From: Dave Young <dyoung@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-efi@vger.kernel.org, x86@kernel.org, mjg59@srcf.ucam.org,
hpa@zytor.com, James.Bottomley@HansenPartnership.com,
vgoyal@redhat.com, ebiederm@xmission.com, horms@verge.net.au,
kexec@lists.infradead.org, bp@alien8.de, greg@kroah.com,
matt@console-pimps.org, toshi.kani@hp.com
Subject: [PATCH v5 10/14] efi: only print saved efi runtime maps instead of all memmap ranges for kexec
Date: Mon, 9 Dec 2013 17:42:23 +0800 [thread overview]
Message-ID: <1386582147-9802-11-git-send-email-dyoung@redhat.com> (raw)
In-Reply-To: <1386582147-9802-1-git-send-email-dyoung@redhat.com>
For kexec/kdump kernel efi runtime mappings are saved, printing original whole
memmap ranges does not make sense anymore. So introduce a new function to only
print runtime maps in case kexec/kdump kernel is used.
changelog:
Matt: use efi_setup instead of esdata
share function print_efi_memmap for both normal and kexec boot.
Signed-off-by: Dave Young <dyoung@redhat.com>
---
arch/x86/platform/efi/efi.c | 24 +++++++++++++++++-------
1 file changed, 17 insertions(+), 7 deletions(-)
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index 69a6ec2..94a1cbc 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -423,19 +423,16 @@ int __init efi_memblock_x86_reserve_range(void)
return 0;
}
-static void __init print_efi_memmap(void)
+static void __init print_efi_memmap(void *map, int nr_map, int md_size)
{
#ifdef EFI_DEBUG
efi_memory_desc_t *md;
void *p;
int i;
- for (p = memmap.map, i = 0;
- p < memmap.map_end;
- p += memmap.desc_size, i++) {
+ for (p = map, i = 0; i < nr_map; p += md_size, i++) {
md = p;
- pr_info("mem%02u: type=%u, attr=0x%llx, "
- "range=[0x%016llx-0x%016llx) (%lluMB)\n",
+ pr_info("mem%02u: type=%u, attr=0x%llx, range=[0x%016llx-0x%016llx) (%lluMB)\n",
i, md->type, md->attribute, md->phys_addr,
md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
(md->num_pages >> (20 - EFI_PAGE_SHIFT)));
@@ -797,7 +794,20 @@ void __init efi_init(void)
x86_platform.set_wallclock = efi_set_rtc_mmss;
}
#endif
- print_efi_memmap();
+ if (efi_setup) {
+ int s;
+ struct efi_setup_data *data;
+
+ s = sizeof(*data) + nr_efi_runtime_map * sizeof(data->map[0]);
+ data = early_memremap(efi_setup, s);
+ if (!data)
+ return;
+ print_efi_memmap(data->map, nr_efi_runtime_map,
+ sizeof(data->map[0]));
+ early_memunmap(data, s);
+ } else {
+ print_efi_memmap(memmap.map, memmap.nr_map, memmap.desc_size);
+ }
}
void __init efi_late_init(void)
--
1.8.3.1
next prev parent reply other threads:[~2013-12-09 9:45 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-09 9:42 [PATCH v5 00/14] kexec kernel efi runtime support Dave Young
2013-12-09 9:42 ` [PATCH v5 01/14] x86/mm: sparse warning fix for early_memremap Dave Young
2013-12-09 15:05 ` Borislav Petkov
2013-12-10 2:12 ` Dave Young
2013-12-11 10:20 ` Matt Fleming
2013-12-11 11:12 ` Borislav Petkov
2013-12-12 2:06 ` Dave Young
2013-12-09 9:42 ` [PATCH v5 02/14] efi: use early_memremap and early_memunmap Dave Young
2013-12-11 10:39 ` Matt Fleming
