linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mel Gorman <mgorman@suse.de>
To: Peter Zijlstra <a.p.zijlstra@chello.nl>,
	Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Linux-MM <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>, Mel Gorman <mgorman@suse.de>
Subject: [PATCH 06/18] sched: Update NUMA hinting faults once per scan
Date: Mon, 15 Jul 2013 16:20:08 +0100	[thread overview]
Message-ID: <1373901620-2021-7-git-send-email-mgorman@suse.de> (raw)
In-Reply-To: <1373901620-2021-1-git-send-email-mgorman@suse.de>

NUMA hinting faults counts and placement decisions are both recorded in the
same array which distorts the samples in an unpredictable fashion. The values
linearly accumulate during the scan and then decay creating a sawtooth-like
pattern in the per-node counts. It also means that placement decisions are
time sensitive. At best it means that it is very difficult to state that
the buffer holds a decaying average of past faulting behaviour. At worst,
it can confuse the load balancer if it sees one node with an artifically high
count due to very recent faulting activity and may create a bouncing effect.

This patch adds a second array. numa_faults stores the historical data
which is used for placement decisions. numa_faults_buffer holds the
fault activity during the current scan window. When the scan completes,
numa_faults decays and the values from numa_faults_buffer are copied
across.

Signed-off-by: Mel Gorman <mgorman@suse.de>
---
 include/linux/sched.h | 13 +++++++++++++
 kernel/sched/core.c   |  1 +
 kernel/sched/fair.c   | 16 +++++++++++++---
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/include/linux/sched.h b/include/linux/sched.h
index ba46a64..42f9818 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1506,7 +1506,20 @@ struct task_struct {
 	u64 node_stamp;			/* migration stamp  */
 	struct callback_head numa_work;
 
+	/*
+	 * Exponential decaying average of faults on a per-node basis.
+	 * Scheduling placement decisions are made based on the these counts.
+	 * The values remain static for the duration of a PTE scan
+	 */
 	unsigned long *numa_faults;
+
+	/*
+	 * numa_faults_buffer records faults per node during the current
+	 * scan window. When the scan completes, the counts in numa_faults
+	 * decay and these values are copied.
+	 */
+	unsigned long *numa_faults_buffer;
+
 	int numa_preferred_nid;
 #endif /* CONFIG_NUMA_BALANCING */
 
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index ed4e785..0bd541c 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -1596,6 +1596,7 @@ static void __sched_fork(struct task_struct *p)
 	p->numa_preferred_nid = -1;
 	p->numa_work.next = &p->numa_work;
 	p->numa_faults = NULL;
+	p->numa_faults_buffer = NULL;
 #endif /* CONFIG_NUMA_BALANCING */
 }
 
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index 731ee9e..8c7dd96 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -805,8 +805,14 @@ static void task_numa_placement(struct task_struct *p)
 
 	/* Find the node with the highest number of faults */
 	for (nid = 0; nid < nr_node_ids; nid++) {
-		unsigned long faults = p->numa_faults[nid];
+		unsigned long faults;
+
+		/* Decay existing window and copy faults since last scan */
 		p->numa_faults[nid] >>= 1;
+		p->numa_faults[nid] += p->numa_faults_buffer[nid];
+		p->numa_faults_buffer[nid] = 0;
+
+		faults = p->numa_faults[nid];
 		if (faults > max_faults) {
 			max_faults = faults;
 			max_nid = nid;
@@ -832,9 +838,13 @@ void task_numa_fault(int node, int pages, bool migrated)
 	if (unlikely(!p->numa_faults)) {
 		int size = sizeof(*p->numa_faults) * nr_node_ids;
 
-		p->numa_faults = kzalloc(size, GFP_KERNEL);
+		/* numa_faults and numa_faults_buffer share the allocation */
+		p->numa_faults = kzalloc(size * 2, GFP_KERNEL);
 		if (!p->numa_faults)
 			return;
+
+		BUG_ON(p->numa_faults_buffer);
+		p->numa_faults_buffer = p->numa_faults + nr_node_ids;
 	}
 
