for Linux as while there is less and less PATA systems left
> > in use:
> >
> > * testing efforts are divided between two subsystems
> >
> > * having duplicate drivers for same hardware confuses users
> >
> > This patch converts generic_defconfig to use libata PATA
> > drivers (sgiioc4 IDE host driver has no corresponding libata
> > driver yet so it is not converted).
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > ---
> > Build tested only.
> > If you have affected hardware please test.  Thank you.
> >
> >   arch/ia64/configs/generic_defconfig | 8 ++++----
> >   1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
> > index 81f686d..f55be82 100644
> > --- a/arch/ia64/configs/generic_defconfig
> > +++ b/arch/ia64/configs/generic_defconfig
> [...]
> > @@ -62,6 +59,9 @@ CONFIG_SCSI_QLOGIC_1280=y
> >   CONFIG_ATA=y
> >   CONFIG_ATA_PIIX=y
> >   CONFIG_SATA_VITESSE=y
> > +CONFIG_PATA_CMD64X=y
> > +CONFIG_PATA_MPIIX=y
> 
>     If you're enabling the MPIIX support (which I doubt is necessary), why not 

I also doubt that it is necessary but IDE's piix host driver
includes support for it (so after conversion MPIIX is also
enabled).

> enable the "old" PIIX support?

Oversight on my side, will fix.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


  reply	other threads:[~2015-08-17 16:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-17 15:46 [RFT PATCH] ia64: bigsur_defconfig: convert to use libata PATA drivers Bartlomiej Zolnierkiewicz
2015-08-17 15:46 ` [RFT PATCH] ia64: generic_defconfig: " Bartlomiej Zolnierkiewicz
2015-08-17 16:19   ` Sergei Shtylyov
2015-08-17 16:31     ` Bartlomiej Zolnierkiewicz [this message]
2015-08-17 17:26       ` Sergei Shtylyov
2015-08-17 15:46 ` [RFT PATCH] ia64: gensparse_defconfig: " Bartlomiej Zolnierkiewicz
2015-08-17 15:46 ` [RFT PATCH] ia64: tiger_defconfig: " Bartlomiej Zolnierkiewicz
2015-08-17 15:46 ` [RFT PATCH] ia64: zx1_defconfig: " Bartlomiej Zolnierkiewicz
2015-08-17 19:27   ` Émeric MASCHINO
2015-08-17 20:41     ` Luck, Tony
2015-08-18 22:45       ` Émeric MASCHINO

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=13721070.NVYmjefytC@amdc1976 \
    --to=b.zolnierkie@samsung.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-ia64@vger.kernel.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox