From: Peng Tao <bergwolf@gmail.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org, Peng Tao <tao.peng@emc.com>,
Jiang Liu <jiang.liu@huawei.com>,
Andreas Dilger <andreas.dilger@intel.com>
Subject: [PATCH-v2 01/17] staging/lustre: replace num_physpages with totalram_pages
Date: Mon, 15 Jul 2013 21:07:59 +0800 [thread overview]
Message-ID: <1373893695-4094-2-git-send-email-bergwolf@gmail.com> (raw)
In-Reply-To: <1373893695-4094-1-git-send-email-bergwolf@gmail.com>
From: Peng Tao <tao.peng@emc.com>
The global variable num_physpages is going away. Replace it
with totalram_pages.
Cc: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
---
.../lustre/include/linux/libcfs/linux/linux-mem.h | 4 ++--
drivers/staging/lustre/lustre/ldlm/ldlm_lib.c | 10 +++++-----
.../lustre/lustre/libcfs/linux/linux-tracefile.c | 2 +-
drivers/staging/lustre/lustre/llite/lproc_llite.c | 8 ++++----
drivers/staging/lustre/lustre/obdclass/class_obd.c | 6 +++---
.../lustre/lustre/obdclass/linux/linux-sysctl.c | 6 +++---
drivers/staging/lustre/lustre/obdclass/lu_object.c | 2 +-
drivers/staging/lustre/lustre/osc/lproc_osc.c | 2 +-
.../staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c | 2 +-
drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c | 4 ++--
10 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h b/drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h
index 042a2bc..63efb7b 100644
--- a/drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h
+++ b/drivers/staging/lustre/include/linux/libcfs/linux/linux-mem.h
@@ -63,9 +63,9 @@
#if BITS_PER_LONG == 32
/* limit to lowmem on 32-bit systems */
#define NUM_CACHEPAGES \
- min(num_physpages, 1UL << (30 - PAGE_CACHE_SHIFT) * 3 / 4)
+ min(totalram_pages, 1UL << (30 - PAGE_CACHE_SHIFT) * 3 / 4)
#else
-#define NUM_CACHEPAGES num_physpages
+#define NUM_CACHEPAGES totalram_pages
#endif
/*
diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c b/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
index 42df530..aace534 100644
--- a/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
+++ b/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
@@ -339,8 +339,8 @@ int client_obd_setup(struct obd_device *obddev, struct lustre_cfg *lcfg)
cli->cl_avail_grant = 0;
/* FIXME: Should limit this for the sum of all cl_dirty_max. */
cli->cl_dirty_max = OSC_MAX_DIRTY_DEFAULT * 1024 * 1024;
- if (cli->cl_dirty_max >> PAGE_CACHE_SHIFT > num_physpages / 8)
- cli->cl_dirty_max = num_physpages << (PAGE_CACHE_SHIFT - 3);
+ if (cli->cl_dirty_max >> PAGE_CACHE_SHIFT > totalram_pages / 8)
+ cli->cl_dirty_max = totalram_pages << (PAGE_CACHE_SHIFT - 3);
INIT_LIST_HEAD(&cli->cl_cache_waiters);
INIT_LIST_HEAD(&cli->cl_loi_ready_list);
INIT_LIST_HEAD(&cli->cl_loi_hp_ready_list);
@@ -388,11 +388,11 @@ int client_obd_setup(struct obd_device *obddev, struct lustre_cfg *lcfg)
if (!strcmp(name, LUSTRE_MDC_NAME)) {
cli->cl_max_rpcs_in_flight = MDC_MAX_RIF_DEFAULT;
- } else if (num_physpages >> (20 - PAGE_CACHE_SHIFT) <= 128 /* MB */) {
+ } else if (totalram_pages >> (20 - PAGE_CACHE_SHIFT) <= 128 /* MB */) {
cli->cl_max_rpcs_in_flight = 2;
- } else if (num_physpages >> (20 - PAGE_CACHE_SHIFT) <= 256 /* MB */) {
+ } else if (totalram_pages >> (20 - PAGE_CACHE_SHIFT) <= 256 /* MB */) {
cli->cl_max_rpcs_in_flight = 3;
- } else if (num_physpages >> (20 - PAGE_CACHE_SHIFT) <= 512 /* MB */) {
+ } else if (totalram_pages >> (20 - PAGE_CACHE_SHIFT) <= 512 /* MB */) {
cli->cl_max_rpcs_in_flight = 4;
} else {
if (osc_on_mdt(obddev->obd_name))
diff --git a/drivers/staging/lustre/lustre/libcfs/linux/linux-tracefile.c b/drivers/staging/lustre/lustre/libcfs/linux/linux-tracefile.c
index 6f56343..a500a0b 100644
