[PATCH v6 3/3] mmc: dw_mmc: Set timeout to max upon resume

[Doug Anderson <dianders@chromium.org>]

The TMOUT register is initted to 0xffffffff at probe time but isn't
initted after suspend/resume.  Add an init of this value.

No problems were observed without this (it will also get initted in
__dw_mci_start_request if there is data to send), but it makes the
register dump before and after suspend cleaner.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
---
Changes in v6: None
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None

 drivers/mmc/host/dw_mmc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index f6c7545..6a9a846 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -2506,6 +2506,9 @@ int dw_mci_resume(struct dw_mci *host)
 	/* Restore the old value at FIFOTH register */
 	mci_writel(host, FIFOTH, host->fifoth_val);
 
+	/* Put in max timeout */
+	mci_writel(host, TMOUT, 0xFFFFFFFF);
+
 	mci_writel(host, RINTSTS, 0xFFFFFFFF);
 	mci_writel(host, INTMASK, SDMMC_INT_CMD_DONE | SDMMC_INT_DATA_OVER |
 		   SDMMC_INT_TXDR | SDMMC_INT_RXDR |
-- 
1.8.3