public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH 1/3] regulators: max8660: use i2c_id->driver_data rather than ->name
@ 2013-08-02  8:19 Daniel Mack
  2013-08-02  8:19 ` [PATCH 2/3] regulators: max8660: add a shorthand to &client->dev Daniel Mack
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Daniel Mack @ 2013-08-02  8:19 UTC (permalink / raw)
  To: linux-kernel; +Cc: lgirdwood, broonie, Daniel Mack

Introduce an enum and denote the device type via struct i2c_id's
driver_data field rather than comparing strings.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 drivers/regulator/max8660.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index d428ef9..ba3b8af 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -305,6 +305,11 @@ static const struct regulator_desc max8660_reg[] = {
 	},
 };
 
+enum {
+	MAX8660 = 0,
+	MAX8661 = 1,
+};
+
 static int max8660_probe(struct i2c_client *client,
 				   const struct i2c_device_id *i2c_id)
 {
@@ -313,6 +318,7 @@ static int max8660_probe(struct i2c_client *client,
 	struct regulator_config config = { };
 	struct max8660 *max8660;
 	int boot_on, i, id, ret = -EINVAL;
+	unsigned int type;
 
 	if (pdata->num_subdevs > MAX8660_V_END) {
 		dev_err(&client->dev, "Too many regulators found!\n");
@@ -327,6 +333,7 @@ static int max8660_probe(struct i2c_client *client,
 
 	max8660->client = client;
 	rdev = max8660->rdev;
+	type = i2c_id->driver_data;
 
 	if (pdata->en34_is_high) {
 		/* Simulate always on */
@@ -376,7 +383,7 @@ static int max8660_probe(struct i2c_client *client,
 			break;
 
 		case MAX8660_V7:
-			if (!strcmp(i2c_id->name, "max8661")) {
+			if (type == MAX8661) {
 				dev_err(&client->dev, "Regulator not on this chip!\n");
 				goto err_out;
 			}
@@ -431,8 +438,8 @@ static int max8660_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id max8660_id[] = {
-	{ "max8660", 0 },
-	{ "max8661", 0 },
+	{ .name = "max8660", .driver_data = MAX8660 },
+	{ .name = "max8661", .driver_data = MAX8661 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, max8660_id);
-- 
1.8.3.1


^ permalink raw reply related	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-08-02 10:18 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-02  8:19 [PATCH 1/3] regulators: max8660: use i2c_id->driver_data rather than ->name Daniel Mack
2013-08-02  8:19 ` [PATCH 2/3] regulators: max8660: add a shorthand to &client->dev Daniel Mack
2013-08-02 10:16   ` Mark Brown
2013-08-02  8:19 ` [PATCH 3/3] regulators: max8660: add DT bindings Daniel Mack
2013-08-02 10:18   ` Mark Brown
2013-08-02 10:16 ` [PATCH 1/3] regulators: max8660: use i2c_id->driver_data rather than ->name Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox