From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
	id S1753972Ab3KRS5G (ORCPT <rfc822;w@1wt.eu>);
	Mon, 18 Nov 2013 13:57:06 -0500
Received: from mms1.broadcom.com ([216.31.210.17]:4404 "EHLO mms1.broadcom.com"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1753250Ab3KRSz2 (ORCPT <rfc822;linux-kernel@vger.kernel.org>);
	Mon, 18 Nov 2013 13:55:28 -0500
X-Server-Uuid: 06151B78-6688-425E-9DE2-57CB27892261
From: "Tim Kryger" <tim.kryger@linaro.org>
To: "Thierry Reding" <thierry.reding@gmail.com>,
        "Rob Herring" <rob.herring@calxeda.com>,
        "Pawel Moll" <pawel.moll@arm.com>,
        "Mark Rutland" <mark.rutland@arm.com>,
        "Stephen Warren" <swarren@wwwdotorg.org>,
        "Ian Campbell" <ijc+devicetree@hellion.org.uk>,
        "Rob Landley" <rob@landley.net>, "Christian Daudt" <bcm@fixthebug.org>,
        "Grant Likely" <grant.likely@linaro.org>
cc: "Tim Kryger" <tim.kryger@linaro.org>,
        "Linux PWM List" <linux-pwm@vger.kernel.org>,
        "Device Tree List" <devicetree@vger.kernel.org>,
        "Linux Doc List" <linux-doc@vger.kernel.org>,
        "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>,
        "Broadcom Kernel Feedback List" 
	<bcm-kernel-feedback-list@broadcom.com>,
        "Linux ARM Kernel List" <linux-arm-kernel@lists.infradead.org>,
        "Linaro Patches List" <patches@linaro.org>
Subject: [PATCH 4/5] ARM: dts: Enable the PWM for bcm28155 AP board
Date: Mon, 18 Nov 2013 10:55:00 -0800
Message-ID: <1384800901-21711-5-git-send-email-tim.kryger@linaro.org>
X-Mailer: git-send-email 1.8.0.1
In-Reply-To: <1384800901-21711-1-git-send-email-tim.kryger@linaro.org>
References: <1384800901-21711-1-git-send-email-tim.kryger@linaro.org>
MIME-Version: 1.0
X-WSS-ID: 7E94BD031509192164-01-01
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Mark the PWM as enabled on the bcm28155 AP board.

Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Markus Mayer <markus.mayer@linaro.org>
---
 arch/arm/boot/dts/bcm28155-ap.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 08e47c2..2dfca32 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -43,4 +43,8 @@
 		cd-gpios = <&gpio 14 0>;
 		status = "okay";
 	};
+
+	pwm: pwm@3e01a000 {
+		status = "okay";
+	};
 };
-- 
1.8.0.1