From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] regulator: lp3972: Convert to devm_regulator_register
Date: Wed, 13 Nov 2013 14:55:14 +0800 [thread overview]
Message-ID: <1384325714.7101.4.camel@phoenix> (raw)
In-Reply-To: <1384325546.7101.2.camel@phoenix>
Both num_regulators and **rdev are no longer required after this conversion,
thus remove them from struct lp3972.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/lp3972.c | 41 ++++++-----------------------------------
1 file changed, 6 insertions(+), 35 deletions(-)
diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 093e6f4..aea485a 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -22,8 +22,6 @@ struct lp3972 {
struct device *dev;
struct mutex io_lock;
struct i2c_client *i2c;
- int num_regulators;
- struct regulator_dev **rdev;
};
/* LP3972 Control Registers */
@@ -478,41 +476,27 @@ static int setup_regulators(struct lp3972 *lp3972,
{
int i, err;
- lp3972->num_regulators = pdata->num_regulators;
- lp3972->rdev = kcalloc(pdata->num_regulators,
- sizeof(struct regulator_dev *), GFP_KERNEL);
- if (!lp3972->rdev) {
- err = -ENOMEM;
- goto err_nomem;
- }
-
/* Instantiate the regulators */
for (i = 0; i < pdata->num_regulators; i++) {
struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
struct regulator_config config = { };
+ struct regulator_dev *rdev;
config.dev = lp3972->dev;
config.init_data = reg->initdata;
config.driver_data = lp3972;
- lp3972->rdev[i] = regulator_register(®ulators[reg->id],
- &config);
- if (IS_ERR(lp3972->rdev[i])) {
- err = PTR_ERR(lp3972->rdev[i]);
+ rdev = devm_regulator_register(lp3972->dev,
+ ®ulators[reg->id], &config);
+ if (IS_ERR(rdev)) {
+ err = PTR_ERR(rdev);
dev_err(lp3972->dev, "regulator init failed: %d\n",
err);
- goto error;
+ return err;
}
}
return 0;
-error:
- while (--i >= 0)
- regulator_unregister(lp3972->rdev[i]);
- kfree(lp3972->rdev);
- lp3972->rdev = NULL;
-err_nomem:
- return err;
}
static int lp3972_i2c_probe(struct i2c_client *i2c,
@@ -557,18 +541,6 @@ static int lp3972_i2c_probe(struct i2c_client *i2c,
return 0;
}
-static int lp3972_i2c_remove(struct i2c_client *i2c)
-{
- struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
- int i;
-
- for (i = 0; i < lp3972->num_regulators; i++)
- regulator_unregister(lp3972->rdev[i]);
- kfree(lp3972->rdev);
-
- return 0;
-}
-
static const struct i2c_device_id lp3972_i2c_id[] = {
{ "lp3972", 0 },
{ }
@@ -581,7 +553,6 @@ static struct i2c_driver lp3972_i2c_driver = {
.owner = THIS_MODULE,
},
.probe = lp3972_i2c_probe,
- .remove = lp3972_i2c_remove,
.id_table = lp3972_i2c_id,
};
--
1.8.1.2
next prev parent reply other threads:[~2013-11-13 6:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-13 6:52 [PATCH 1/2] regulator: lp3971: Convert to devm_regulator_register Axel Lin
2013-11-13 6:55 ` Axel Lin [this message]
2013-11-13 13:26 ` [PATCH 2/2] regulator: lp3972: " Mark Brown
2013-11-13 13:25 ` [PATCH 1/2] regulator: lp3971: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384325714.7101.4.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).