[PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Lee Jones]

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/hrefv60plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 3d580d6..46fd8af 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -26,7 +26,7 @@
 
 	soc {
 		i2c@80110000 {
-			bu21013_tp@0x5c {
+			bu21013_tp@5c {
 				reset-gpio = <&gpio4 15 0x4>;
 			};
 		};
-- 
1.8.1.2

[PATCH 02/22] ARM: ux500: Remove '0x's from nomadik stn8815 DTS file

[Lee Jones]

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index a3acfa7..c2ee51e 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -742,14 +742,14 @@
 		#size-cells = <1>;
 		ranges;
 
-		vica: intc@0x10140000 {
+		vica: intc@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@0x10140020 {
+		vicb: intc@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-- 
1.8.1.2

[PATCH 03/22] ARM: ux500: Remove '0x's from U300 DTS file

[Lee Jones]

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/ste-u300.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts
index 8a1032c..a9da480 100644
--- a/arch/arm/boot/dts/ste-u300.dts
+++ b/arch/arm/boot/dts/ste-u300.dts
@@ -307,7 +307,7 @@
 		clocks = <&i2c0_clk>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		ab3100: ab3100@0x48 {
+		ab3100: ab3100@48 {
 			compatible = "stericsson,ab3100";
 			reg = <0x48>;
 			interrupt-parent = <&vica>;
@@ -385,10 +385,10 @@
 		clocks = <&i2c1_clk>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		fwcam0: fwcam@0x10 {
+		fwcam0: fwcam@10 {
 			reg = <0x10>;
 		};
-		fwcam1: fwcam@0x5d {
+		fwcam1: fwcam@5d {
 			reg = <0x5d>;
 		};
 	};
-- 
1.8.1.2

[PATCH 04/22] ARM: ux500: Remove '0x's from Animeo IP DTS file

[Lee Jones]

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/animeo_ip.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 3a1de9e..4cb0342 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -105,7 +105,7 @@
 				reg = <0x48000 0x8000>;
 			};
 
-			user_block@0x50000 {
+			user_block@50000 {
 				label = "user_block";
 				reg = <0x50000 0xb0000>;
 			};
-- 
1.8.1.2

[PATCH 05/22] ARM: ux500: Remove '0x's from BCM11351 BRT DTS file

[Lee Jones]

Cc: Christian Daudt <csd@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/bcm11351-brt.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 67ec524..fdace5d 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -27,18 +27,18 @@
 		status = "okay";
 	};
 
-	sdio0: sdio@0x3f180000 {
+	sdio0: sdio@3f180000 {
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio1: sdio@0x3f190000 {
+	sdio1: sdio@3f190000 {
 		non-removable;
 		max-frequency = <48000000>;
 		status = "okay";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
+	sdio3: sdio@3f1b0000 {
 		max-frequency = <48000000>;
 		status = "okay";
 	};
-- 
1.8.1.2

[PATCH 06/22] ARM: ux500: Remove '0x's from BCM11351 DTS file

[Lee Jones]

Cc: Christian Daudt <csd@broadcom.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/bcm11351.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index c0cdf66..db5873a 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -34,7 +34,7 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "bcm,bcm11351-smc", "bcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
@@ -63,28 +63,28 @@
 		clock-frequency = <32768>;
 	};
 
-	sdio0: sdio@0x3f180000 {
+	sdio0: sdio@3f180000 {
 		compatible = "bcm,kona-sdhci";
 		reg = <0x3f180000 0x10000>;
 		interrupts = <0x0 77 0x4>;
 		status = "disabled";
 	};
 
-	sdio1: sdio@0x3f190000 {
+	sdio1: sdio@3f190000 {
 		compatible = "bcm,kona-sdhci";
 		reg = <0x3f190000 0x10000>;
 		interrupts = <0x0 76 0x4>;
 		status = "disabled";
 	};
 
-	sdio2: sdio@0x3f1a0000 {
+	sdio2: sdio@3f1a0000 {
 		compatible = "bcm,kona-sdhci";
 		reg = <0x3f1a0000 0x10000>;
 		interrupts = <0x0 74 0x4>;
 		status = "disabled";
 	};
 
