From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751756AbWJWHre (ORCPT ); Mon, 23 Oct 2006 03:47:34 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751773AbWJWHre (ORCPT ); Mon, 23 Oct 2006 03:47:34 -0400 Received: from fmmailgate05.web.de ([217.72.192.243]:31674 "EHLO fmmailgate05.web.de") by vger.kernel.org with ESMTP id S1751756AbWJWHrd convert rfc822-to-8bit (ORCPT ); Mon, 23 Oct 2006 03:47:33 -0400 Reveived: from web.de by fmmailgate05.web.de (Postfix) with SMTP id C385B2561E6 for ; Mon, 23 Oct 2006 09:47:00 +0200 (CEST) Date: Mon, 23 Oct 2006 09:47:00 +0200 Message-Id: <1381032543@web.de> MIME-Version: 1.0 From: Christian stahl To: linux-kernel@vger.kernel.org Subject: 2.6.18.1 hangs after resuming from apm suspend Organization: http://freemail.web.de/ Content-Type: text/plain; charset=iso-8859-15 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org After upgrading from 2.6.16.20 to 2.6.18.1 my Siemens Scenic Mobile 750AGP Notebook hangs after resuming from suspend. However resuming from suspend works properly if: - the prism 2.5 WLAN card is removed before suspending - the prism 2.5 WLAN is removed after resuming Here's the content of /proc/interrupts: 0: 466068 XT-PIC timer 1: 2282 XT-PIC i8042 2: 0 XT-PIC cascade 7: 780738 XT-PIC yenta, pcmcia1.0 9: 1 XT-PIC yenta 10: 0 XT-PIC ES1938 11: 1 XT-PIC uhci_hcd:usb1 12: 48503 XT-PIC i8042 14: 2935 XT-PIC ide0 NMI: 0 ERR: 0 This is what happens after initiating apm -s; hostap_cs: CS_EVENT_PM_SUSPEND wifi0: removed pending cmd_queue entry (type=0, cmd=0x0021, param0=0xfc28) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. PM: Writing back config space on device 0000:00:00.0 at offset 1 (was a2100106, writing 22100106) PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 2a0e0e0, writing 22a0e0e0) PCI: Enabling device 0000:00:07.2 (0000 -> 0001) PCI: Found IRQ 11 for device 0000:00:07.2 usb usb1: root hub lost power or was reset PM: Writing back config space on device 0000:00:08.0 at offset b (was 3e110a, writing 8898125d) PCI: Enabling device 0000:00:08.0 (0000 -> 0001) PCI: Found IRQ 10 for device 0000:00:08.0 PM: Writing back config space on device 0000:00:14.0 at offset 1 (was 2100000, writing 2100007) PCI: Found IRQ 9 for device 0000:00:14.0 PCI: Sharing IRQ 9 with 0000:01:00.0 wifi0: hfa384x_cmd: command was not completed (res=0, entry=c5e384a0, type=0, cmd=0x0021, param0=0xfc28, EVSTAT=ffff INTEN=ffff) wifi0: interrupt delivery does not seem to work wifi0: hfa384x_get_rid: CMDCODE_ACCESS failed (res=-110, rid=fc28, len=2) Could not read current WEP flags. wifi0: encryption setup failed Could not read current WEP flags. wifi0: encryption setup failed Could not read current WEP flags. wifi0: encryption setup failed Could not read current WEP flags. wifi0: encryption setup failed Could not read current WEP flags. wifi0: encryption setup failed PM: Writing back config space on device 0000:00:14.1 at offset 1 (was 82100000, writing 2100007) PCI: Found IRQ 7 for device 0000:00:14.1 hostap_cs: CS_EVENT_PM_RESUME wifi0: card already removed or not configured during shutdown wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK wifi0: Interrupt, but dev not OK printk: 756711 messages suppressed. wifi0: Interrupt, but dev not OK pccard: card ejected from slot 1 wifi0: cnfAuthentication setting to 0x1 failed Could not read current WEP flags. wifi0: encryption setup failed wlan0: JoinRequest 00:0f:66:d3:14:60 failed prism2_hw_init: initialized in 5318 ms wifi0: prism2_enable_aux_port - timeout - reg=0xffff wifi0: prism2_enable_aux_port - timeout - reg=0xffff wifi0: valid PDA not found SWSUPPORT0 write/read failed: FFFF != 8A32 hostap_cs: Initialization failed wifi0: card already removed or not configured during shutdown hub 1-0:1.0: over-current change on port 1 wifi0: card already removed or not configured during shutdown hub 1-0:1.0: over-current change on port 2 [stalls here until the card is being removed and hostap_cs gets unloaded] _______________________________________________________________________ Viren-Scan für Ihren PC! Jetzt für jeden. Sofort, online und kostenlos. Gleich testen! http://www.pc-sicherheit.web.de/freescan/?mc=022222