From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: mingo@elte.hu, laijs@cn.fujitsu.com, dipankar@in.ibm.com,
akpm@linux-foundation.org, mathieu.desnoyers@polymtl.ca,
josh@joshtriplett.org, niv@us.ibm.com, tglx@linutronix.de,
peterz@infradead.org, rostedt@goodmis.org, dhowells@redhat.com,
edumazet@google.com, darren@dvhart.com, fweisbec@gmail.com,
sbw@mit.edu, "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Subject: [PATCH RFC nohz_full 2/7] nohz_full: Add rcu_dyntick data for scalable detection of all-idle state
Date: Mon, 8 Jul 2013 18:30:01 -0700 [thread overview]
Message-ID: <1373333406-26979-2-git-send-email-paulmck@linux.vnet.ibm.com> (raw)
In-Reply-To: <1373333406-26979-1-git-send-email-paulmck@linux.vnet.ibm.com>
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
This commit adds fields to the rcu_dyntick structure that are used to
detect idle CPUs. These new fields differ from the existing ones in
that the existing ones consider a CPU executing in user mode to be idle,
where the new ones consider CPUs executing in user mode to be busy.
The handling of these new fields is otherwise quite similar to that for
the exiting fields. This commit also adds the initialization required
for these fields.
So, why is usermode execution treated differently, with RCU considering
it a quiescent state equivalent to idle, while in contrast the new
full-system idle state detection considers usermode execution to be
non-idle?
It turns out that although one of RCU's quiescent states is usermode
execution, it is not a full-system idle state. This is because the
purpose of the full-system idle state is not RCU, but rather determining
when accurate timekeeping can safely be disabled. Whenever accurate
timekeeping is required in a CONFIG_NO_HZ_FULL kernel, at least one
CPU must keep the scheduling-clock tick going. If even one CPU is
executing in user mode, accurate timekeeping is requires, particularly for
architectures where gettimeofday() and friends do not enter the kernel.
Only when all CPUs are really and truly idle can accurate timekeeping be
disabled, allowing all CPUs to turn off the scheduling clock interrupt,
thus greatly improving energy efficiency.
This naturally raises the question "Why is this code in RCU rather than in
timekeeping?", and the answer is that RCU has the data and infrastructure
to efficiently make this determination.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
---
kernel/rcutree.c | 5 +++++
kernel/rcutree.h | 9 +++++++++
kernel/rcutree_plugin.h | 19 +++++++++++++++++++
3 files changed, 33 insertions(+)
diff --git a/kernel/rcutree.c b/kernel/rcutree.c
index 78745ae..259e300 100644
--- a/kernel/rcutree.c
+++ b/kernel/rcutree.c
@@ -209,6 +209,10 @@ EXPORT_SYMBOL_GPL(rcu_note_context_switch);
DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = {
.dynticks_nesting = DYNTICK_TASK_EXIT_IDLE,
.dynticks = ATOMIC_INIT(1),
+#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
+ .dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE,
+ .dynticks_idle = ATOMIC_INIT(1),
+#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
};
static long blimit = 10; /* Maximum callbacks per rcu_do_batch. */
@@ -2902,6 +2906,7 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible)
rdp->blimit = blimit;
init_callback_list(rdp); /* Re-enable callbacks on this CPU. */
rdp->dynticks->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
+ rcu_sysidle_init_percpu_data(rdp->dynticks);
atomic_set(&rdp->dynticks->dynticks,
(atomic_read(&rdp->dynticks->dynticks) & ~0x1) + 1);
raw_spin_unlock(&rnp->lock); /* irqs remain disabled. */
diff --git a/kernel/rcutree.h b/kernel/rcutree.h
index b383258..bd99d59 100644
--- a/kernel/rcutree.h
+++ b/kernel/rcutree.h
@@ -88,6 +88,14 @@ struct rcu_dynticks {
/* Process level is worth LLONG_MAX/2. */
int dynticks_nmi_nesting; /* Track NMI nesting level. */
atomic_t dynticks; /* Even value for idle, else odd. */
+#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
+ long long dynticks_idle_nesting;
+ /* irq/process nesting level from idle. */
+ atomic_t dynticks_idle; /* Even value for idle, else odd. */
+ /* "Idle" excludes userspace execution. */
+ unsigned long dynticks_idle_jiffies;
+ /* End of last non-NMI non-idle period. */
+#endif /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
#ifdef CONFIG_RCU_FAST_NO_HZ
bool all_lazy; /* Are all CPU's CBs lazy? */
unsigned long nonlazy_posted;
@@ -545,6 +553,7 @@ static void rcu_boot_init_nocb_percpu_data(struct rcu_data *rdp);
static void rcu_spawn_nocb_kthreads(struct rcu_state *rsp);
static void rcu_kick_nohz_cpu(int cpu);
static bool init_nocb_callback_list(struct rcu_data *rdp);
+static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp);
#endif /* #ifndef RCU_TREE_NONCORE */
diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h
index 769e12e..6937eb6 100644
--- a/kernel/rcutree_plugin.h
+++ b/kernel/rcutree_plugin.h
@@ -2375,3 +2375,22 @@ static void rcu_kick_nohz_cpu(int cpu)
smp_send_reschedule(cpu);
#endif /* #ifdef CONFIG_NO_HZ_FULL */
}
+
+
+#ifdef CONFIG_NO_HZ_FULL_SYSIDLE
+
+/*
+ * Initialize dynticks sysidle state for CPUs coming online.