-	sdio3: sdio@0x3f1b0000 {
+	sdio3: sdio@3f1b0000 {
 		compatible = "bcm,kona-sdhci";
 		reg = <0x3f1b0000 0x10000>;
 		interrupts = <0x0 73 0x4>;
-- 
1.8.1.2

[PATCH 07/22] ARM: ux500: Remove '0x's from Exynos4110 DTSI file

[Lee Jones]

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/exynos4210.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b7f358a..53e2527 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -72,7 +72,7 @@
 		};
 	};
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4210-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
-- 
1.8.1.2

[PATCH 08/22] ARM: ux500: Remove '0x's from Exynos4x12 DTSI file

[Lee Jones]

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/exynos4x12.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194..3aa2f06 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -28,7 +28,7 @@
 		pinctrl3 = &pinctrl_3;
 	};
 
-	clock: clock-controller@0x10030000 {
+	clock: clock-controller@10030000 {
 		compatible = "samsung,exynos4412-clock";
 		reg = <0x10030000 0x20000>;
 		#clock-cells = <1>;
-- 
1.8.1.2

[PATCH 09/22] ARM: ux500: Remove '0x's from Exynos5250 DTS file

[Lee Jones]

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/exynos5250.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..24c0888 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -68,17 +68,17 @@
 		};
 	};
 
-	pd_gsc: gsc-power-domain@0x10044000 {
+	pd_gsc: gsc-power-domain@10044000 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044000 0x20>;
 	};
 
-	pd_mfc: mfc-power-domain@0x10044040 {
+	pd_mfc: mfc-power-domain@10044040 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044040 0x20>;
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5250-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
@@ -562,7 +562,7 @@
 		};
 	};
 
-	gsc_0:  gsc@0x13e00000 {
+	gsc_0:  gsc@13e00000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e00000 0x1000>;
 		interrupts = <0 85 0>;
@@ -571,7 +571,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_1:  gsc@0x13e10000 {
+	gsc_1:  gsc@13e10000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e10000 0x1000>;
 		interrupts = <0 86 0>;
@@ -580,7 +580,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_2:  gsc@0x13e20000 {
+	gsc_2:  gsc@13e20000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e20000 0x1000>;
 		interrupts = <0 87 0>;
@@ -589,7 +589,7 @@
 		clock-names = "gscl";
 	};
 
-	gsc_3:  gsc@0x13e30000 {
+	gsc_3:  gsc@13e30000 {
 		compatible = "samsung,exynos5-gsc";
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
-- 
1.8.1.2

[PATCH 10/22] ARM: ux500: Remove '0x's from Exynos5420 DTS file

[Lee Jones]

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/exynos5420.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8c54c4b..9e90d1e 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -59,7 +59,7 @@
 		};
 	};
 
-	clock: clock-controller@0x10010000 {
+	clock: clock-controller@10010000 {
 		compatible = "samsung,exynos5420-clock";
 		reg = <0x10010000 0x30000>;
 		#clock-cells = <1>;
-- 
1.8.1.2

Re: [PATCH 10/22] ARM: ux500: Remove '0x's from Exynos5420 DTS file

[Russell King - ARM Linux]

On Fri, Jul 19, 2013 at 02:58:41PM +0100, Lee Jones wrote:
> Cc: Kukjin Kim <kgene.kim@samsung.com>
> Cc: linux-samsung-soc@vger.kernel.org
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/exynos5420.dtsi | 2 +-

One question.  What have all these files got to do with ux500 ?

Re: [PATCH 10/22] ARM: ux500: Remove '0x's from Exynos5420 DTS file

[Lee Jones]

On Fri, 19 Jul 2013, Russell King - ARM Linux wrote:

> On Fri, Jul 19, 2013 at 02:58:41PM +0100, Lee Jones wrote:
> > Cc: Kukjin Kim <kgene.kim@samsung.com>
> > Cc: linux-samsung-soc@vger.kernel.org
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> >  arch/arm/boot/dts/exynos5420.dtsi | 2 +-
> 
> One question.  What have all these files got to do with ux500 ?

They don't, sorry about that. Force of habit.

