From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751850Ab3LABAl (ORCPT ); Sat, 30 Nov 2013 20:00:41 -0500 Received: from ring0.de ([91.143.88.219]:38273 "EHLO smtp.ring0.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751661Ab3LABAW (ORCPT ); Sat, 30 Nov 2013 20:00:22 -0500 X-Spam-Report: * -0.0 NO_RELAYS Informational: message was not relayed via SMTP * -1.9 BAYES_00 BODY: Spamwahrscheinlichkeit nach Bayes-Test: 0-1% * [score: 0.0000] * -0.0 NO_RECEIVED Informational: message has no Received headers From: Sebastian Reichel To: Sebastian Reichel , Tony Lindgren , Anton Vorontsov Cc: David Woodhouse , Grant Likely , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, =?UTF-8?q?Pali=20Roh=C3=A1r?= Subject: [PATCHv2 2/2] dt: binding documentation for isp1704 charger Date: Sun, 1 Dec 2013 02:00:11 +0100 Message-Id: <1385859611-26532-3-git-send-email-sre@debian.org> X-Mailer: git-send-email 1.8.4.3 In-Reply-To: <1385859611-26532-1-git-send-email-sre@debian.org> References: <20131114175227.GH10317@atomide.com> <1385859611-26532-1-git-send-email-sre@debian.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add devicetree binding documentation for isp1704-charger. Signed-off-by: Sebastian Reichel --- Documentation/devicetree/bindings/power/isp1704.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/isp1704.txt diff --git a/Documentation/devicetree/bindings/power/isp1704.txt b/Documentation/devicetree/bindings/power/isp1704.txt new file mode 100644 index 0000000..fa35969 --- /dev/null +++ b/Documentation/devicetree/bindings/power/isp1704.txt @@ -0,0 +1,17 @@ +Binding for NXP ISP1704 USB Charger Detection + +Required properties: +- compatible: Should contain one of the following: + * "nxp,isp1704" +- nxp,enable-gpio: Should contain a phandle + gpio-specifier + to the GPIO pin connected to the chip's enable pin. +- usb-phy: Should contain a phandle to the USB PHY + the ISP1704 is connected to. + +Example: + +isp1704 { + compatible = "nxp,isp1704"; + nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>; + usb-phy = <&usb2_phy>; +}; -- 1.8.4.3