--- a/drivers/staging/lustre/lustre/libcfs/linux/linux-tracefile.c
+++ b/drivers/staging/lustre/lustre/libcfs/linux/linux-tracefile.c
@@ -269,7 +269,7 @@ void cfs_print_to_console(struct ptldebug_header *hdr, int mask,
int cfs_trace_max_debug_mb(void)
{
- int total_mb = (num_physpages >> (20 - PAGE_SHIFT));
+ int total_mb = (totalram_pages >> (20 - PAGE_SHIFT));
return MAX(512, (total_mb * 80)/100);
}
diff --git a/drivers/staging/lustre/lustre/llite/lproc_llite.c b/drivers/staging/lustre/lustre/llite/lproc_llite.c
index 6a82505..a30c411 100644
--- a/drivers/staging/lustre/lustre/llite/lproc_llite.c
+++ b/drivers/staging/lustre/lustre/llite/lproc_llite.c
@@ -243,9 +243,9 @@ static ssize_t ll_max_readahead_mb_seq_write(struct file *file, const char *buff
if (rc)
return rc;
- if (pages_number < 0 || pages_number > num_physpages / 2) {
+ if (pages_number < 0 || pages_number > totalram_pages / 2) {
CERROR("can't set file readahead more than %lu MB\n",
- num_physpages >> (20 - PAGE_CACHE_SHIFT + 1)); /*1/2 of RAM*/
+ totalram_pages >> (20 - PAGE_CACHE_SHIFT + 1)); /*1/2 of RAM*/
return -ERANGE;
}
@@ -388,10 +388,10 @@ static ssize_t ll_max_cached_mb_seq_write(struct file *file, const char *buffer,
if (rc)
RETURN(rc);
- if (pages_number < 0 || pages_number > num_physpages) {
+ if (pages_number < 0 || pages_number > totalram_pages) {
CERROR("%s: can't set max cache more than %lu MB\n",
ll_get_fsname(sb, NULL, 0),
- num_physpages >> (20 - PAGE_CACHE_SHIFT));
+ totalram_pages >> (20 - PAGE_CACHE_SHIFT));
RETURN(-ERANGE);
}
diff --git a/drivers/staging/lustre/lustre/obdclass/class_obd.c b/drivers/staging/lustre/lustre/obdclass/class_obd.c
index af1c2d0..0715cf2 100644
--- a/drivers/staging/lustre/lustre/obdclass/class_obd.c
+++ b/drivers/staging/lustre/lustre/obdclass/class_obd.c
@@ -558,10 +558,10 @@ static int __init init_obdclass(void)
/* Default the dirty page cache cap to 1/2 of system memory.
* For clients with less memory, a larger fraction is needed
* for other purposes (mostly for BGL). */
- if (num_physpages <= 512 << (20 - PAGE_CACHE_SHIFT))
- obd_max_dirty_pages = num_physpages / 4;
+ if (totalram_pages <= 512 << (20 - PAGE_CACHE_SHIFT))
+ obd_max_dirty_pages = totalram_pages / 4;
else
- obd_max_dirty_pages = num_physpages / 2;
+ obd_max_dirty_pages = totalram_pages / 2;
err = obd_init_caches();
if (err)
diff --git a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
index 46aad68..7b94cb7 100644
--- a/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
+++ b/drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c
@@ -202,12 +202,12 @@ int LL_PROC_PROTO(proc_max_dirty_pages_in_mb)
1 << (20 - PAGE_CACHE_SHIFT));
/* Don't allow them to let dirty pages exceed 90% of system
* memory and set a hard minimum of 4MB. */
- if (obd_max_dirty_pages > ((num_physpages / 10) * 9)) {
+ if (obd_max_dirty_pages > ((totalram_pages / 10) * 9)) {
CERROR("Refusing to set max dirty pages to %u, which "
"is more than 90%% of available RAM; setting "
"to %lu\n", obd_max_dirty_pages,
- ((num_physpages / 10) * 9));
- obd_max_dirty_pages = ((num_physpages / 10) * 9);
+ ((totalram_pages / 10) * 9));
+ obd_max_dirty_pages = ((totalram_pages / 10) * 9);
} else if (obd_max_dirty_pages < 4 << (20 - PAGE_CACHE_SHIFT)) {
obd_max_dirty_pages = 4 << (20 - PAGE_CACHE_SHIFT);
}
diff --git a/drivers/staging/lustre/lustre/obdclass/lu_object.c b/drivers/staging/lustre/lustre/obdclass/lu_object.c
index fdf0ed3..fdaf4f8 100644
--- a/drivers/staging/lustre/lustre/obdclass/lu_object.c
+++ b/drivers/staging/lustre/lustre/obdclass/lu_object.c
@@ -849,7 +849,7 @@ static int lu_htable_order(void)
*
* Size of lu_object is (arbitrary) taken as 1K (together with inode).