I'll resubmit on Monday.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 11/22] ARM: ux500: Remove '0x's from Exynos5440 DTS file

[Lee Jones]

Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/exynos5440.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index ff7f5d8..0cedba4 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -20,7 +20,7 @@
 		spi0 = &spi_0;
 	};
 
-	clock: clock-controller@0x160000 {
+	clock: clock-controller@160000 {
 		compatible = "samsung,exynos5440-clock";
 		reg = <0x160000 0x1000>;
 		#clock-cells = <1>;
-- 
1.8.1.2

[PATCH 12/22] ARM: ux500: Remove '0x's from OMAP2420 H4 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap2420-h4.dts | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts
index 224c08f..34cdecb 100644
--- a/arch/arm/boot/dts/omap2420-h4.dts
+++ b/arch/arm/boot/dts/omap2420-h4.dts
@@ -50,15 +50,15 @@
 			label = "bootloader";
 			reg = <0 0x20000>;
 		};
-		partition@0x20000 {
+		partition@20000 {
 			label = "params";
 			reg = <0x20000 0x20000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "kernel";
 			reg = <0x40000 0x200000>;
 		};
-		partition@0x240000 {
+		partition@240000 {
 			label = "file-system";
 			reg = <0x240000 0x3dc0000>;
 		};
-- 
1.8.1.2

[PATCH 13/22] ARM: ux500: Remove '0x's from OMAP3 IGEP0020 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap3-igep0020.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index e8c4828..f7a8122 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -99,19 +99,19 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
-- 
1.8.1.2

[PATCH 14/22] ARM: ux500: Remove '0x's from OMAP3 IGEP0030 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap3-igep0030.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 644d0538..f628200 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -74,19 +74,19 @@
 			label = "SPL";
 			reg = <0 0x100000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x100000 0x180000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x280000 0x100000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x380000 0x300000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x680000 0x1f980000>;
 		};
-- 
1.8.1.2

[PATCH 15/22] ARM: ux500: Remove '0x's from OMAP3 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap3.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 7d95cda..16420ae 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -111,7 +111,7 @@
 			pinctrl-single,function-mask = <0x7f1f>;
 		};
 
-		omap3_pmx_wkup: pinmux@0x48002a00 {
+		omap3_pmx_wkup: pinmux@48002a00 {
 			compatible = "ti,omap3-padconf", "pinctrl-single";
 			reg = <0x48002a00 0x5c>;
 			#address-cells = <1>;
-- 
1.8.1.2

[PATCH 16/22] ARM: ux500: Remove '0x's from OMAP3430 SDP DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap3430-sdp.dts | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/omap3430-sdp.dts b/arch/arm/boot/dts/omap3430-sdp.dts
index e2249bc..281914e 100644
--- a/arch/arm/boot/dts/omap3430-sdp.dts
+++ b/arch/arm/boot/dts/omap3430-sdp.dts
@@ -84,15 +84,15 @@
 			label = "bootloader-nor";
 			reg = <0 0x40000>;
 		};
-		partition@0x40000 {
+		partition@40000 {
 			label = "params-nor";
 			reg = <0x40000 0x40000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "kernel-nor";
 			reg = <0x80000 0x200000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "filesystem-nor";
 			reg = <0x240000 0x7d80000>;
 		};
@@ -125,19 +125,19 @@
 			label = "xloader-nand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-nand";
 			reg = <0x80000 0x140000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "params-nand";
 			reg = <0x1c0000 0xc0000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel-nand";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem-nand";
 			reg = <0x780000 0x7880000>;
 		};
@@ -170,19 +170,19 @@
 			label = "xloader-onenand";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "bootloader-onenand";
 			reg = <0x80000 0x40000>;
 		};
-		partition@0xc0000 {
+		partition@c0000 {
 			label = "params-onenand";
 			reg = <0xc0000 0x20000>;
 		};
-		partition@0xe0000 {
+		partition@e0000 {
 			label = "kernel-onenand";
 			reg = <0xe0000 0x200000>;
 		};
-		partition@0x2e0000 {
+		partition@2e0000 {
 			label = "filesystem-onenand";
 			reg = <0x2e0000 0xfd20000>;
 		};
-- 
1.8.1.2