2013-12-11 11:02 ` Leif Lindholm
2013-12-11 11:32 ` Matt Fleming
2013-12-11 15:17 ` Mark Salter
2013-12-13 15:51 ` Leif Lindholm
2013-12-16 1:50 ` Dave Young
2013-12-12 2:04 ` Dave Young
2013-12-11 17:38 ` Borislav Petkov
2013-12-09 9:42 ` [PATCH v5 03/14] efi: remove unused variables in __map_region Dave Young
2013-12-09 9:42 ` [PATCH v5 04/14] efi: add a wrapper function efi_map_region_fixed Dave Young
2013-12-09 9:42 ` [PATCH v5 05/14] efi: reserve boot service fix Dave Young
2013-12-09 9:42 ` [PATCH v5 06/14] efi: cleanup efi_enter_virtual_mode function Dave Young
2013-12-09 9:42 ` [PATCH v5 07/14] efi: export more efi table variable to sysfs Dave Young
2013-12-11 18:32 ` Borislav Petkov
2013-12-12 2:15 ` Dave Young
2013-12-09 9:42 ` [PATCH v5 08/14] efi: export efi runtime memory mapping " Dave Young
2013-12-11 18:55 ` Borislav Petkov
2013-12-12 2:36 ` Dave Young
2013-12-12 7:13 ` Dave Young
2013-12-12 20:36 ` Borislav Petkov
2013-12-13 7:20 ` Dave Young
2013-12-12 20:53 ` Borislav Petkov
2013-12-13 7:26 ` Dave Young
2013-12-13 12:30 ` Matt Fleming
2013-12-16 1:33 ` Dave Young
2013-12-16 3:02 ` Dave Young
2013-12-16 6:02 ` Dave Young
2013-12-09 9:42 ` [PATCH v5 09/14] efi: passing kexec necessary efi data via setup_data Dave Young
2013-12-11 12:13 ` Matt Fleming
2013-12-11 14:05 ` Borislav Petkov
2013-12-12 2:11 ` Dave Young
2013-12-12 2:10 ` Dave Young
2013-12-11 22:20 ` Borislav Petkov
2013-12-12 3:06 ` Dave Young
2013-12-12 6:25 ` Dave Young
2013-12-12 7:17 ` Dave Young
2013-12-12 21:04 ` Borislav Petkov
2013-12-13 7:27 ` Dave Young
2013-12-09 9:42 ` Dave Young [this message]
2013-12-13 16:01 ` [PATCH v5 10/14] efi: only print saved efi runtime maps instead of all memmap ranges for kexec Borislav Petkov
2013-12-16 2:00 ` Dave Young
2013-12-16 11:33 ` Borislav Petkov
2013-12-17 6:34 ` Dave Young
2013-12-17 15:58 ` Borislav Petkov
2013-12-18 2:06 ` Dave Young
2013-12-09 9:42 ` [PATCH v5 11/14] x86: add xloadflags bit for efi runtime support on kexec Dave Young
2013-12-09 9:42 ` [PATCH v5 12/14] x86: export x86 boot_params to sysfs Dave Young
2013-12-13 20:04 ` Borislav Petkov
2013-12-09 9:42 ` [PATCH v5 13/14] x86: reserve setup_data ranges late after parsing memmap cmdline Dave Young
2013-12-13 20:04 ` Borislav Petkov
2013-12-09 9:42 ` [PATCH v5 14/14] x86: kdebugfs do not use __va for getting setup_data virt addr Dave Young
2013-12-10 23:25 ` [PATCH v5 00/14] kexec kernel efi runtime support Andrew Morton
2013-12-10 23:32 ` Borislav Petkov
2013-12-10 23:38 ` H. Peter Anvin
2013-12-11 12:37 ` Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386582147-9802-11-git-send-email-dyoung@redhat.com \
--to=dyoung@redhat.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=bp@alien8.de \
--cc=ebiederm@xmission.com \
--cc=greg@kroah.com \
--cc=horms@verge.net.au \
--cc=hpa@zytor.com \
--cc=kexec@lists.infradead.org \
--cc=linux-efi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@console-pimps.org \
--cc=mjg59@srcf.ucam.org \
--cc=toshi.kani@hp.com \
--cc=vgoyal@redhat.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox