From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] regulator: lp3971: Convert to devm_regulator_register
Date: Wed, 13 Nov 2013 14:52:26 +0800 [thread overview]
Message-ID: <1384325546.7101.2.camel@phoenix> (raw)
Both num_regulators and **rdev are no longer required after this conversion,
thus remove them from struct lp3971.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/lp3971.c | 43 ++++++-------------------------------------
1 file changed, 6 insertions(+), 37 deletions(-)
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index 947c05f..3b1102b 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -25,8 +25,6 @@ struct lp3971 {
struct device *dev;
struct mutex io_lock;
struct i2c_client *i2c;
- int num_regulators;
- struct regulator_dev **rdev;
};
static u8 lp3971_reg_read(struct lp3971 *lp3971, u8 reg);
@@ -383,42 +381,27 @@ static int setup_regulators(struct lp3971 *lp3971,
{
int i, err;
- lp3971->num_regulators = pdata->num_regulators;
- lp3971->rdev = kcalloc(pdata->num_regulators,
- sizeof(struct regulator_dev *), GFP_KERNEL);
- if (!lp3971->rdev) {
- err = -ENOMEM;
- goto err_nomem;
- }
-
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
struct regulator_config config = { };
struct lp3971_regulator_subdev *reg = &pdata->regulators[i];
+ struct regulator_dev *rdev;
config.dev = lp3971->dev;
config.init_data = reg->initdata;
config.driver_data = lp3971;
- lp3971->rdev[i] = regulator_register(®ulators[reg->id],
- &config);
- if (IS_ERR(lp3971->rdev[i])) {
- err = PTR_ERR(lp3971->rdev[i]);
+ rdev = devm_regulator_register(lp3971->dev,
+ ®ulators[reg->id], &config);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
dev_err(lp3971->dev, "regulator init failed: %d\n",
err);
- goto error;
+ return err;
}
}
return 0;
-
-error:
- while (--i >= 0)
- regulator_unregister(lp3971->rdev[i]);
- kfree(lp3971->rdev);
- lp3971->rdev = NULL;
-err_nomem:
- return err;
}
static int lp3971_i2c_probe(struct i2c_client *i2c,
@@ -460,19 +443,6 @@ static int lp3971_i2c_probe(struct i2c_client *i2c,
return 0;
}
-static int lp3971_i2c_remove(struct i2c_client *i2c)
-{
- struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
- int i;
-
- for (i = 0; i < lp3971->num_regulators; i++)
- regulator_unregister(lp3971->rdev[i]);
-
- kfree(lp3971->rdev);
-
- return 0;
-}
-
static const struct i2c_device_id lp3971_i2c_id[] = {
{ "lp3971", 0 },
{ }
@@ -485,7 +455,6 @@ static struct i2c_driver lp3971_i2c_driver = {
.owner = THIS_MODULE,
},
.probe = lp3971_i2c_probe,
- .remove = lp3971_i2c_remove,
.id_table = lp3971_i2c_id,
};
--
1.8.1.2
next reply other threads:[~2013-11-13 6:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-13 6:52 Axel Lin [this message]
2013-11-13 6:55 ` [PATCH 2/2] regulator: lp3972: Convert to devm_regulator_register Axel Lin
2013-11-13 13:26 ` Mark Brown
2013-11-13 13:25 ` [PATCH 1/2] regulator: lp3971: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384325546.7101.2.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).