[PATCH 17/22] ARM: ux500: Remove '0x's from OMAP4 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap4.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b..45708e1 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -56,7 +56,7 @@
 		cache-level = <2>;
 	};
 
-	local-timer@0x48240600 {
+	local-timer@48240600 {
 		compatible = "arm,cortex-a9-twd-timer";
 		reg = <0x48240600 0x20>;
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
-- 
1.8.1.2

[PATCH 18/22] ARM: ux500: Remove '0x's from OMAP5 DTS file

[Lee Jones]

Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/omap5.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..be58604 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -604,7 +604,7 @@
 			ti,hwmods = "wd_timer2";
 		};
 
-		emif1: emif@0x4c000000 {
+		emif1: emif@4c000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif1";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
@@ -615,7 +615,7 @@
 			hw-caps-temp-alert;
 		};
 
-		emif2: emif@0x4d000000 {
+		emif2: emif@4d000000 {
 			compatible	= "ti,emif-4d5";
 			ti,hwmods	= "emif2";
 			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
-- 
1.8.1.2

[PATCH 19/22] ARM: ux500: Remove '0x's from R8A7779 DTS file

[Lee Jones]

Cc: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/r8a7779.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6..86bd487 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -65,7 +65,7 @@
 		sense-bitfield-width = <2>;
 	};
 
-	i2c0: i2c@0xffc70000 {
+	i2c0: i2c@ffc70000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
@@ -74,7 +74,7 @@
 		interrupts = <0 79 0x4>;
 	};
 
-	i2c1: i2c@0xffc71000 {
+	i2c1: i2c@ffc71000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
@@ -83,7 +83,7 @@
 		interrupts = <0 82 0x4>;
 	};
 
-	i2c2: i2c@0xffc72000 {
+	i2c2: i2c@ffc72000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
@@ -92,7 +92,7 @@
 		interrupts = <0 80 0x4>;
 	};
 
-	i2c3: i2c@0xffc73000 {
+	i2c3: i2c@ffc73000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "renesas,rmobile-iic";
-- 
1.8.1.2

[PATCH 20/22] ARM: ux500: Remove '0x's from Spear 300 DTS file

[Lee Jones]

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/spear300.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
index f79b3df..8970a4a 100644
--- a/arch/arm/boot/dts/spear300.dtsi
+++ b/arch/arm/boot/dts/spear300.dtsi
@@ -52,7 +52,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0x50000000 {
+		shirq: interrupt-controller@50000000 {
 			compatible = "st,spear300-shirq";
 			reg = <0x50000000 0x1000>;
 			interrupts = <28>;
-- 
1.8.1.2

Re: [PATCH 20/22] ARM: ux500: Remove '0x's from Spear 300 DTS file

[Viresh Kumar]

On Fri, Jul 19, 2013 at 7:28 PM, Lee Jones <lee.jones@linaro.org> wrote:
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/spear300.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
> index f79b3df..8970a4a 100644
> --- a/arch/arm/boot/dts/spear300.dtsi
> +++ b/arch/arm/boot/dts/spear300.dtsi
> @@ -52,7 +52,7 @@
>                         status = "disabled";
>                 };
>
> -               shirq: interrupt-controller@0x50000000 {
> +               shirq: interrupt-controller@50000000 {
>                         compatible = "st,spear300-shirq";
>                         reg = <0x50000000 0x1000>;
>                         interrupts = <28>;

Should Ux500 come in subject line? And please write Spear as
SPEAr.

Otherwise all three patches look fine.

Ackedy-by: Viresh Kumar <viresh.kumar@linaro.org>

Re: [PATCH 20/22] ARM: ux500: Remove '0x's from Spear 300 DTS file

[Lee Jones]

On Sat, 20 Jul 2013, Viresh Kumar wrote:

> On Fri, Jul 19, 2013 at 7:28 PM, Lee Jones <lee.jones@linaro.org> wrote:
> > Cc: Viresh Kumar <viresh.kumar@linaro.org>
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> >  arch/arm/boot/dts/spear300.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi
> > index f79b3df..8970a4a 100644
> > --- a/arch/arm/boot/dts/spear300.dtsi
> > +++ b/arch/arm/boot/dts/spear300.dtsi
> > @@ -52,7 +52,7 @@
> >                         status = "disabled";
> >                 };
> >
> > -               shirq: interrupt-controller@0x50000000 {
> > +               shirq: interrupt-controller@50000000 {
> >                         compatible = "st,spear300-shirq";
> >                         reg = <0x50000000 0x1000>;
> >                         interrupts = <28>;
> 
> Should Ux500 come in subject line? And please write Spear as
> SPEAr.