 	/*
@@ -848,7 +858,7 @@ void task_numa_fault(int node, int pages, bool migrated)
 	task_numa_placement(p);
 
 	/* Record the fault, double the weight if pages were migrated */
-	p->numa_faults[node] += pages << migrated;
+	p->numa_faults_buffer[node] += pages << migrated;
 }
 
 static void reset_ptenuma_scan(struct task_struct *p)
-- 
1.8.1.4


  parent reply	other threads:[~2013-07-15 15:23 UTC|newest]

Thread overview: 99+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-15 15:20 [PATCH 0/18] Basic scheduler support for automatic NUMA balancing V5 Mel Gorman
2013-07-15 15:20 ` [PATCH 01/18] mm: numa: Document automatic NUMA balancing sysctls Mel Gorman
2013-07-15 15:20 ` [PATCH 02/18] sched: Track NUMA hinting faults on per-node basis Mel Gorman
2013-07-17 10:50   ` Peter Zijlstra
2013-07-31  7:54     ` Mel Gorman
2013-07-29 10:10   ` Peter Zijlstra
2013-07-31  7:54     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 03/18] mm: numa: Account for THP numa hinting faults on the correct node Mel Gorman
2013-07-17  0:33   ` Hillf Danton
2013-07-15 15:20 ` [PATCH 04/18] mm: numa: Do not migrate or account for hinting faults on the zero page Mel Gorman
2013-07-17 11:00   ` Peter Zijlstra
2013-07-31  8:11     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 05/18] sched: Select a preferred node with the most numa hinting faults Mel Gorman
2013-07-15 15:20 ` Mel Gorman [this message]
2013-07-15 15:20 ` [PATCH 07/18] sched: Favour moving tasks towards the preferred node Mel Gorman
2013-07-25 10:40   ` [PATCH] sched, numa: migrates_degrades_locality() Peter Zijlstra
2013-07-31  8:44     ` Mel Gorman
2013-07-31  8:50       ` Peter Zijlstra
2013-07-15 15:20 ` [PATCH 08/18] sched: Reschedule task on preferred NUMA node once selected Mel Gorman
2013-07-17  1:31   ` Hillf Danton
2013-07-31  9:07     ` Mel Gorman
2013-07-31  9:38       ` Srikar Dronamraju
2013-08-01  4:47   ` Srikar Dronamraju
2013-08-01 15:38     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 09/18] sched: Add infrastructure for split shared/private accounting of NUMA hinting faults Mel Gorman
2013-07-17  2:17   ` Hillf Danton
2013-07-31  9:08     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 10/18] sched: Increase NUMA PTE scanning when a new preferred node is selected Mel Gorman
2013-07-15 15:20 ` [PATCH 11/18] sched: Check current->mm before allocating NUMA faults Mel Gorman
2013-07-15 15:20 ` [PATCH 12/18] sched: Set the scan rate proportional to the size of the task being scanned Mel Gorman
2013-07-15 15:20 ` [PATCH 13/18] mm: numa: Scan pages with elevated page_mapcount Mel Gorman
2013-07-17  5:22   ` Sam Ben
2013-07-31  9:13     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 14/18] sched: Remove check that skips small VMAs Mel Gorman
2013-07-15 15:20 ` [PATCH 15/18] sched: Set preferred NUMA node based on number of private faults Mel Gorman
2013-07-18  1:53   ` [PATCH 15/18] fix compilation with !CONFIG_NUMA_BALANCING Rik van Riel
2013-07-31  9:19     ` Mel Gorman
2013-07-26 11:20   ` [PATCH 15/18] sched: Set preferred NUMA node based on number of private faults Peter Zijlstra
2013-07-31  9:29     ` Mel Gorman
2013-07-31  9:34       ` Peter Zijlstra
2013-07-31 10:10         ` Mel Gorman
2013-07-15 15:20 ` [PATCH 16/18] sched: Avoid overloading CPUs on a preferred NUMA node Mel Gorman
