From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1753953Ab3KRS42 (ORCPT <rfc822;w@1wt.eu>);
	Mon, 18 Nov 2013 13:56:28 -0500
Received: from mms2.broadcom.com ([216.31.210.18]:4883 "EHLO mms2.broadcom.com"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1752509Ab3KRSzb (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Mon, 18 Nov 2013 13:55:31 -0500
X-Server-Uuid: 4500596E-606A-40F9-852D-14843D8201B2
From: "Tim Kryger" <tim.kryger@linaro.org>
To: "Thierry Reding" <thierry.reding@gmail.com>,
        "Rob Herring" <rob.herring@calxeda.com>,
        "Pawel Moll" <pawel.moll@arm.com>,
        "Mark Rutland" <mark.rutland@arm.com>,
        "Stephen Warren" <swarren@wwwdotorg.org>,
        "Ian Campbell" <ijc+devicetree@hellion.org.uk>,
        "Rob Landley" <rob@landley.net>, "Christian Daudt" <bcm@fixthebug.org>,
        "Grant Likely" <grant.likely@linaro.org>
cc: "Tim Kryger" <tim.kryger@linaro.org>,
        "Linux PWM List" <linux-pwm@vger.kernel.org>,
        "Device Tree List" <devicetree@vger.kernel.org>,
        "Linux Doc List" <linux-doc@vger.kernel.org>,
        "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
        "Broadcom Kernel Feedback List" 
	<bcm-kernel-feedback-list@broadcom.com>,
        "Linux ARM Kernel List" <linux-arm-kernel@lists.infradead.org>,
        "Linaro Patches List" <patches@linaro.org>
Subject: [PATCH 0/5] Add Broadcom Kona PWM Support
Date: Mon, 18 Nov 2013 10:54:56 -0800
Message-ID: <1384800901-21711-1-git-send-email-tim.kryger@linaro.org>
X-Mailer: git-send-email 1.8.0.1
MIME-Version: 1.0
X-WSS-ID: 7E94BDF34RS9134891-01-01
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This series introduces the driver for the Kona PWM controller found in
Broadcom mobile SoCs like bcm281xx and updates the device tree and the
defconfig to enable use of this hardware on the bcm28155 AP board.

It depends on:  https://lkml.org/lkml/2013/11/14/521

Tim Kryger (5):
  Documentation: dt: Add kona-pwm binding
  pwm: kona: Introduce Kona PWM controller support
  ARM: dts: Declare the PWM for bcm11351 (bcm281xx)
  ARM: dts: Enable the PWM for bcm28155 AP board
  ARM: bcm_defconfig: Enable PWM and Backlight

 .../devicetree/bindings/pwm/bcm-kona-pwm.txt       |  24 +++
 arch/arm/boot/dts/bcm11351.dtsi                    |   8 +
 arch/arm/boot/dts/bcm28155-ap.dts                  |   4 +
 arch/arm/configs/bcm_defconfig                     |   2 +
 drivers/pwm/Kconfig                                |  10 +
 drivers/pwm/Makefile                               |   1 +
 drivers/pwm/pwm-bcm-kona.c                         | 226 +++++++++++++++++++++
 7 files changed, 275 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt
 create mode 100644 drivers/pwm/pwm-bcm-kona.c

-- 
1.8.0.1