Yes, you're right, I will correct them.

I did this for all twenty odd patches, whoops!

> Otherwise all three patches look fine.
> 
> Ackedy-by: Viresh Kumar <viresh.kumar@linaro.org>

Thanks.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 21/22] ARM: ux500: Remove '0x's from Spear 310 DTS file

[Lee Jones]

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/spear310.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi
index 9537208..dc263e4 100644
--- a/arch/arm/boot/dts/spear310.dtsi
+++ b/arch/arm/boot/dts/spear310.dtsi
@@ -40,7 +40,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb4000000 {
+		shirq: interrupt-controller@b4000000 {
 			compatible = "st,spear310-shirq";
 			reg = <0xb4000000 0x1000>;
 			interrupts = <28 29 30 1>;
-- 
1.8.1.2

[PATCH 22/22] ARM: ux500: Remove '0x's from Spear 320 DTS file

[Lee Jones]

Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/spear320.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi
index ffea342..a82d76e5 100644
--- a/arch/arm/boot/dts/spear320.dtsi
+++ b/arch/arm/boot/dts/spear320.dtsi
@@ -55,7 +55,7 @@
 			status = "disabled";
 		};
 
-		shirq: interrupt-controller@0xb3000000 {
+		shirq: interrupt-controller@b3000000 {
 			compatible = "st,spear320-shirq";
 			reg = <0xb3000000 0x1000>;
 			interrupts = <30 28 29 1>;
-- 
1.8.1.2

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Pavel Machek]

On Fri 2013-07-19 14:58:32, Lee Jones wrote:
> Signed-off-by: Lee Jones <lee.jones@linaro.org>

Why?

									Pavel

> diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
> index 3d580d6..46fd8af 100644
> --- a/arch/arm/boot/dts/hrefv60plus.dts
> +++ b/arch/arm/boot/dts/hrefv60plus.dts
> @@ -26,7 +26,7 @@
>  
>  	soc {
>  		i2c@80110000 {
> -			bu21013_tp@0x5c {
> +			bu21013_tp@5c {
>  				reset-gpio = <&gpio4 15 0x4>;
>  			};
>  		};

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Lee Jones]

On Tue, 30 Jul 2013, Pavel Machek wrote:

> On Fri 2013-07-19 14:58:32, Lee Jones wrote:
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> 
> Why?

Convention.

> > diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
> > index 3d580d6..46fd8af 100644
> > --- a/arch/arm/boot/dts/hrefv60plus.dts
> > +++ b/arch/arm/boot/dts/hrefv60plus.dts
> > @@ -26,7 +26,7 @@
> >  
> >  	soc {
> >  		i2c@80110000 {
> > -			bu21013_tp@0x5c {
> > +			bu21013_tp@5c {
> >  				reset-gpio = <&gpio4 15 0x4>;
> >  			};
> >  		};
> 

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

[PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Lee Jones]

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/hrefv60plus.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 3d580d6..46fd8af 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -26,7 +26,7 @@
 
 	soc {
 		i2c@80110000 {
-			bu21013_tp@0x5c {
+			bu21013_tp@5c {
 				reset-gpio = <&gpio4 15 0x4>;
 			};
 		};
-- 
1.8.1.2

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Mark Jackson]

On 22/07/13 11:52, Lee Jones wrote:
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
> ---
>  arch/arm/boot/dts/hrefv60plus.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
> index 3d580d6..46fd8af 100644
> --- a/arch/arm/boot/dts/hrefv60plus.dts
> +++ b/arch/arm/boot/dts/hrefv60plus.dts
> @@ -26,7 +26,7 @@
>  
>  	soc {
>  		i2c@80110000 {
> -			bu21013_tp@0x5c {
> +			bu21013_tp@5c {

Just a query ... why this one .... ^^^ ...