+ */
+static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
+{
+ rdtp->dynticks_idle_nesting = DYNTICK_TASK_NEST_VALUE;
+}
+
+#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
+
+static void rcu_sysidle_init_percpu_data(struct rcu_dynticks *rdtp)
+{
+}
+
+#endif /* #else #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
--
1.8.1.5
next prev parent reply other threads:[~2013-07-09 4:13 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-09 1:29 [PATCH RFC nohz_full 0/7] v3 Provide infrastructure for full-system idle Paul E. McKenney
2013-07-09 1:30 ` [PATCH RFC nohz_full 1/7] nohz_full: Add Kconfig parameter for scalable detection of all-idle state Paul E. McKenney
2013-07-09 1:30 ` Paul E. McKenney [this message]
2013-07-09 9:37 ` [PATCH RFC nohz_full 2/7] nohz_full: Add rcu_dyntick data " Peter Zijlstra
2013-07-09 13:23 ` Paul E. McKenney
2013-07-09 1:30 ` [PATCH RFC nohz_full 3/7] nohz_full: Add per-CPU idle-state tracking Paul E. McKenney
2013-07-09 1:30 ` [PATCH RFC nohz_full 4/7] nohz_full: Add full-system idle states and variables Paul E. McKenney
2013-07-09 1:30 ` [PATCH RFC nohz_full 5/7] nohz_full: Add full-system-idle arguments to API Paul E. McKenney
2013-07-09 1:30 ` [PATCH RFC nohz_full 6/7] nohz_full: Add full-system-idle state machine Paul E. McKenney
2013-07-17 23:31 ` Frederic Weisbecker
2013-07-18 0:41 ` Paul E. McKenney
2013-07-18 1:33 ` Frederic Weisbecker
2013-07-18 3:39 ` Paul E. McKenney
2013-07-18 14:24 ` Frederic Weisbecker
2013-07-18 16:47 ` Paul E. McKenney
2013-07-18 22:46 ` Frederic Weisbecker
2013-07-19 0:24 ` Paul E. McKenney
2013-07-19 2:12 ` Frederic Weisbecker
2013-07-19 5:06 ` Paul E. McKenney
2013-07-24 18:09 ` Frederic Weisbecker
2013-07-24 22:09 ` Paul E. McKenney
2013-07-24 23:26 ` Frederic Weisbecker
2013-07-26 22:52 ` Paul E. McKenney
2013-07-27 18:13 ` Frederic Weisbecker
2013-07-09 1:30 ` [PATCH RFC nohz_full 7/7] nohz_full: Force RCU's grace-period kthreads onto timekeeping CPU Paul E. McKenney
-- strict thread matches above, loose matches on Subject: below --
2013-07-26 23:18 [PATCH RFC nohz_full 0/7] v4 Provide infrastructure for full-system idle Paul E. McKenney
2013-07-26 23:19 ` [PATCH RFC nohz_full 1/7] nohz_full: Add Kconfig parameter for scalable detection of all-idle state Paul E. McKenney
2013-07-26 23:19 ` [PATCH RFC nohz_full 2/7] nohz_full: Add rcu_dyntick data " Paul E. McKenney
2013-08-05 1:26 ` Frederic Weisbecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373333406-26979-2-git-send-email-paulmck@linux.vnet.ibm.com \
--to=paulmck@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=darren@dvhart.com \
--cc=dhowells@redhat.com \
--cc=dipankar@in.ibm.com \
--cc=edumazet@google.com \
--cc=fweisbec@gmail.com \
--cc=josh@joshtriplett.org \
--cc=laijs@cn.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu.desnoyers@polymtl.ca \
--cc=mingo@elte.hu \
--cc=niv@us.ibm.com \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=sbw@mit.edu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).