From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751837Ab3KOQZg (ORCPT ); Fri, 15 Nov 2013 11:25:36 -0500 Received: from mail-db9lp0252.outbound.messaging.microsoft.com ([213.199.154.252]:16965 "EHLO db9outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751023Ab3KOQZ3 (ORCPT ); Fri, 15 Nov 2013 11:25:29 -0500 X-Forefront-Antispam-Report: CIP:70.37.183.190;KIP:(null);UIP:(null);IPV:NLI;H:mail.freescale.net;RD:none;EFVD:NLI X-SpamScore: 2 X-BigFish: VS2(zz154dIzz1f42h2148h208ch1ee6h1de0h1fdah2073h2146h1202h1e76h1d1ah1d2ah1fc6h1082kzz1de098h8275bh1de097hz2dh2a8h839hd24he5bhf0ah1288h12a5h12a9h12bdh12e5h137ah139eh13b6h1441h1504h1537h162dh1631h1758h1898h18e1h1946h19b5h1ad9h1b0ah1b2fh2222h224fh1fb3h1d0ch1d2eh1d3fh1dc1h1dfeh1dffh1e23h1fe8h1ff5h2218h2216h1155h) From: Nicolin Chen To: , , CC: , , , Subject: [PATCH v2] ASoC: fsl_ssi: Add monaural audio support for non-ac97 interface Date: Sat, 16 Nov 2013 00:25:29 +0800 Message-ID: <1384532729-6588-1-git-send-email-b42378@freescale.com> X-Mailer: git-send-email 1.8.4 MIME-Version: 1.0 Content-Type: text/plain X-OriginatorOrg: freescale.com X-FOPE-CONNECTOR: Id%0$Dn%*$RO%0$TLS%0$FQDN%$TlsDn% Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The normal mode of SSI allows it to send/receive data to/from the first slot of each period. So we can use this normal mode to trick I2S signal by puting/getting data to/from the first slot only (the left channel) so as to support monaural audio playback and recording. Signed-off-by: Nicolin Chen --- Changelog v2: * Moved i2s_mode to ssi_private so that we can save and retore it as needed * And dropped the horrible static thing. sound/soc/fsl/fsl_ssi.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index f43be6d..cba5c4d 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -144,6 +144,7 @@ struct fsl_ssi_private { bool imx_ac97; bool use_dma; bool use_dual_fifo; + u8 i2s_mode; struct clk *clk; struct snd_dmaengine_dai_dma_data dma_params_tx; struct snd_dmaengine_dai_dma_data dma_params_rx; @@ -325,14 +326,13 @@ static irqreturn_t fsl_ssi_isr(int irq, void *dev_id) static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private) { struct ccsr_ssi __iomem *ssi = ssi_private->ssi; - u8 i2s_mode; u8 wm; int synchronous = ssi_private->cpu_dai_drv.symmetric_rates; if (ssi_private->imx_ac97) - i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET; + ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_NORMAL | CCSR_SSI_SCR_NET; else - i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE; + ssi_private->i2s_mode = CCSR_SSI_SCR_I2S_MODE_SLAVE; /* * Section 16.5 of the MPC8610 reference manual says that the SSI needs @@ -349,7 +349,7 @@ static int fsl_ssi_setup(struct fsl_ssi_private *ssi_private) write_ssi_mask(&ssi->scr, CCSR_SSI_SCR_I2S_MODE_MASK | CCSR_SSI_SCR_SYN, CCSR_SSI_SCR_TFR_CLK_DIS | - i2s_mode | + ssi_private->i2s_mode | (synchronous ? CCSR_SSI_SCR_SYN : 0)); write_ssi(CCSR_SSI_STCR_TXBIT0 | CCSR_SSI_STCR_TFEN0 | @@ -517,6 +517,7 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, { struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); struct ccsr_ssi __iomem *ssi = ssi_private->ssi; + unsigned int channels = params_channels(hw_params); unsigned int sample_size = snd_pcm_format_width(params_format(hw_params)); u32 wl = CCSR_SSI_SxCCR_WL(sample_size); @@ -546,6 +547,11 @@ static int fsl_ssi_hw_params(struct snd_pcm_substream *substream, else write_ssi_mask(&ssi->srccr, CCSR_SSI_SxCCR_WL_MASK, wl); + if (!ssi_private->imx_ac97) + write_ssi_mask(&ssi->scr, + CCSR_SSI_SCR_NET | CCSR_SSI_SCR_I2S_MODE_MASK, + channels == 1 ? 0 : ssi_private->i2s_mode); + return 0; } @@ -658,14 +664,13 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = { static struct snd_soc_dai_driver fsl_ssi_dai_template = { .probe = fsl_ssi_dai_probe, .playback = { - /* The SSI does not support monaural audio. */ - .channels_min = 2, + .channels_min = 1, .channels_max = 2, .rates = FSLSSI_I2S_RATES, .formats = FSLSSI_I2S_FORMATS, }, .capture = { - .channels_min = 2, + .channels_min = 1, .channels_max = 2, .rates = FSLSSI_I2S_RATES, .formats = FSLSSI_I2S_FORMATS, -- 1.8.4