>  				reset-gpio = <&gpio4 15 0x4>;

... and not this one .................................. ^^^ ?

>  			};
>  		};
> 

The same for all the other patches in this series.

If this is by design, it might be worth mentioning why some are
removed and not others.

Mark J.

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Lee Jones]

On Mon, 22 Jul 2013, Mark Jackson wrote:

> On 22/07/13 11:52, Lee Jones wrote:
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> > ---
> >  arch/arm/boot/dts/hrefv60plus.dts | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
> > index 3d580d6..46fd8af 100644
> > --- a/arch/arm/boot/dts/hrefv60plus.dts
> > +++ b/arch/arm/boot/dts/hrefv60plus.dts
> > @@ -26,7 +26,7 @@
> >  
> >  	soc {
> >  		i2c@80110000 {
> > -			bu21013_tp@0x5c {
> > +			bu21013_tp@5c {
> 
> Just a query ... why this one .... ^^^ ...
> 
> >  				reset-gpio = <&gpio4 15 0x4>;
> 
> ... and not this one .................................. ^^^ ?
> 
> >  			};
> >  		};
> > 
> 
> The same for all the other patches in this series.
> 
> If this is by design, it might be worth mentioning why some are
> removed and not others.

I can't explain why there seems to be inconsistencies between node
names and the remaining properties. The best I can do is refer you to
the documentation where you can see that this is the standard:

Documentation/devicetree/usage-model.txt
and
http://www.devicetree.org/Device_Tree_Usage


-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Mark Jackson]

On 22/07/13 14:41, Lee Jones wrote:
> On Mon, 22 Jul 2013, Mark Jackson wrote:
> 
>> On 22/07/13 11:52, Lee Jones wrote:
>>> Signed-off-by: Lee Jones <lee.jones@linaro.org>
>>> ---
>>>  arch/arm/boot/dts/hrefv60plus.dts | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
>>> index 3d580d6..46fd8af 100644
>>> --- a/arch/arm/boot/dts/hrefv60plus.dts
>>> +++ b/arch/arm/boot/dts/hrefv60plus.dts
>>> @@ -26,7 +26,7 @@
>>>  
>>>  	soc {
>>>  		i2c@80110000 {
>>> -			bu21013_tp@0x5c {
>>> +			bu21013_tp@5c {
>>
>> Just a query ... why this one .... ^^^ ...
>>
>>>  				reset-gpio = <&gpio4 15 0x4>;
>>
>> ... and not this one .................................. ^^^ ?
>>
>>>  			};
>>>  		};
>>>
>>
>> The same for all the other patches in this series.
>>
>> If this is by design, it might be worth mentioning why some are
>> removed and not others.
> 
> I can't explain why there seems to be inconsistencies between node
> names and the remaining properties. The best I can do is refer you to
> the documentation where you can see that this is the standard:
> 
> Documentation/devicetree/usage-model.txt
> and
> http://www.devicetree.org/Device_Tree_Usage

Ho, ho ... don't you just love "standards" !!

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Linus Walleij]

On Mon, Jul 22, 2013 at 12:52 PM, Lee Jones <lee.jones@linaro.org> wrote:

> Signed-off-by: Lee Jones <lee.jones@linaro.org>

None of these patches apply since I applied your other patch series
that rename all the files ... can you respin the ux500 "0x"-strip patches
on top of the rename set? My ux500-devicetree branch can be used
as a baseline.

Yours,
Linus Walleij

Re: [PATCH 01/22] ARM: ux500: Remove '0x's from HREF v60+ DTS file

[Lee Jones]

On Wed, 07 Aug 2013, Linus Walleij wrote:

> On Mon, Jul 22, 2013 at 12:52 PM, Lee Jones <lee.jones@linaro.org> wrote:
> 
> > Signed-off-by: Lee Jones <lee.jones@linaro.org>
> 
> None of these patches apply since I applied your other patch series
> that rename all the files ... can you respin the ux500 "0x"-strip patches
> on top of the rename set? My ux500-devicetree branch can be used
> as a baseline.

I can do that. Although, would you prefer that I fixed-up my renaming
patches, then applied the 0x patches on top instead?

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog