From: Jisheng Zhang <jszhang@marvell.com>
To: <jszhang@marvell.com>, <jason@lakedaemon.net>, <andrew@lunn.ch>,
<gregory.clement@free-electrons.com>,
<thomas.petazzoni@free-electrons.com>,
<ezequiel.garcia@free-electrons.com>, <mturquette@linaro.org>,
<sebastian.hesselbarth@gmail.com>, <linus.walleij@linaro.org>
Cc: <linux@arm.linux.org.uk>, <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH 4/4] pinctrl: mvebu: add missing iounmap
Date: Thu, 22 Aug 2013 20:46:51 +0800 [thread overview]
Message-ID: <1377175611-4241-5-git-send-email-jszhang@marvell.com> (raw)
In-Reply-To: <1377175611-4241-1-git-send-email-jszhang@marvell.com>
Add missing iounmap to prove error path and remove path
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
drivers/pinctrl/mvebu/pinctrl-mvebu.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/mvebu/pinctrl-mvebu.c b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
index bb7ddb1..d1ac6b7 100644
--- a/drivers/pinctrl/mvebu/pinctrl-mvebu.c
+++ b/drivers/pinctrl/mvebu/pinctrl-mvebu.c
@@ -601,7 +601,8 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
GFP_KERNEL);
if (!pctl) {
dev_err(&pdev->dev, "unable to alloc driver\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto bail_out;
}
pctl->desc.name = dev_name(&pdev->dev);
@@ -631,7 +632,8 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
if (ctrl->mpp_get || ctrl->mpp_set) {
if (!ctrl->name || !ctrl->mpp_get || !ctrl->mpp_set) {
dev_err(&pdev->dev, "wrong soc control info\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto bail_out;
}
pctl->num_groups += 1;
continue;
@@ -641,7 +643,8 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
names = devm_kzalloc(&pdev->dev, ctrl->npins * 8, GFP_KERNEL);
if (!names) {
dev_err(&pdev->dev, "failed to alloc mpp names\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto bail_out;
}
for (k = 0; k < ctrl->npins; k++)
sprintf(names + 8*k, "mpp%d", ctrl->pid+k);
@@ -653,7 +656,8 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
sizeof(struct pinctrl_pin_desc), GFP_KERNEL);
if (!pdesc) {
dev_err(&pdev->dev, "failed to alloc pinctrl pins\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto bail_out;
}
for (n = 0; n < pctl->desc.npins; n++)
@@ -664,7 +668,8 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
sizeof(struct mvebu_pinctrl_group), GFP_KERNEL);
if (!pctl->groups) {
dev_err(&pdev->dev, "failed to alloc pinctrl groups\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto bail_out;
}
/* assign mpp controls to groups */
@@ -735,13 +740,14 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
ret = mvebu_pinctrl_build_functions(pdev, pctl);
if (ret) {
dev_err(&pdev->dev, "unable to build functions\n");
- return ret;
+ goto bail_out;
}
pctl->pctldev = pinctrl_register(&pctl->desc, &pdev->dev, pctl);
if (!pctl->pctldev) {
dev_err(&pdev->dev, "unable to register pinctrl driver\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto bail_out;
}
dev_info(&pdev->dev, "registered pinctrl driver\n");
@@ -751,11 +757,15 @@ int mvebu_pinctrl_probe(struct platform_device *pdev)
pinctrl_add_gpio_range(pctl->pctldev, &soc->gpioranges[n]);
return 0;
+bail_out:
+ iounmap(base);
+ return ret;
}
int mvebu_pinctrl_remove(struct platform_device *pdev)
{
struct mvebu_pinctrl *pctl = platform_get_drvdata(pdev);
+ iounmap(pctl->base);
pinctrl_unregister(pctl->pctldev);
return 0;
}
--
1.8.4.rc3
next prev parent reply other threads:[~2013-08-22 12:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-22 12:46 [PATCH 0/4] arm: mvebu: add missing of_node_put and iounmap Jisheng Zhang
2013-08-22 12:46 ` [PATCH 1/4] arm: mvebu: add missing of_node_put() to fix reference leak Jisheng Zhang
2013-08-22 12:46 ` [PATCH 2/4] bus: " Jisheng Zhang
2013-08-22 12:46 ` [PATCH 3/4] clk: mvebu: add missing iounmap Jisheng Zhang
2013-08-22 22:31 ` Mike Turquette
2013-08-22 12:46 ` Jisheng Zhang [this message]
2013-08-22 13:22 ` [PATCH 4/4] pinctrl: " Ezequiel Garcia
2013-08-23 18:06 ` Linus Walleij
2013-08-23 20:19 ` Ezequiel Garcia
2013-08-24 3:55 ` Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377175611-4241-5-git-send-email-jszhang@marvell.com \
--to=jszhang@marvell.com \
--cc=andrew@lunn.ch \
--cc=ezequiel.garcia@free-electrons.com \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mturquette@linaro.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).