2013-07-15 20:03   ` Peter Zijlstra
2013-07-16  8:23     ` Mel Gorman
2013-07-16 10:35       ` Peter Zijlstra
2013-07-16 15:55   ` Hillf Danton
2013-07-16 16:01     ` Mel Gorman
2013-07-17 10:54   ` Peter Zijlstra
2013-07-31  9:49     ` Mel Gorman
2013-08-01  7:10   ` Srikar Dronamraju
2013-08-01 15:42     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 17/18] sched: Retry migration of tasks to CPU on a preferred node Mel Gorman
2013-07-25 10:33   ` Peter Zijlstra
2013-07-31 10:03     ` Mel Gorman
2013-07-31 10:05       ` Peter Zijlstra
2013-07-31 10:07         ` Mel Gorman
2013-07-25 10:35   ` Peter Zijlstra
2013-08-01  5:13   ` Srikar Dronamraju
2013-08-01 15:46     ` Mel Gorman
2013-07-15 15:20 ` [PATCH 18/18] sched: Swap tasks when reschuling if a CPU on a target node is imbalanced Mel Gorman
2013-07-15 20:11   ` Peter Zijlstra
2013-07-16  9:41     ` Mel Gorman
2013-08-01  4:59   ` Srikar Dronamraju
2013-08-01 15:48     ` Mel Gorman
2013-07-15 20:14 ` [PATCH 0/18] Basic scheduler support for automatic NUMA balancing V5 Peter Zijlstra
2013-07-16 15:10 ` Srikar Dronamraju
2013-07-25 10:36 ` Peter Zijlstra
2013-07-31 10:30   ` Mel Gorman
2013-07-31 10:48     ` Peter Zijlstra
2013-07-31 11:57       ` Mel Gorman
2013-07-31 15:30         ` Peter Zijlstra
2013-07-31 16:11           ` Mel Gorman
2013-07-31 16:39             ` Peter Zijlstra
2013-08-01 15:51               ` Mel Gorman
2013-07-25 10:38 ` [PATCH] mm, numa: Sanitize task_numa_fault() callsites Peter Zijlstra
2013-07-31 11:25   ` Mel Gorman
2013-07-25 10:41 ` [PATCH] sched, numa: Improve scanner Peter Zijlstra
2013-07-25 10:46 ` [PATCH] mm, sched, numa: Create a per-task MPOL_INTERLEAVE policy Peter Zijlstra
2013-07-26  9:55   ` Peter Zijlstra
2013-08-26 16:10     ` Peter Zijlstra
2013-08-26 16:14       ` Peter Zijlstra
2013-07-30 11:24 ` [PATCH] mm, numa: Change page last {nid,pid} into {cpu,pid} Peter Zijlstra
2013-08-01 22:33   ` Rik van Riel
2013-07-30 11:38 ` [PATCH] sched, numa: Use {cpu, pid} to create task groups for shared faults Peter Zijlstra
2013-07-31 15:07   ` Peter Zijlstra
2013-07-31 15:38     ` Peter Zijlstra
2013-07-31 15:45     ` Don Morris
2013-07-31 16:05       ` Peter Zijlstra
2013-08-02 16:47       ` [PATCH -v3] " Peter Zijlstra
2013-08-02 16:50         ` [PATCH] mm, numa: Do not group on RO pages Peter Zijlstra
2013-08-02 19:56           ` Peter Zijlstra
2013-08-05 19:36           ` [PATCH] numa,sched: use group fault statistics in numa placement Rik van Riel
2013-08-09 13:55             ` Don Morris
2013-08-28 16:41         ` [PATCH -v3] sched, numa: Use {cpu, pid} to create task groups for shared faults Peter Zijlstra
2013-08-28 17:10           ` Rik van Riel
2013-08-01  6:23   ` [PATCH,RFC] numa,sched: use group fault statistics in numa placement Rik van Riel
2013-08-01 10:37     ` Peter Zijlstra
2013-08-01 16:35       ` Rik van Riel
2013-08-01 22:36   ` [RFC PATCH -v2] " Rik van Riel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373901620-2021-7-git-send-email-mgorman@suse.de \
    --to=mgorman@suse.de \
    --cc=a.p.zijlstra@chello.nl \
    --cc=aarcange@redhat.com \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mingo@kernel.org \
    --cc=srikar@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).