*/
- cache_size = num_physpages;
+ cache_size = totalram_pages;
#if BITS_PER_LONG == 32
/* limit hashtable size for lowmem systems to low RAM */
diff --git a/drivers/staging/lustre/lustre/osc/lproc_osc.c b/drivers/staging/lustre/lustre/osc/lproc_osc.c
index 198cf3b..d2f2198 100644
--- a/drivers/staging/lustre/lustre/osc/lproc_osc.c
+++ b/drivers/staging/lustre/lustre/osc/lproc_osc.c
@@ -146,7 +146,7 @@ static ssize_t osc_max_dirty_mb_seq_write(struct file *file, const char *buffer,
if (pages_number <= 0 ||
pages_number > OSC_MAX_DIRTY_MB_MAX << (20 - PAGE_CACHE_SHIFT) ||
- pages_number > num_physpages / 4) /* 1/4 of RAM */
+ pages_number > totalram_pages / 4) /* 1/4 of RAM */
return -ERANGE;
client_obd_list_lock(&cli->cl_loi_list_lock);
diff --git a/drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c b/drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c
index 3e73254..2bd0d98 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/lproc_ptlrpc.c
@@ -302,7 +302,7 @@ ptlrpc_lprocfs_req_history_max_seq_write(struct file *file, const char *buffer,
* hose a kernel by allowing the request history to grow too
* far. */
bufpages = (svc->srv_buf_size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
- if (val > num_physpages/(2 * bufpages))
+ if (val > totalram_pages / (2 * bufpages))
return -ERANGE;
spin_lock(&svc->srv_lock);
diff --git a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
index bf53f1b..9013745 100644
--- a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
+++ b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c
@@ -156,7 +156,7 @@ int sptlrpc_proc_enc_pool_seq_show(struct seq_file *m, void *v)
"max waitqueue depth: %u\n"
"max wait time: "CFS_TIME_T"/%u\n"
,
- num_physpages,
+ totalram_pages,
PAGES_PER_POOL,
page_pools.epp_max_pages,
page_pools.epp_max_pools,
@@ -705,7 +705,7 @@ int sptlrpc_enc_pool_init(void)
* maximum capacity is 1/8 of total physical memory.
* is the 1/8 a good number?
*/
- page_pools.epp_max_pages = num_physpages / 8;
+ page_pools.epp_max_pages = totalram_pages / 8;
page_pools.epp_max_pools = npages_to_npools(page_pools.epp_max_pages);
init_waitqueue_head(&page_pools.epp_waitq);
--
1.7.9.5
next prev parent reply other threads:[~2013-07-15 13:10 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-15 13:07 [PATCH-v2 00/17] staging/lustre: fix various build issues Peng Tao
2013-07-15 13:07 ` Peng Tao [this message]
2013-07-15 13:08 ` [PATCH-v2 02/17] staging/lustre: fix Lustre code link order Peng Tao
2013-07-15 13:08 ` [PATCH-v2 03/17] staging/lustre: don't assert module owner Peng Tao
2013-07-15 13:08 ` [PATCH-v2 04/17] staging/lustre: don't assert ln_refcount in LNetGetId Peng Tao
2013-07-15 13:08 ` [PATCH-v2 05/17] stating/lustre: only build if configured as module Peng Tao
2013-07-15 13:08 ` [PATCH-v2 06/17] staging/lustre: remove HIPQUAD Peng Tao
2013-07-15 13:38 ` Joe Perches
2013-07-15 14:08 ` Peng Tao
2013-07-15 13:08 ` [PATCH-v2 07/17] staging/lustre: fix build error when !CONFIG_SMP Peng Tao
2013-07-15 13:08 ` [PATCH-v2 08/17] staging/lustre: fix build on s390 Peng Tao
2013-07-15 13:08 ` [PATCH-v2 09/17] staging/lustre/llite: add missing include file for prefetchw Peng Tao
2013-07-15 13:08 ` [PATCH-v2 10/17] staging/lustre/llite: fix build erorr if CONFIG_FS_POSIX_ACL is off Peng Tao
2013-07-15 13:08 ` [PATCH-v2 11/17] staging/lustre: fix build when CONFIG_UIDGID_STRICT_TYPE_CHECKS is on Peng Tao
2013-07-15 13:08 ` [PATCH-v2 12/17] staging/lustre: fix build error on non-x86 platforms Peng Tao
2013-07-15 13:08 ` [PATCH-v2 13/17] staging/lustre: fix build warnning on 32bit system Peng Tao
2013-07-15 13:08 ` [PATCH-v2 14/17] staging/lustre: fix for invalidatepage() API change Peng Tao
2013-07-15 13:08 ` [PATCH-v2 15/17] staging/lustre/llite: fix for d_compare " Peng Tao
2013-07-15 13:08 ` [PATCH-v2 16/17] staging/lustre/llite: readdir convert to iterate Peng Tao
2013-07-15 13:08 ` [PATCH-v2 17/17] staging/lustre: drop CONFIG_BROKEN Peng Tao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373893695-4094-2-git-send-email-bergwolf@gmail.com \
--to=bergwolf@gmail.com \
--cc=andreas.dilger@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=jiang.liu@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tao.peng@emc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox